An Optical Ultrahigh Resolution Spectrograph for Use with Adaptive Optics

J. Ge,B. Jacobsen,J.R.P. Angel,N. Woolf,J. H. Black,M. Lloyd-Hart,P. Gray,R. Q. Fugate

DOI: https://doi.org/10.48550/arXiv.astro-ph/9607146

1996-07-29

Astrophysics

Abstract:A prototype ultrahigh resolution spectrograph has been built with an adaptive optics telescope. It provides $250,000$ resolving power, 300 \AA\ wavelength coverage and 0.8\% efficiency.

What problem does this paper attempt to address?

Adaptive optics for high resolution spectroscopy: A direct application with the future NIRPS spectrograph

Uriel Conod,Nicolas Blind,François Wildi,Francesco Pepe

DOI: https://doi.org/10.1117/12.2233651

2016-08-03

Abstract:Radial velocity instruments require high spectral resolution and extreme thermo-mecanical stability, even more difficult to achieve in near-infra red (NIR) where the spectrograph has to be cooled down. For a seeing-limited spectrograph, the price of high spectral resolution is an increased instrument volume, proportional to the diameter of the primary mirror. A way to control the size, cost, and stability of radial velocity spectrographs is to reduce the beam optical etendue thanks to an Adaptive Optics (AO) system. While AO has revolutionized the field of high angular resolution and high contrast imaging during the last 20 years, it has not yet been (successfully) used as a way to control spectrographs size, especially in the field of radial velocities. In this work we present the AO module of the future NIRPS spectrograph for the ESO 3.6 m telescope, that will be feed with multi-mode fibers. We converge to an AO system using a Shack-Hartmann wavefront sensor with 14x14 subapertures, able to feed 50% of the energy into a 0.4" fiber in the range of 0.98 to 1.8 $\mu m$ for M-type stars as faint as I=12.

Instrumentation and Methods for Astrophysics
High-resolution, flat-field, plane-grating, f/10 spectrograph with off-axis parabolic mirrors

Stephanie L Schieffer,Nathan W Rimington,Ved P Nayyar,W Andreas Schroeder,James W Longworth

DOI: https://doi.org/10.1364/ao.46.003095

2007-06-01

Abstract:A high-resolution, flat-field, plane-grating, f/10 spectrometer based on the novel design proposed by Gil and Simon [Appl. Opt. 22, 152 (1983)] is demonstrated. The spectrometer design employs off-axis parabolic collimation and camera mirrors in a configuration that eliminates spherical aberrations and minimizes astigmatism, coma, and field curvature in the image plane. In accordance with theoretical analysis, the performance of this spectrometer achieves a high spatial resolution over the large detection area, which is shown to be limited only by the quality of its optics and their proper alignment within the spatial resolution of a 13 microm x 13 microm pixelated CCD detector. With a 1500 lines/mm grating in first order, the measured spectral resolving power of lambda/Dlambda = 2.5(+/-0.5) x 10(4) allows the clear resolution of the violet Ar(I) doublet at 419.07 and 419.10 nm.
Efficient ultra-broadband low-resolution astrophotonic spectrographs

Pradip Gatkine,Greg Sercel,Nemanja Jovanovic,Ronald Broeke,Katarzyna Lawniczuk,Marco Passoni,Ashok Balakrishnan,Serge Bidnyk,Jielong Yin,Jeffrey Jewell,J. Kent Wallace,Dimitri Mawet

2024-04-03

Abstract:Broadband low-resolution near-infrared spectrographs in a compact form are crucial for ground- and space-based astronomy and other fields of sensing. Astronomical spectroscopy poses stringent requirements including high efficiency, broad band operation ($>$ 300 nm), and in some cases, polarization insensitivity. We present and compare experimental results from the design, fabrication, and characterization of broadband (1200 - 1650 nm) arrayed waveguide grating (AWG) spectrographs built using the two most promising low-loss platforms - Si$_3$N$_4$ (rectangular waveguides) and doped-SiO$_2$ (square waveguides). These AWGs have a resolving power ($\lambda/\Delta\lambda$) of ~200, a free spectral range of ~ 200-350 nm, and a small footprint of ~ 50-100 mm$^2$. The peak overall (fiber-chip-fiber) efficiency of the doped-SiO$_2$ AWG was ~ 79\% (1 dB), and it exhibited a negligible polarization-dependent shift compared to the channel spacing. For Si$_3$N$_4$ AWGs, the peak overall efficiency in TE mode was ~ 50\% (3 dB), and the main loss component was found to be fiber-to-chip coupling losses. These broadband AWGs are key to enabling compact integrations such as multi-object spectrographs or dispersion back-ends for other astrophotonic devices such as photonic lanterns or nulling interferometers.

Instrumentation and Methods for Astrophysics,Instrumentation and Detectors,Optics
Optical system for extremely large spectroscopic survey telescope

Ding-qiang Su,Hua Bai,Xiangyan Yuan,Xiangqun Cui

DOI: https://doi.org/10.1007/s11433-023-2316-3

2024-03-19

Abstract:This article presents research work on a spectroscopic survey telescope. Our idea is as follows: for such a telescope, a pure reflecting optical system is designed, which should have an aperture and a field of view (FOV) both as large as possible and excellent image quality, and then a strip lensm (lens-prism) atmospheric dispersion corrector (S-ADC) is added, only for correcting the atmospheric dispersion. Given the fund limitation and the simplicity of scaling up, some 12-m telescopes are designed as examples. Su, Korsch, and Meinel put forward the four-mirror Nasmyth systems I and II, which are used in this paper. FOVs of 1.5°, 2°, and 2.5° are selected. For all systems, the image qualities are excellent. Because the S-ADC relaxes the optical glass size restriction, this 12-m telescope with a FOV of 2.5° can be magnified in proportion to a 16-m telescope. Its etendue (from French étendue) and focal surface will now be the largest in the world. In such a telescope, a pure reflecting optical system can also be obtained. A subsequent coudé system is designed with excellent image quality.

Instrumentation and Methods for Astrophysics
Low Order Adaptive Optics with Very Faint Reference Stars

Craig Mackay

DOI: https://doi.org/10.48550/arXiv.1911.07540

2019-11-18

Abstract:It is widely believed that adaptive optics only has a role in correcting turbulent wavefronts on large telescopes using very bright reference stars. Unfortunately these are very scarce and many astronomical targets require wavefront correction to work over much of the sky. We therefore need to be able to use very much fainter reference objects. Laser guide stars in principle can allow 0.1 arcsecond resolution but have a number of severe technical problems that limit their application. Our aims are to provide imaging at even higher resolution than Hubble. Lucky Imaging completely eliminates the tip-tilt errors in astronomical wavefront detection. Most of the power that remains is in low order, large scale structures. These may be detected with high sensitivity using photon-counting EMCCD detectors working at high frame rate, up to ~100Hz. With a new design of curvature wavefront sensor, wavefront errors may be measured and corrected to give near diffraction-limited performance on large groundbased telescopes in the visible. Reference stars (and reference compact galaxies) fainter than I~17.5 mag may be used routinely. This paper will describe how these work, what detector and other hardware is needed and what software should be used to measure the wavefront errors and drive deformable mirror hardware. The software techniques that are used are those routinely applied for MRI and CT imaging. They are fast and relatively easy to implement. The net effect is that imaging systems can be constructed that improve substantially over Hubble resolution from the ground for a relatively modest sum of money.

Instrumentation and Methods for Astrophysics
HighSpec: A High-Resolution Spectrograph for the MAST Telescope Array

Yahel Sofer Rimalt,Sagi Ben-Ami,Eran Ofek,Na'ama Hallakoun,Ido Irani,Oren Ironi,Jani Achren,Alex Bichkovsky,Arie Blumenzweig,Ofir Hershko,Hanindyo Kuncarayakti,Seppo Mattila,Tsevi Mazeh,Gleb Mikhnevich,David Polishook,Ofer Yaron

DOI: https://doi.org/10.1117/12.3020206

2024-08-30

Abstract:We present the updated design of HighSpec, a high-resolution $\mathcal{R} \sim 20,000$ spectrograph designed for the Multi Aperture Spectroscopic Telescope (MAST). HighSpec offers three observing modes centered at the Ca II H&K, Mg b triplet, and H$\alpha$ lines. Each mode is supported by a highly optimized ion-etched grating, contributing to an exceptional instrument peak efficiency of $\gtrsim85\%$ for the two latter bands ($\gtrsim55\%$ for the Ca II H&K band). Optimizing throughput over wavelength coverage ($\Delta \lambda=10-17$ nm), HighSpec enables the precise measurement of spectral lines from faint targets. This approach is especially relevant for stellar object studies, specifically of WDs, which are intrinsically faint and have few spectroscopic lines. Each observing mode was tailored to target spectral features essential for WD research. Its integration with MAST, an array of 20 custom-designed telescopes that can function as a single large telescope (equivalent to a $2.7$ m telescope in collecting area) or multiplexing over the entire sky, provides unique adaptability for extensive and effective spectroscopic campaigns. Currently in its final assembly and testing stages, HighSpec's on-sky commissioning is scheduled for 2025.

Instrumentation and Methods for Astrophysics,Solar and Stellar Astrophysics
Ultrahigh-resolution Spectrometer Based on 19 Integrated Gratings

An-Qing Jiang,Kai-Yan Zang,Hua-Tian Tu,Jian-Ke Chen,Wei-Jie Lu,Osamu Yoshie,Xiao-Ping Wang,Xiao-Dong Xiang,Young-Pak Lee,Bing Chen,Yu-Xiang Zheng,Song-You Wang,Hai-Bin Zhao,Yue-Mei Yang,Liang-Yao Chen

DOI: https://doi.org/10.1038/s41598-019-46792-7

IF: 4.6

2019-01-01

Scientific Reports

Abstract:Optical spectrometers play a key role in acquiring rich photonic information in both scientific research and a wide variety of applications. In this work, we present a new spectrometer with an ultrahigh resolution of better than 0.012 nm/pixel in the 170–600 nm spectral region using a grating-integrated module that consists of 19 subgratings without any moving parts. By using two-dimensional (2D) backsideilluminated complementary metal-oxide-semiconductor (BSI-CMOS) array detector technology with 2048 × 2048 pixels, a high data acquisition speed of approximately 25 spectra per second is achieved. The physical photon-sensing size of the detector along the one-dimensional wavelength direction is enhanced by a factor of 19 to approximately 428 mm, or 38912 pixels, to satisfy the requirement of seamless connection between two neighboring subspectral regions without any missing wavelengths throughout the entire spectral region. As tested with a mercury lamp, the system has advanced performance capabilities characterized by the highest k parameter reported to date, being approximately 3.58 × 104, where k = (working wavelength region)/(pixel resolution). Data calibration and analysis as well as a method of reducing background noise more efficiently are also discussed. The results presented in this work will stimulate further research on precision spectrometers based on advanced BSI-CMOS array detectors in the future.
Enabling Technologies for Visible Adaptive Optics: The Magellan Adaptive Secondary VisAO Camera

Derek Kopon,Jared R. Males,Laird M. Close,Victor Gasho

DOI: https://doi.org/10.48550/arXiv.1008.0146

2010-08-01

Abstract:Since its beginnings, diffraction-limited ground-based adaptive optics (AO) imaging has been limited to wavelengths in the near IR ({\lambda} > 1 micron) and longer. Visible AO ({\lambda} < 1 micron) has proven to be difficult because shorter wavelengths require wavefront correction on very short spatial and temporal scales. The pupil must be sampled very finely, which requires dense actuator spacing and fine wavefront sampling with large dynamic range. In addition, atmospheric dispersion is much more significant in the visible than in the near-IR. Imaging over a broad visible band requires a very good Atmospheric Dispersion Corrector (ADC). Even with these technologies, our AO simulations using the CAOS code, combined with the optical and site parameters for the 6.5m Magellan telescope, demonstrate a large temporal variability of visible ({\lambda}=0.7 micron) Strehl on timescales of 50 ms. Over several hundred milliseconds, the visible Strehl can be as high at 50% and as low as 10%. Taking advantage of periods of high Strehl requires either the ability to read out the CCD very fast, thereby introducing significant amounts of read-noise, or the use of a fast asynchronous shutter that can block the low-Strehl light. Our Magellan VisAO camera will use an advanced ADC, a high-speed shutter, and our 585 actuator adaptive secondary to achieve broadband (0.5-1.0 micron) diffraction limited images on the 6.5m Magellan Clay telescope in Chile at Las Campanas Observatory. These will be the sharpest and deepest visible direct images taken to date with a resolution of 17 mas, a factor of 2.7 better than the diffraction limit of the Hubble Space Telescope.

Instrumentation and Methods for Astrophysics
V(WF)$^2$S: Very Wide Field WaveFront Sensor for GLAO

Olivier Lai,Mark Chun,Stefan Kuiper,Niek Doelman,Marcel Carbillet,Mamadou N'Diaye,Frantz Martinache,Lyu Abe,Jean-Pierre Rivet,Dirk Schmidt

2023-10-11

Abstract:Adaptive optics is a technique mostly used on large telescopes. It turns out to be challenging for smaller telescopes (0.5~2m) due to the small isoplanatic angle, small subapertures and high correction speeds needed at visible wavelengths, requiring bright stars for guiding, severely limiting the sky coverage. NGS SCAO is ideal for planetary objects but remains limited for general purpose observing. The approach we consider is a compromise between image quality gain and sky coverage: we propose to partially improve the image quality anywhere in the sky instead of providing the diffraction limit around a few thousand bright stars. We suggest a new solution based on multiple AO concepts brought together: The principle is based on a rotating Foucault test, like the first AO concept proposed by H. Babcock in 1953, on the Ground Layer Adaptive Optics, proposed by Rigaut and Tokovinin in the early 2000s, and on the idea of Layer-oriented MCAO and the pupil-plane wavefront analysis by R. Ragazzoni. We propose to combine these techniques to use all the light available in a large field to measure the ground layer turbulence and enable the high angular resolution imaging of regions of the sky (e.g., nebulas, galaxies) inaccessible to traditional AO systems. The motivation to develop compact and robust AO system for small telescopes is two-fold: On the one hand, universities often have access to small telescopes as part of their education programs. Also, researchers in countries with fewer resources could also benefit from reliable adaptive optics system on smaller telescopes for research and education purposes. On the other hand, amateur astronomers and enthusiasts want improved image quality for visual observation and astrophotography. Implementing readily accessible adaptive optics in astronomy clubs would also likely have a significant impact on citizen science.

Instrumentation and Methods for Astrophysics
Enhancing stellar spectroscopy with extreme adaptive optics and photonics

Nemanja Jovanovic,Christian Schwab,Nick Cvetojevic,Olivier Guyon,Frantz Martinache

DOI: https://doi.org/10.1088/1538-3873/128/970/121001

2016-11-09

Abstract:Extreme adaptive optics systems are now in operation across the globe. These systems, capable of high order wavefront correction, deliver Strehl ratios of 90% in the near-infrared. Originally intended for the direct imaging of exoplanets, these systems are often equipped with advanced coronagraphs that suppress the on-axis-star, interferometers to calibrate wavefront errors, and low order wavefront sensors to stabilize any tip/tilt residuals to a degree never seen before. Such systems are well positioned to facilitate the detailed spectroscopic characterization of faint substellar companions at small angular separations from the host star. Additionally, the increased light concentration of the point-spread function and the unprecedented stability create opportunities in other fields of astronomy as well, including spectroscopy. With such Strehl ratios, efficient injection into single-mode fibers or photonic lanterns becomes possible. With diffraction-limited components feeding the instrument, calibrating a spectrograph's line profile becomes considerably easier, as modal noise or imperfect scrambling of the fiber output are no longer an issue. It also opens up the possibility of exploiting photonic technologies for their advanced functionalities, inherent replicability, and small, lightweight footprint to design and build future instrumentation. In this work, we outline how extreme adaptive optics systems will enable advanced photonic and diffraction-limited technologies to be exploited in spectrograph design and the impact it will have on spectroscopy. We illustrate that the precision of an instrument based on these technologies, would be limited by the spectral content and stellar noise on cool stars and capable of achieving a radial velocity precision of several m/s; the level required for detecting an exo-Earth in the HZ of a nearby M-dwarf.

Instrumentation and Methods for Astrophysics
Mapping the aberrations of a wide-field spectrograph using a photonic comb

Joss Bland-Hawthorn,Janez Kos,Christopher Betters,Gayandhi De Silva,John O'Byrne,Rob Patterson,Sergio Leon-Saval

DOI: https://doi.org/10.1364/OE.25.015614

2017-04-28

Abstract:We demonstrate a new approach to calibrating the spectral-spatial response of a wide-field spectrograph using a fibre etalon comb. Conventional wide-field instruments employed on front-line telescopes are mapped with a grid of diffraction-limited holes cut into a focal plane mask. The aberrated grid pattern in the image plane typically reveals n-symmetric (e.g. pincushion) distortion patterns over the field arising from the optical train. This approach is impractical in the presence of a dispersing element because the diffraction-limited spots in the focal plane are imaged as an array of overlapping spectra. Instead we propose a compact solution that builds on recent developments in fibre-based Fabry-Perot etalons. We introduce a novel approach to near-field illumination that exploits a 25cm commercial telescope and the propagation of skew rays in a multimode fibre. The mapping of the optical transfer function across the full field is represented accurately (<0.5% rms residual) by an orthonormal set of Chebyshev moments. Thus we are able to reconstruct the full 4Kx4K CCD image of the dispersed output from the optical fibres using this mapping, as we demonstrate. Our method removes one of the largest sources of systematic error in multi-object spectroscopy.

Instrumentation and Methods for Astrophysics
[Study on an Optical System of Small Ultraviolet Imaging Spectrometer with High Resolution in Broadband].

Cong Hai-fang,Wang Chun-hui,Wang Yu

DOI: https://doi.org/10.3964/j.issn.1000-0593(2013)02-0562-05

2013-01-01

Abstract:An ultraviolet imaging spectrometer was studied based on the principle of the small scale ultraviolet spectral instrument. The scheme composed of an off-axis parabolic mirror telescope and a single toroidal grating spectral imaging system was designed. The optimization of the optical system is the optimum processing for the parameters of the toroidal grating. The optical path function and the aberration equations of the grating were analyzed. The perfect anastigmatism conditions and imaging conditions of the single toroidal grating system were obtained. These two conditions that cannot be satisfied by the algebra calculation method limit the field of view and waveband of the spectrometer. The genetic algorithm was introduced to solve the problem. A solar-blind ultraviolet imaging spectrometer for 200-280 nm was designed to verify the design method. The optimum initial configuration was calculated and simulated. A system with F/# 5.7, focal length 102 mm and high spatial resolution was designed. The modulation transfer functions (MTF) of all fields of view are more than 0.65 in the waveband in the required Nyquist frequency (20 1p x mm(-1)). The design results indicate that the optical system theory can be applied to the small scale ultraviolet imaging spectrometer with high resolution and spectral broadband.
GETTING LUCKY WITH ADAPTIVE OPTICS: FAST ADAPTIVE OPTICS IMAGE SELECTION IN THE VISIBLE WITH A LARGE TELESCOPE

N. M. Law,C. D. Mackay,R. G. Dekany,M. Ireland,J. P. Lloyd,A. M. Moore,J. G. Robertson,P. Tuthill,H. C. Woodruff

DOI: https://doi.org/10.1088/0004-637x/692/1/924

IF: 5.521

2009-02-10

The Astrophysical Journal

Abstract:We describe the results from a new instrument which combines Lucky Imaging and adaptive optics (AO) to give the first routine direct diffraction-limited imaging in the visible on a 5 m telescope. With fast image selection and alignment behind the Palomar AO system we obtained Strehl ratios of 5%–20% at 700 nm in a typical range of seeing conditions, with a median Strehl of approximately 12% when 10% of the input frames are selected. At wavelengths around 700 nm the system gave diffraction-limited 35 mas full width at half-maxima (FWHMs). At 950 nm the output Strehl ratio was as high as 36% and at 500 nm the FWHM resolution was as small as 42 mas, with a low Strehl ratio but with resolution improved by a factor of ∼20 compared to the prevailing seeing. To obtain wider fields we also used multiple Lucky Imaging guide stars in a configuration similar to a ground layer AO system. With eight guide stars but very undersampled data we obtained 300 mas resolution across a 30″ × 30″ field of view in the i′ band.
High-resolution imaging and spectroscopy in the visible from large ground-based telescopes with natural guide stars

Craig Mackay,Tim D. Staley,David King,Frank Suess,Keith Weller

DOI: https://doi.org/10.1117/12.855281

2010-07-09

Abstract:Near-diffraction limited imaging and spectroscopy in the visible on large (8-10 meter) class telescopes has proved to be beyond the capabilities of current adaptive optics technologies, even when using laser guide stars. The need for high resolution visible imaging in any part of the sky suggests that a rather different approach is needed. This paper describes the results of simulations, experiments and astronomical observations that show that a combination of low order adaptive optic correction using a 4-field curvature sensor and fast Lucky Imaging strategies with a photon counting CCD camera systems should deliver 20-25 milliarcsecond resolution in the visible with reference stars as faint as 18.5 magnitude in I band on large telescopes. Such an instrument may be used to feed an integral field spectrograph efficiently using configurations that will also be described.

Instrumentation and Methods for Astrophysics
Adaptive optics for high-resolution imaging

Karen M. Hampson,Raphaël Turcotte,Donald T. Miller,Kazuhiro Kurokawa,Jared R. Males,Na Ji,Martin J. Booth

DOI: https://doi.org/10.1038/s43586-021-00066-7

2021-10-14

Nature Reviews Methods Primers

Abstract:Adaptive optics (AO) is a technique that corrects for optical aberrations. It was originally proposed to correct for the blurring effect of atmospheric turbulence on images in ground-based telescopes and was instrumental in the work that resulted in the Nobel prize-winning discovery of a supermassive compact object at the centre of our galaxy. When AO is used to correct for the eye’s imperfect optics, retinal changes at the cellular level can be detected, allowing us to study the operation of the visual system and to assess ocular health in the microscopic domain. By correcting for sample-induced blur in microscopy, AO has pushed the boundaries of imaging in thick tissue specimens, such as when observing neuronal processes in the brain. In this primer, we focus on the application of AO for high-resolution imaging in astronomy, vision science and microscopy. We begin with an overview of the general principles of AO and its main components, which include methods to measure the aberrations, devices for aberration correction, and how these components are linked in operation. We present results and applications from each field along with reproducibility considerations and limitations. Finally, we discuss future directions.
An adaptive optics upgrade for the Automated Planet Finder Telescope using an adaptive secondary mirror

Rachel Bowens-Rubin,Arjo Bos,Philip Hinz,Bradford Holden,Matt Radovan

DOI: https://doi.org/10.1117/12.2627183

2023-08-29

Abstract:As we enter the era of TESS and JWST, instrumentation that can carry out radial velocity measurements of exoplanet systems is in high demand. We will address this demand by upgrading the UC Lick Observatory's 2.4-meter Automated Planet Finder (APF) telescope with an adaptive optics (AO) system. The AO upgrade will be directly integrated into the APF telescope by replacing the telescope's static secondary mirror with a 61-actuator adaptive secondary mirror (ASM) to minimize the disturbance to the spectrograph optics. This upgrade is enabled by The Netherlands Organization for Applied Scientific Research's (TNO) large-format deformable mirror technology, which will be constructed using a new style of high-efficiency hybrid-variable reluctance actuator. We outline the technical design and manufacturing plan for the proposed APF AO upgrade and simulate the improvement to the science yield using HCIpy. Our simulations predict the AO upgrade will reduce the PSF instabilities due to atmospheric turbulence, concentrating the light on the spectrograph slit by a multiplicative factor of more than two (doubling the telescope's observing efficiency) for targets as dim as I = 14. When completed, the APF adaptive secondary mirror will be among the first pairings of an ASM with a radial velocity spectrograph and become a pathfinder for similar AO systems in telescopes of all sizes.

Instrumentation and Methods for Astrophysics
Design of a Spaceborne, Compact, Off-Axis, Multi-Mirror Optical System Based on Freeform Surfaces

Baohua Wang,Xiaoyong Wang,Huilin Jiang,Yuanyuan Wang,Chao Yang,Yao Meng

DOI: https://doi.org/10.3390/photonics11010051

IF: 2.536

2024-01-05

Photonics

Abstract:Based on the application requirements of high spectral resolutions, high spatial resolutions and wide swatches, a new-generation, high-performance, spaceborne, hyperspectral imaging spectrometer (NGHSI) with a spatial resolution of 15 m and a swatch of 90 km is proposed. The optical system of the NGHSI has a focal length of 1128 mm, an F-number of three, a field of view (FOV) of 7.32° and a slit length of 144 mm. A new off-axis, multi-mirror telescope structure with intermediate images is put forward, which solves the design problem that realizes secondary imaging and good telecentricity at the same time. And a new off-axis lens-compensation Offner configuration is adopted to address the challenge of the high-fidelity design of spectral imaging systems with long slit lengths. The relationship between X-Y polynomials and aberration coefficients is analyzed, and the X-Y polynomial freeform surfaces are used to correct the off-axis aberrations. The design results show that the image quality of the telescope system is close to the diffraction limit. The smile, known as the spectral distortion along the line, and keystone, which is the magnification difference for different wavelengths, of the spectral imaging system are less than 1/10 pixel size. The complete optical system of the NGHSI, including the telescope system and the spectral imaging system, has excellent imaging quality and the layout is compact and reasonable, which realizes the miniaturization design.

optics
Panopticon: a telescope for our times

Will Saunders,Timothy Chin,Michael Goodwin

2024-09-10

Abstract:We present a design for a wide-field spectroscopic telescope. The only large powered mirror is spherical, the resulting spherical aberration is corrected for each target separately, giving exceptional image quality. The telescope is a transit design, but still allows all-sky coverage. Three simultaneous modes are proposed: (a) natural seeing multi-object spectroscopy with 12m aperture over 3dg FoV with ~25,000 targets; (b) multi-object AO with 12m aperture over 3dg FoV with ~100 AO-corrected Integral Field Units each with 4 arcsec FoV; (c) ground layer AO-corrected integral field spectroscopy with 15m aperture and 13 arcmin FoV. Such a telescope would be uniquely powerful for large-area follow-up of imaging surveys; in each mode, the AOmega and survey speed exceed all existing facilities combined. The expected cost of this design is relatively modest, much closer to $500M than $1000M.

Instrumentation and Methods for Astrophysics

An Optical Ultrahigh Resolution Spectrograph for Use with Adaptive Optics

Adaptive optics for high resolution spectroscopy: A direct application with the future NIRPS spectrograph

High-resolution, flat-field, plane-grating, f/10 spectrograph with off-axis parabolic mirrors

Efficient ultra-broadband low-resolution astrophotonic spectrographs

Optical system for extremely large spectroscopic survey telescope

Low Order Adaptive Optics with Very Faint Reference Stars

HighSpec: A High-Resolution Spectrograph for the MAST Telescope Array

Ultrahigh-resolution Spectrometer Based on 19 Integrated Gratings

Enabling Technologies for Visible Adaptive Optics: The Magellan Adaptive Secondary VisAO Camera

V(WF)$^2$S: Very Wide Field WaveFront Sensor for GLAO

Enhancing stellar spectroscopy with extreme adaptive optics and photonics

Mapping the aberrations of a wide-field spectrograph using a photonic comb

[Study on an Optical System of Small Ultraviolet Imaging Spectrometer with High Resolution in Broadband].

GETTING LUCKY WITH ADAPTIVE OPTICS: FAST ADAPTIVE OPTICS IMAGE SELECTION IN THE VISIBLE WITH A LARGE TELESCOPE

High-resolution imaging and spectroscopy in the visible from large ground-based telescopes with natural guide stars

Adaptive optics for high-resolution imaging

An adaptive optics upgrade for the Automated Planet Finder Telescope using an adaptive secondary mirror

Design of a Spaceborne, Compact, Off-Axis, Multi-Mirror Optical System Based on Freeform Surfaces

Panopticon: a telescope for our times