Abstract:Living body or corpse could be replaced with the virtual human tissue model for biomechanical experimental study, which effectively avoids the non-reusability, great social controversy, huge costs and difficulty in extracting parameters, and finally, the accurate analysis results are obtained. Unlike the previous lower limb models, the finite element models of hip and thigh were established based on the concept of muscle group in this paper. The cortical bones of hip bone and femur were set as *MAT_PIECEWISE_LINEAR_ PLASTICITY. The material of cancellous bone was set as *MAT_ELASTIC_PLASTIC_ WITH_DAMAGE_FAILURE. The material of articular cartilage was set as *MAT_ISOTROPIC_ELASTIC. The materials of muscle and fat were set as *MAT_VISCOELASTIC. The accuracy of the finite element model was verified by dynamic three-point bending experiment of the thighs. Mechanical simulation was carried out to the stump-prosthetic socket and the comfort of socks by the established model. The simulation results were all between the upper and lower bounds of the experimental results in the dynamic three-point bending experiment of the thighs where the loads were separately applied to one-third of the distal end of thighs and the middle part of thighs. The simulation results of the stump-prosthetic socket example show that the optimal elastic modulus of silicone pad is 2.5[Formula: see text]MPa. Simulation results of socks comfort show that the distribution of stress and deformation of the anterior and posterior thighs is different when the human lower limbs are in stockings. The established simulation model meets the accuracy requirement and can replace the living body or corpse to carry out biomechanical experimental study. The finite element simulation results converge, and the time to complete a finite element calculation is less than or equal to 10[Formula: see text]min.

Subject-Specific Finite Element Modelling of the Human Hand Complex: Muscle-Driven Simulations and Experimental Validation

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

Development of a feasible finite element digital human hand model

Three-dimensional finite element simulations of the mechanical response of the fingertip to static and dynamic compressions

Development of a Finite Element Musculoskeletal Model with the Ability to Predict Contractions of Three-Dimensional Muscles.

Identification and validation of the dynamic model of a tendon-driven anthropomorphic finger

Biomechatronic Approach to a Multi-Fingered Hand Prosthesis

Analysis on Synergistic Cocontraction of Extrinsic Finger Flexors and Extensors During Flexion Movements: A Finite Element Digital Human Hand Model

A Human-Robot Interaction Modeling Approach for Hand Rehabilitation Exoskeleton Using Biomechanical Technique

Finger Pinch Force Estimation Through Muscle Activations Using a Surface EMG Sleeve on the Forearm

Biomechanical Analysis of the Effect of Finger Joint Configuration on Hand Grasping Performance: Rigid vs Flexible

Estimation of joint contact pressure in the index finger using a hybrid finite element musculoskeletal approach

Analysis and Validation of a 3D Finite Element Model for Human Forearm Fracture

Design of the Anatomically Correct, Biomechatronic Hand

Biomechatronic Design and Control of an Anthropomorphic Artificial Hand for Prosthetic Applications

ESTABLISHMENT AND APPLICATION OF LOWER LIMB FINITE ELEMENT MODEL BASED ON MUSCLE GROUPS

A Biomimetic Tendon-driven Soft Hand Exoskeleton for Finger Extension based on Musculoskeletal and Biomechanical Principles.

An Integrated Virtual Hand Platform for Evaluation of Model-Based Control of Hand Prosthesis.

Design Optimization of Soft Robotic Fingers Biologically Inspired by the Fin Ray Effect with Intrinsic Force Sensing

A Subject-Specific Neuromusculoskeletal Model for Muscle Force Estimation Used in Rehabilitation

A Biorealistic Computational Model Unfolds Human-Like Compliant Properties for Control of Hand Prosthesis