In-Line Co-Processing of Stainless Steel Pickling Sludge Using Argon Oxygen Decarburization Slag Bath: Behavior and Mechanism

Zheng Zhao,Yanling Zhang,Fang Yuan,Tuo Wu
DOI: https://doi.org/10.3390/su16051895
IF: 3.9
2024-02-26
Sustainability
Abstract:Stainless steel pickling sludge (SSPS) is classified as hazardous solid waste, while Argon Oxygen Decarburization (AOD) slag is challenging to utilize due to the leaching toxicity of Cr. This study introduces a novel in-line co-processing technique for AOD slag and SSPS, parallel to the steelmaking process, aimed at metal recovery, sulfur fixation, and slag detoxification: pre-treatment-AOD slag bath approach. The transformations and migrations of sulfur and metal elements, such as Fe and Cr, in the co-processed mixture were analyzed using thermogravimetric–mass spectrometry (TG-MS) and scanning electron microscopy–energy dispersive spectroscopy (SEM-EDS). The results indicated that sulfur in SSPS could be transformed from CaSO4 to CaS under controlled low pre-reduction temperatures (below 800 °C), facilitating its stabilization in the slag and achieving a sulfur fixation rate of over 99%. Metal elements, including iron and chromium, first formed a small portion of spinel (FeCr2O4) during the pre-reduction phase, then Fe-Cr or Fe-Cr-C-based alloy particles were rapidly formed at high temperatures and in the presence of reducers in the slag bath (1550 °C), aggregating and growing spontaneously, ultimately achieving a metal recovery rate of over 95%. Furthermore, a reaction model for SSPS briquettes in the AOD slag bath was established to further reveal the mechanisms of sulfur, iron, and chromium stabilization and migration, thereby providing a basis for the harmless disposal of both materials. The product alloys are expected to be used as additives in stainless steel production, while the harmless slag could be safely utilized in the preparation of cementitious auxiliary materials.
environmental sciences,environmental studies,green & sustainable science & technology
What problem does this paper attempt to address?
The paper primarily addresses the treatment and resource utilization of two industrial wastes: stainless steel pickling sludge (SSPS) and argon oxygen decarburization (AOD) slag. Specifically, the paper introduces a novel online co-processing technology, which involves the co-processing of SSPS and AOD slag at high temperatures during steel production. This technology aims to achieve metal recovery, sulfur fixation, and harmless treatment of the slag. Using thermogravimetric-mass spectrometry (TG-MS) and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) analysis methods, the study investigates the transformation and migration processes of sulfur and metal elements (such as iron and chromium) in the mixture. Key findings of the paper include: - Under controlled low pre-reduction temperatures (below 800°C), sulfur in SSPS can be converted to CaS, which is then stabilized in the slag, achieving a sulfur fixation rate of over 99%. - Metal elements such as iron and chromium initially form a small amount of spinel (FeCr₂O₄), and subsequently, under high temperatures (1550°C) and the presence of a reducing agent, rapidly form Fe-Cr or Fe-Cr-C based alloy particles, with a final metal recovery rate exceeding 95%. - A reaction model was established to further reveal the mechanisms of sulfur, iron, and chromium stabilization and migration, providing a theoretical basis for the harmless treatment of these two materials. - The generated alloy can be used as an additive in stainless steel production, while the harmless slag can be used for the preparation of cement-based auxiliary materials. In summary, this study proposes an innovative treatment method that not only effectively handles the industrial wastes SSPS and AOD slag but also recovers valuable metal resources from them, thereby reducing the negative impact on the environment.