Abstract:Hard carbon (HC) is considered to be an anode material with great promise for sodium-ion batteries (SIBs), on account of the advantages of high reversible specific capacity and abundant source. Nevertheless, its poor high-rate and long-term cycle performance, which were caused by the unrestricted decomposition of the electrolyte and sustained formation of the solid–electrolyte interface (SEI) film, limit the practical use. Herein, the balance between high mechanical strength and good flexibility of the SEI layer formed in the discharge/charge process was achieved by modifying the surface of the HC anode with a proper amount of AlF3 coating. In this way, the reversible specific capacity increased from 322 to 346 mA h g–1 at 20 mA g–1. Furthermore, the capacity retention at 100 mA g–1 for 100 cycles of the modified sample considerably increased from 47.4 to 76.5%, as well as rate performance was significantly improved from 69 to 135 mA h g–1 at 200 mA g–1. The improvement of performance is mainly attributed to the rational distribution of organic–inorganic phase components in the SEI film (about 43% inorganic phase and 57% organic phase), which ensures the stability of the SEI layer in the continuous discharge/charge process, resulting in a superior performance. Therefore, this work not only provides an effective method to synthesize HC anode with high electrochemical performance in SIBs but also clearly illustrates the mechanism of how the coating affects the composition of the SEI film to improve the performance of materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01497.SEM images of HC particles; PSD diagram; TG curve; XRD pattern and Raman spectrum photograph; infrared spectra; EDS spectrum of the profile and EDS images of the electrode surface after five cycles; CV curves and rate capability diagram under different experimental conditions; and charge–discharge curves and cycle performance diagram at 20 mA g–1 of 3.0 wt % 3 (PDF)This article has not yet been cited by other publications.

Spent Carbon Cathode Used as a Cathode Material for High-Performance Dual-Ion Batteries: High-Value Utilization

Recovery of carbon from spent carbon cathode by alkaline and acid leaching and thermal treatment and exploration of its application in lithium-ion batteries

Upcycling of Spent Carbon Cathode (SCC) into SCC-2600@rGO Facilitates Ultrastable and Fast Lithium Storage

Short-term and High-performance Recycling of Cathode Material from Spent Lithium Ion Batteries

Hierarchical Carbon Shell Compositing Microscale Silicon Skeleton As High-Performance Anodes for Lithium-Ion Batteries

Diffusion coefficient analysis of aluminum electrolysis spent cathode as anode material for lithium-ion battery

A Universal Molten Salt Method for Direct Upcycling of Spent Ni‐rich Cathode Towards Single‐crystalline Li‐rich Cathode

Purification of spent cathode carbon from aluminum electrolysis cells by alkali fusion-acid leaching process

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Harmless recovery and utilization of electrolytic aluminum spent cathode carbon block: A comprehensive review

Converting spent carbon cathode (SCC) into SCC-2600@rGO for superior Li+ storage performance

Aluminum electrolysis derivative spent cathodic carbon for dendrite-free Li metal anode

Separation and recovery of valuable elements from acid leachate of spent carbon cathode by fractional precipitation method

Direct Regeneration of NCM Cathode Material with Aluminum Scraps

Methodological Review of Methods and Technology for Utilization of Spent Carbon Cathode in Aluminum Electrolysis

Recycling of mixed lithium-ion battery cathode materials with spent lead-acid battery electrolyte with the assistance of thermodynamic simulations

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

Recovery of valuable metals and modification of cathode materials from spent lithium-ion batteries

Resource Recovery of Spent Lithium-Ion Battery Cathode Materials by a Supercritical Carbon Dioxide System

Can Aluminum Impurity from Current Collectors Upgrade Spent Li1‐xCoO2 into a High‐Performing Cathode for Lithium‐Ion Batteries?

Solid Electrolyte Interphase Composition Regulation via Coating AlF 3 for a High-Performance Hard Carbon Anode in Sodium-Ion Batteries