Abstract:Utilising cooling stimulation as a thermal excitation means has demonstrated profound capabilities of detecting sub-surface metal loss using thermography. Previously, a prototype mechanism was introduced which accommodates a thermal camera and cooling source and operates in a reciprocating motion scanning the test piece while cold stimulation is in operation. Immediately after that, the camera registers the thermal evolution. However, thermal reflections, non-uniform stimulation and lateral heat diffusions will remain as undesirable phenomena preventing the effective observation of sub-surface defects. This becomes more challenging when there is no prior knowledge of the non-defective area in order to effectively distinguish between defective and non-defective areas. In this work, the previously automated acquisition and processing pipeline is re-designed and optimised for two purposes: 1-Through the previous work, the mentioned pipeline was used to analyse a specific area of the test piece surface in order to reconstruct the reference area and identify defects. In order to expand the application of this device over the entire test area, regardless of its extension, the pipeline is improved in which the final surface image is reconstructed by taking into account multiple segments of the test surface. The previously introduced pre-processing method of Dynamic Reference Reconstruction (DRR) is enhanced by using a more rigorous thresholding procedure. Principal Component Analysis (PCA) is then used in order for feature (DRR images) reduction. 2-The results of PCA on multiple segment images of the test surface revealed different ranges of intensities across each segment image. This potentially could cause mistaken interpretation of the defective and non-defective areas. An automated segmentation method based on Gaussian Mixture Model (GMM) is used to assist the expert user in more effective detection of the defective areas when the non-defective areas are uniformly characterised as background. The final results of GMM have shown not only the capability of accurately detecting subsurface metal loss as low as 37.5% but also the successful detection of defects that were either unidentifiable or invisible in either the original thermal images or their PCA transformed results.

A Three-Dimensional Damaged Region Contour Extraction Approach for Cold Spray Repair

Rapid Digital Repair Technique for Auto Panel Dies

Research on rapid repairing techniques for auto panel dies

BROKEN AREA MODELING FOR REPAIR AUTOMATION

A novel spiral trajectory for damage component recovery with cold spray

Deposit shape control for local repair and welding by cold spray

Worn area modeling for automating the repair of turbine blades

Research on Point Cloud Repair Based on Multi-parameter Extraction in Digital Power Plant

Online Quality Monitoring in Material Extrusion Additive Manufacturing Processes Based on Laser Scanning Technology

Nondestructive Characterization of Multiscale Defects in an Aluminum Alloy After Cold Spray Repair

Research Progress on Numerical Simulation of the Deposition and Deformation Behavior of Cold Spray Particles

Research on point cloud hole filling and 3D reconstruction in reflective area

Method and Application of Spraying Developer Defect Detection in Three-Dimensional Optical Scanning Measurement Process Based on YOLO v7

Hole Surface Repairing for Laser Triangular Mesh Point Cloud

Microstructural Feature Extraction by a Convolutional Neural Network for Cold Spray of Aluminum Alloys

Three-dimensional contour detection method based on fusion of machine vision and laser radar

A region-growing approach for automatic outcrop fracture extraction from a three-dimensional point cloud

Quantitative evaluation for small surface damage based on iterative difference and triangulation of 3D point cloud

How to Unleash the Remarkable Potential of Cold Spray: A Perspective

Automatic three-dimensional reconstruction of subsurface defects by segmenting ultrasonic point cloud

An Automated Pipeline for Dynamic Detection of Sub-Surface Metal Loss Defects across Cold Thermography Images