Abstract:Developing transition metal-based electrode materials with high charge storage ability and excellent cycle life is a substantial challenge for supercapacitor applications. This report demonstrates an improved specific capacitance and excellent cycling stability for a Ni/Co-hydroxide-(oxy)hydroxide electrode material obtained from the electrochemical reconstruction of a Ni/Co-pyrophosphate precursor. Herein, we have prepared a series of nickel/cobalt pyrophosphate (Ni x Co 100− x 600) ( x = 90, 80, 70, 60, 50, 0) materials through a simple co-precipitation method followed by thermal annealing. Upon electrochemical treatment, the developed nickel/cobalt pyrophosphate materials were transformed into porous Ni/Co-hydroxide-(oxy)hydroxides. This is due to the etching of pyrophosphate anions with electrochemical cycling, confirmed by rigorous physical characterization. Among them, Ni-rich electrodes showed higher specific capacitance values due to the dominant intercalation redox behavior (battery-type storage), yet they suffer from poor cycle stability. In contrast, Co-rich electrodes display low specific capacitance and excellent capacitance retention as the charge storage mainly occurs through surface redox processes. Interestingly, the incorporation of an adequate amount of cobalt into the nickel system has dramatically improved the charge storage ability as well as cycling stability owing to the synergistic effect between Ni and Co redox centers and the balanced charge storage phenomenon contributed by both the surface and intercalation redox processes. Especially, the material developed from Ni 60 Co 40 600 has exhibited a maximum specific capacitance of 566 F g −1 at 1 A g −1 current density and achieved an excellent capacitance retention of 84% (∼99% coulombic efficiency) up to 10 000 cycles. Further, the corresponding hybrid device (Ni 60 Co 40 600//AC) has displayed an operational voltage window of 1.6 V and achieved a maximum energy density of 14.9 W h kg −1 at 794.5 W kg −1 power density and could retain ∼86% of its initial capacity even after 25 000 cycles, thereby indicating the suitability of the electrode for practical applications.

Cerium Doped NiO Nanoparticles: A Novel Electrode Material for High Performance Pseudocapacitor Applications

Co3S4 Nanoplate Arrays Decorated with Oxygen-Deficient CeO2 Nanoparticles for Supercapacitor Applications

Construction of Porous NiCo2S4@CeO2 Microspheres Composites for High-Performance Pseudocapacitor Electrode by Morphology Reshaping

Efficient Utilization of Oxygen-Vacancies-enabled NiCo2O4 Electrode for High-Performance Asymmetric Supercapacitor

Unveiling the Dynamic Capacitive Storage Mechanism of Co3O4 @nico2o4 Hybrid Nanoelectrodes for Supercapacitor Applications

High Pseudocapacitive Performance of MnO2 Nanowires on Recyclable Electrodes

Nanotexturing TiO2 over carbon nanotubes for high-energy and high-power density pseudocapacitors in organic electrolytes

Nickel–Cobalt Hydroxide Microspheres Electrodepositioned on Nickel Cobaltite Nanowires Grown on Ni Foam for High-Performance Pseudocapacitors

Hybrid Porous Flower-Like NiO@CeO(2)microspheres with Improved Pseudocapacitiveproperties

Charge storage mechanism and pseudocapacitance performance of NiO and Ce-doped NiO synthesized via modified combustion technique

Hierarchical nickel phosphide/carbon nanofibers for high performance pseudocapacitors

Co 3 O 4 /MnO 2 Core/Shell-Nanostructured Pseudocapacitor Electrode

Construction of Ce-Doped NiCo-LDH@CNT Nanocomposite Electrodes for High-Performance Supercapacitor Application

Efficient Recovery Annealing of the Pseudocapacitive Electrode with a High Loading of Cobalt Oxide Nanoparticles for Hybrid Supercapacitor Applications

Nanostructured Electrodes for High-Performance Pseudocapacitors

High rate capabilities and remarkably cycle-stable flexible pseudocapacitors based on nano-coralloid arrays with sulfide vacancies enhanced Ni−Co−S nanoparticle covering

Novel Sub‐5 nm Layered Niobium Phosphate Nanosheets for High‐Voltage, Cation‐Intercalation Typed Electrochemical Energy Storage in Wearable Pseudocapacitors

Reconfiguring the Electronic Structure of Heteroatom Doped Carbon Supported Bimetallic Oxide@Metal Sulfide Core-Shell Heterostructure via In Situ Nb Incorporation toward Extrinsic Pseudocapacitor

Electrochemical surface reconstruction of nickel cobalt pyrophosphate to Ni/Co-hydroxide-(oxy)hydroxide: an efficient and highly durable battery-type supercapacitor electrode material

Synthesis, phytotoxic, and electrochemical evaluation of mixed Ce-Cr nickelate porous nanorods for environmental and energy storage applications

Interface Metallization Enabled an Ultra-Stable Fe2O3 Hierarchical Anode for Pseudocapacitors.