Abstract:Introduction Gas sensors have been received extensive attentions due to the critical roles of various gases in industry, environmental monitoring and agriculture. A variety of gas sensing approaches has been developed such as gas chromatography, optical sensing, metal oxide semiconductor-based sensing and electrochemical sensing. Compared to other methods, electrochemical method features high sensitivity, low detection limit, good reproducibility and wide detection range, which has been explored for applications in real world. As a typical electrochemical device, screen printed electrodes (SPEs) can be easily and massively fabricated with good integration and low cost. Also, the easily tunable ink composition is another intriguing feature for specific applications. However, screen printed carbon electrodes (SPCEs) have inferior electrochemical catalysis to noble metal-based sensors despite of its low cost. To further improve the electrochemical performance of SPCEs for gas sensing, nanomaterials are considered as a promising alternative due to its high catalysis, fast electron transfer and large active surface area. MXene is a new class of two-dimensional materials such as Ti3C2X, in which X indicates oxygen- and fluorine-containing functional groups. MXene demonstrates outstanding electrochemical features with excellent catalytic ability. However, MXene materials can easily induce spontaneous oxidation reaction with oxygen and water due to its inherent feature. Therefore, nanocomposites with MXene and metal nanostructures are introduced to improve the stability and further enhance the catalytic performance. In this paper, a screen-printed carbon electrode (SPCE) with self-assembled AuNPs@MXene modification was developed for high sensitive electrochemical gas detection. The sensor performance was compared and evaluated with different concentrations of oxygen using cyclic voltammetry and chronoamperometry. Experimental Compressed air (21% O2) and nitrogen were used as the target gas and balancing gas, respectively. Room temperature ionic liquids 1-butyl-1-methylpyrrolidinium bis-(trifluoromethylsulfonyl)-imide ([C4mpy][NTf2], Aladdin, China) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6], Acros Organics, USA) were used as the supporting electrolyte by drop-casting on the sensor surface. Ti3C2X powders were synthesized by using HF to etch Ti3AlC2 particles as reported in the literature [1]. Gold nanoparticles were synthesized by using trisodium citrate and chloroauric acid as reported in the literature [2]. All chemicals were used as received without further purification. Screen-printed carbon electrodes were purchased from Zensor R&D Inc. A gas blender (MCQ100, Italy) was used for gas mixing, and the total gas flow rate was set constant as 200 standard cubic centimeter per minute (SCCM).An electrochemical analyzer CHI 1030 was used for electrochemical tests using cyclic voltammetry (CV) and constant potential chronoamperometry. Results The bare SPCE was first tested in 21% O2 and nitrogen using cyclic voltammetry, and a pair of reduction peak and oxidation peak can be apparently observed, validating the catalytic ability of carbon-based sensors for gas sensing. Two different RTILs were tested using as the electrolyte, and the results indicate that the sensor using [C4mpy][NTf2] presents higher current response and sensitivity. The sensing performance of bare SPCE, MXene modified SPCE and AuNPs@MXene modified SPCE was compared using CV and chronoamperometry, and AuNPs@MXene modified SPCE exhibits the highest current response and sensitivity due to the synergetic catalytic effect of MXene and AuNPs. The AuNPs@MXene modified SPCE was tested with different oxygen concentration, validating that the sensor has very high sensitivity, wide linear range, low detection limit and good reproducibility. Thus, the sensor can be a promising device for practical gas sensing applications in the real world. References [1] L. Lorencova, T. Bertok, E. Dosekova, A. Holazova, D. Paprckova, A. Vikartovska, V. Sasinkova, J. Filip, P. Kasak, M. Jerigova, Electrochemical performance of Ti3C2Tx MXene in aqueous media: towards ultrasensitive H2O2 sensing, Electrochimica acta, 235(2017) 471-9. [2] Z. Mei, Y. Deng, H. Chu, F. Xue, Y. Zhong, J. Wu, H. Yang, Z. Wang, L. Zheng, W. Chen, Immunochromatographic lateral flow strip for on-site detection of bisphenol A, Microchimica Acta, 180(2013) 279-85. Figure 1

Self-Assembly 3D Porous Crumpled MXene Spheres as Efficient Gas and Pressure Sensing Material for Transient All-MXene Sensors

MXene@CTAB@CMF Three-Dimensional Elastic Base for Piezoresistive Pressure Sensors Realized by Electrostatic Self-Assembly

Screen-Printed Carbon Electrode with Self-Assembled Aunps@Mxene for High Sensitive Electrochemical Gas Detection

Onion-inspired MXene/chitosan-quercetin Multilayers: Enhanced Response to H2O Molecules for Wearable Human Physiological Monitoring

3D Porous MXene Aerogel through Gas Foaming for Multifunctional Pressure Sensor

Ultrasensitive flexible NO2 gas sensors via multilayer porous polymer film

Synergistic Etching and Hydrogen Bonding-Induced Self-Assembly of MXene/MOF Hybrid Aerogel for Flexible Room-Temperature Gas Sensing

Anti-Oxidized Self-Assembly of Multilayered F-Mene/MXene/TPU Composite with Improved Environmental Stability and Pressure Sensing Performances

Fully Transient 3D Origami Paper-Based Ammonia Gas Sensor Obtained by Facile MXene Spray Coating

Breathable Ti 3 C 2 T x MXene/Protein Nanocomposites for Ultrasensitive Medical Pressure Sensor with Degradability in Solvents

Flexible and Highly‐sensitive Pressure Sensor Based on Controllably Oxidized MXene

MXene Functionalized, Highly Breathable and Sensitive Pressure Sensors with Multi‐Layered Porous Structure

Hollow MXene Sphere/Reduced Graphene Aerogel Composites for Piezoresistive Sensor with Ultra‐High Sensitivity

3D Crinkled Alk‐Ti 3 C 2 MXene Based Flexible Piezoresistive Sensors with Ultra‐High Sensitivity and Ultra‐Wide Pressure Range

Fully Flexible MXene-based Gas Sensor on Paper for Highly Sensitive Room-Temperature Nitrogen Dioxide Detection.

Versatile MXene Integrated Assembly for Piezoresistive Micro‐force Sensing

Self-assembly of metal-organic framework (UIO-66-NO2) and MXene for wearable and high-performance flexible pressure sensor

Dual-Stage Surficial Microstructure to Enhance the Sensitivity of MXene Pressure Sensors for Human Physiological Signal Acquisition

Molecular ammonia sensing of PEDOT:PSS/nitrogen doped MXene Ti 3 C 2 T x composite film at room temperature

MXene/WO 3 Sensor Array with Improved SNN Algorithm for Accurate Identification of Toxic Gases

Multifunctional Ti3C2Tx MXene/Poly(Styrene‐Methacrylic Acid)@Polypyrrole Nanospheres/Thermoplastic Polyurethane Electrospinning Membrane for High Sensitivity Pressure Sensing and Pressure‐Electrothermal