Abstract:The unsteady flow at small flow rates is always the most important of typical unsteady phenomena in centrifugal compressors, since it is closely related to the operating safety and efficiency. To study the mechanism of stall and surge generation, an experimental research on an industrial centrifugal compressor with variable vaned diffuser is carried out to study the unsteady flow structure from design point to surge. A multi-phase dynamic pressure measurement is conducted, based on 23 dynamic pressure sensors mounted on the shroud side casing surface of the compressor. The sensors are circumferentially distributed in a non-uniform manner at seven different radial positions, including the impeller region, the vaneless region and the diffuser throat region. Real-time data is recorded during the whole valve-adjusting process. The characteristics of pressure fields at some specific operating conditions are focused on, especially the pre-stall, stall precursor, stall and surge conditions. According to the multiphase data association, the originating position of the stall precursor can be determined. The features of the unsteady flow structure are also obtained, such as the surge pattern and the propagation direction of stall cells. In addition, when the diffuser vane setting angle (OGV) is turned up, the core factors to trigger total instability will change. In order to visually show how the tip leakage and separation vortex in the impeller gradually affect the flow structure in the vaned diffuser region and even the whole machine, numerical simulation and dynamic mode decomposition (DMD) method are used to study the flow mechanisms. The numerical simulation result is well matched with the experimental result. With the help of the DMD method, a few low-frequency tip leakage vortex structures are extracted from the unsteady numerical result over a period of time, which correlate with the experimental result. Meanwhile, on this issue, the feasibility of dynamic experimental analysis combined with multi-channel numerical simulation analysis is verified and discussed. Through the two analytic methods, a detailed understanding of the unsteady flow structure in the centrifugal compressor with variable vaned diffuser is obtained.

Direct numerical simulation and mode analysis of turbulent transition flow in a compressor blade channel

Numerical Investigation into the Mechanism Regarding the Inception and Evolution of Flow Unsteadiness Induced by the Tip Leakage Flow in a Transonic Compressor

Numerical Investigation into Unsteady Flow and Its Associated Flow Mechanism in a Transonic Compressor Rotor at Near Stall Conditions

Direct Numerical Simulation of Boundary Layer Transition Induced by Roughness Element in a Low Reynolds Number Compressor Blade

Analysis of unsteady flow characteristics and modal behavior of a compressor cascade using Large Eddy Simulation

Dynamic Mode Decomposition of the Unsteady Flow in a Vaneless Diffuser

Numerical Investigations into the Origin of Tip Unsteadiness in a Transonic Compressor

Direct Numerical Simulation of Vortex Structures During the Late Stage of the Transition Process in a Compressible Mixing Layer

Numerical Study on Separation Flows of a Compressor Transition Duct

EFFECT OF WAKE NEGATIVE JET FLOW ON THE BOUNDARY LAYER TRANSITION OF COMPRESSOR CASCADE

Investigation of flow unsteadiness in a highly-loaded compressor cascade using a dynamic mode decomposition method

Investigation of Vortex Structures Near Tip Region in a Transonic Axial Flow Compressor Rotor

Direct Numericalsimulation of Separated-Flow Transition in Low-Pressure Turbine

Large-Eddy Simulation of Transitional Flows on a Compressor Blade

Experimental and Numerical Analysis of Unsteady Flow Structure in a Centrifugal Compressor with Variable Vaned Diffuser

Numerical Investigation of Separation-Induced Transition in a Low-Pressure Turbine Cascade in a Low-Disturbance Environment

Investigation on Spatial Evolutions of Two- and Three-Dimensional Modes in a Laminar Separation Bubble over a Low-Pressure Turbine Cascade

Analysis of Unsteady Tip Leakage Flow in an Axial Compressor Rotor Using Dynamic Mode Decomposition

Effects of incoming flow conditions on the boundary-layer flow on the blade surface of compressor

Experimental and Numerical Investigation of Non-synchronous Blade Vibration Excitation in a Transonic Axial Compressor

Separation-induced transition on a T106A blade under low and elevated free stream turbulence