Abstract:The modular multilevel converter presents itself as a promising topology in medium voltage and high power applications. This paper presents a multilevel modulation scheme using two frequency components in the modulating wave to reduce the harmonic content in the medium frequency converter output voltage. Experimental results present the operation of the converter and the characteristics proposed by the modulation scheme, where the waveform of the sinusoidal output voltage with lower harmonic content. Summary The modular multilevel converter presents itself as a promising topology in medium voltage and high power applications due to its modular characteristic and flexibility in applications where DC‐AC and AC‐DC power conversion are required. Despite this, applications with electric traction present this topology in the AC‐AC conversion due to the converter at the input of a solid‐state transformer and the power system's single‐phase characteristic at the converter's input. One of the main problems characteristic of this topology is the harmonic content present in the medium frequency converter output voltage due to its square waveform. Thus, the harmonic content in this voltage is high, increasing the losses and volume in the core of the medium frequency transformer. This paper presents a multilevel modulation scheme using two frequency components in the modulating wave to reduce the harmonic content in the medium frequency converter output voltage. With the converter branch inductors, it is possible to verify the filtering of the output voltage and thus reduce the harmonic content of this voltage. A low power and voltage (1 kW/500 V) of the AC‐AC modular multilevel converter is implemented, and simulation results show some operating characteristics of the modulation scheme. Experimental results at low power and voltage (0.6 kW/208 V–125 V/1.2 kHz) present the operation of the converter and the characteristics proposed by the modulation scheme, where it is possible to verify the waveform of the sinusoidal output voltage with lower harmonic content.

A Series-Arm Modular Multilevel DC/DC Converter with Variable Duty Cycle Quasi-Square-Wave Modulation for ZVS Operation

Bidirectional Modular Multilevel Resonant DC Converter for MVDC and LVDC Application

An LLC -DAB Bidirectional DCX Converter with Wide Load Range ZVS and Reduced Switch Count

Design and Implementation of an Accurately Regulated Multiple Output ZVS DC–DC Converter

A Five-level AC/DC Converter for MV Solid-State Transformer

A Quasi-Square-Wave Modular Multilevel Resonant DC/DC Converter With ZCS and Current-Shaping Capacity for High Step-Ratio Application

Bidirectional Modular Multilevel Resonant DC-DC Converter for Medium Voltage Power Conversion

A Hybrid Modular Multilevel Converter Topology with an Improved Nearest Level Modulation Method

A Multilevel DC-Link Converter for VSC-HVDC Application

Quasi-Square-Wave Modulation of Modular Multilevel High-Frequency DC Converter for Medium-Voltage DC Distribution Application

High Frequency Multicell Cascaded Quasi-Square-Wave Boost Converter

A Modular Multilevel DC-DC Converter with Self Voltage Balancing and Soft Switching

Introduction, Modeling and Simulation of Modular Multilevel Converter

A Bidirectional Modular Multilevel Resonant DC-DC Converter for Wide Voltage Range Medium Voltage Power Conversion

A Novel Hybrid DC Transformer Combining Modular Multilevel Converter Structure and Series-Connected Semiconductor Switches

A Modular Multilevel Converter with Boosting, Self-Balancing, and Scaling Capabilities for High- Voltage Transformerless PV Applications

A Step-Up Nonisolated Modular Multilevel DC–DC Converter With Self-Voltage Balancing and Soft Switching

A Novel Modulation Scheme and a DC-Link Voltage Balancing Control Strategy for T-Type H-Bridge Cascaded Multilevel Converters

Study, analysis, and development of a small‐scale AC‐AC modular multilevel converter for solid‐state transformer applications

A Prototype of Modular Multilevel Converters