Abstract:In this study, the performance of standalone ultraviolet (UV) photolysis and UV-based advanced oxidation processes (AOPs), namely, UV/hydrogen peroxide, UV/chlorine, UV/persulphate, and UV/permonosulphate, were investigated for the degradation of 31 trace organic contaminants (TrOCs). Under the tested conditions, standalone UV photolysis did not achieve effective removal of TrOCs. To improve the degradation efficiency of UV photolysis, four different oxidants were added individually to the test solution. The effect of these oxidants in the absence of UV irradiation was also explored and only chlorine showed promising degradation of some contaminants. During the chlorination of 31 investigated TrOCs, only six demonstrated greater than 50% degradation. The combined UV-based AOPs demonstrated much improved degradation (ranging from 65 to 100%) depending on TrOC-structure and oxidant concentration. The UV/hydrogen peroxide process showed similar degradation of TrOCs, irrespective of the functional groups ( i.e ., electron withdrawing groups, EWGs and electron donating groups, EDGs) present in their structures. Conversely, the UV/sulphate and UV/chlorine based processes achieved better degradation of the TrOCs with EDGs in their structures. TrOCs degradation improved up to 40% when oxidants concentrations were increased from 0.1 to 1 mM, and further increasing the concentration to 2 mM did not improve degradation. Toxicity evaluation using bioluminescence test (BLT assay) demonstrated that except for UV/hydrogen peroxide, all UV-based AOPs increased the toxicity of the treated effluent, indicating generation of toxic by-products. This study elucidates the performance of four different UV-based AOPs for the removal of commonly detected diverse TrOCs for the first time.

Evaluating the photocatalytic degradation efficacy of 2,4,6-trichlorophenol: performance evaluation and influencing factors

Phenol Degradation by TiO<inf>2</inf> Photocatalytic Technology

Phenol degradation by TiO2 photocatalytic technology

Synergistic potency of ultrasound and solar energy towards oxidation of 2,4-dichlorophenol: a chemometrics approach

Degradation of Phenol via an Advanced Oxidation Process (AOP) with Immobilized Commercial Titanium Dioxide (TiO2) Photocatalysts

Phenol Degradation by TiO2 Photocatalysts Combined with Different Pulsed Discharge Systems.

Photocatalytic Degradation of 2,4-Dichlorophenol by TiO2 Intercalated Talc Nanocomposite

Detoxification of photo-catalytically treated 2-chlorophenol: optimization through response surface methodology

Solar heterogeneous photocatalytic degradation of phenol on TiO2/quartz and TiO2/calcite: a statistical and kinetic approach on comparative efficiencies towards a TiO2/glass system

PHOTOCATALYTIC DEGRADATION OF PHENOL AND CHLOROPHENOLS ON Pt/TiO2-COATED PHOTOREACTOR

Non-thermal Plasma-Induced Photocatalytic Degradation of 4-Chlorophenol in Water.

Synthesis of TiO2/g-C3N4 Hybrid Photocatalyst and its Application for Degradation of Chlorophenol as Organic Water Pollutant

PHOTOCATALYTIC DEGRADATION OF PHENOL AND CHLORINATED PHENOLS USING NANOMETER TiO2 THIN FILMS

Degradation of pesticides chlorpyrifos, cypermethrin and chlorothalonil in aqueous solution by TiO2 photocatalysis

Influence of UV-A Light Modulation on Phenol Mineralization by TiO2 Photocatalytic Process Coadjuvated with H2O2

Elucidating the performance of UV-based photochemical processes for the removal of trace organic contaminants: Degradation and toxicity evaluation

Study of application of titania catalysts on solar photocatalysis: Influence of type of pollutants and water matrices

Titanium dioxide-mediated photocatalysed degradation of few selected organic pollutants in aqueous suspensions

Photocatalytic Degradation of Phenanthrene by Graphite Oxide-Tio2-sr (oh)(2)/srco3 Nanocomposite under Solar Irradiation: Effects of Water Quality Parameters and Predictive Modeling

Photolytic and Photocatalytic Degradation of Phenols in Aqueous Solution

Phenol contaminated water treatment by photocatalytic degradation on electrospun Ag/TiO2 nanofibers: Optimization by the response surface method