Abstract:In pursuit of carbon neutrality, the adoption of zero-carbon fuels in internal combustion engines offers a path to zero carbon emissions. Among such fuels, ammonia (NH 3 ) stands out as an effective hydrogen energy carrier with a higher energy density and a more advanced production-storage-transportation lifecycle than hydrogen (H 2 ) fuel, making it a superior alternative. Nevertheless, achieving high combustion efficiencies in engine cylinders requires the use of fuels with fast flame speeds, since the time scales of the combustion event are practically milliseconds. The inherent flame speed of NH 3 falls short, typically necessitating augmentation with H 2 . Yet, the in-situ generation of H 2 from NH 3 remains constrained, rendering the flame speed of NH 3 less competitive against traditional fuels like gasoline and natural gas. To address the dual challenges of slow flame speed of NH 3 and the difficulty of generating large amounts of H 2 from NH 3 onboard, this study evaluates an alternative method of accelerating the ammonia combustion in the engine combustion chamber through the use of multiple spark plugs, which is limited discussed in existing research. Numerical simulations performed in this study show that the application of the multi-spark strategy increases the mass burn rate, advances the combustion phasing, shortens the combustion duration, increases the engine power output, improves the fuel economy, and reduces the unburned ammonia emissions, all of which indicate that rapid combustion of pure ammonia is achieved in the combustion chamber. Moreover, the use of multiple spark points does not lead to a marked increase in nitrogen oxides emissions, thereby ensuring no added stress on exhaust aftertreatment systems. In addition, pure ammonia combustion appears to be very well adapted to this strategy, as evidenced by the avoidance of excessive cylinder pressures and pressure rise rates—a challenge faced by conventional spark ignition engines, given ammonia notably slower flame speed relative to conventional petroleum-based fuels. Overall, all these findings strongly support that the multi-spark ignition system presents a compelling direction for future zero-carbon ammonia engines. However, it is crucial to address design challenges to ensure that the engine head layout provides sufficient cooling, structural robustness, optimal breathing efficiency, and reliable multi-ignition events within the confined space.

Evaluation of the use of ammonia/hydrogen blends in turbocharged gas engines

Combustion of Premixed Ammonia and Air Initiated by Spark- Ignited Micro-gasoline-jet in a Constant Volume Combustible Vessel

Computational Analysis of Ammonia-Hydrogen Blends in Homogeneous Charge Compression Ignition Mode of Engine Operation

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

Impact of ammonia addition on knock resistance and combustion performance in a gasoline engine with high compression ratio

Potential of hydrogen addition to natural gas or ammonia as a solution towards low- or zero-carbon fuel for the supply of a small turbocharged SI engine

Evaluation of ammonia-gasoline co-combustion in a modern spark ignition research engine

Stage-wise Kinetic Analysis of Ammonia Addition Effects on Two-Stage Ignition in Dimethyl Ether

Investigation of the Effect of Ammonia Addition on the Two-Stage Ignition Process of Dimethyl Ether Based on Chemical Kinetic Analysis

An Evaluation of the Conversion of Gasoline and Natural Gas Spark Ignition Engines to Ammonia/Hydrogen Operation From the Perspective of Laminar Flame Speed

Combustion and Emission Characteristics of a Spark Ignition Engine Fueled with Ammonia/gasoline and Pure Ammonia

Numerical study on the use of ammonia/hydrogen fuel blends for automotive spark-ignition engines

Assessing Hydrogen-Ammonia Ratios to Achieve Rapid Kernel Inception in Spark Ignition Engines

Evaluation of Ammonia Co-fuelling in Modern Four Stroke Engines

Lean ammonia-fueled engine operation enabled by hydrogen-assisted turbulent jet ignition

Preliminary assessment of the potential for rapid combustion of pure ammonia in engine cylinders using the multiple spark ignition strategy

Effects of Hydrogen Addition on the Performance of a Pilot-Ignition Direct-Injection Natural Gas Engine: A Numerical Study

Performance of ammonia fuel in a spark assisted compression Ignition engine

Combustion and emission characteristics of a gasoline/ammonia fueled SI engine and chemical kinetic analysis of NOx emissions

Experimental study of the performance of a SI-engine fueled with hydrogen-natural gas mixtures

Effect of ammonia/hydrogen blending and injection modes on combustion emission and performance of marine engine