Abstract:Due to the special design of slant bed CNC lathes, the temperature of the X-axis feed motor will significantly increase after power-up, even if there is no feed motion. Based on this phenomenon, we redesigned the experiments that are used to study the effects of ambient temperature variations, the heat generated in the spindle, and the heat generated in the X-axis feed system on the thermal errors. The measurement scheme was improved to identify the effects of the tilt of the spindle axis and turret. The heat generated in the X-axis feed system was divided into two categories: the heat unrelated and related to the feed motion, based on their sources, and their effects were studied separately in different experiments. Since the relationship between the temperature distribution and thermal errors was relatively explicit in each newly designed experiment, the effects of each major factor could be accurately and reasonably described by the established thermal error models. According to our analysis, the conclusions and models obtained in the newly designed experiments can provide a reliable reference for thermal error modeling under complicated operating conditions. Based on these findings, a new experiment-based multi-objective modeling method implemented with the multi-objective particle swarm optimization (MOPSO) algorithm was proposed. In addition to the prediction accuracy, the reasonability of the model coefficients, which was quantified by the difference between the candidate and reference values, was identified as an important optimization objective. Compared with traditional methods, the models established with the proposed method expressed the relationship between the temperature and thermal error more reasonably, and it could successfully maintain its accuracy at different spindle speeds. According to the experimental verification, the residual errors were at least 55.28% lower when predicting the thermal error in the X-direction with the proposed method.

Thermal error reduction in CNC lathe with epoxy granite bed using thermo-structural optimization

Thermal Investigations on a CNC Lathe Fitted with a Dynamically Enhanced Steel-Reinforced Epoxy Granite Bed

Robust Modeling for Thermal Error of Spindle of Slant Bed Lathe Based on Error Decomposition

Thermal Error Reduction Based on Thermodynamics Structure Optimization Method for an Ultra-Precision Machine Tool

Static and dynamic behavior of steel-reinforced epoxy granite CNC lathe bed using finite element analysis

An application of real-time error compensation on an NC twin-spindle lathe

Analysis of Present Research about Thermal Error Identification Model of NC Lathe

Thermal error modeling and forecasting for NC machine tools based on intelligent technology

An Experiment-Based Multi-Objective Modeling Method for Thermal Errors of Slant Bed CNC Lathes

The Modeling Method on Thermal Expansion of CNC Lathe Headstock in Vertical Direction Based on MOGA

Feedback Control–based Active Cooling with Pre-Estimated Reliability for Stabilizing the Thermal Error of a Precision Mechanical Spindle

Thermal Characteristic Optimization of a CNC Forming Gear Grinding Machine

Thermal error optimization modeling and real-time compensation on a CNC turning center

Thermal Error Modelling and Compensation of CNC Lathe Feed System Based on Positioning Error Measurement and Decoupling

Thermal Error Modeling and Compensation of a Heavy Gantry-Type Machine Tool and Its Verification in Machining

Thermal behavior analysis and thermal error compensation for motorized spindle of machine tools

Dynamic temperature gradient and unfalsified control approach for machine tool thermal error compensation

Modeling Approach of Regression Orthogonal Experiment Design for Thermal Error Compensation of CNC Turning Center

Spindle Thermal Error Optimization Modeling of A Five-Axis Machine Tool

Application of GRAM and AFSACA-BPN to thermal error optimization modeling of CNC machine tools

Comprehensive thermal error modeling for NC lathe in engineering application