Abstract:The adsorption of weighty metal particles from contaminated water sources has garnered significant attention due to its critical role in environmental remediation and ensuring safe drinking water. Heavy metal ions can be removed from water using conventional adsorbents such as activated zeolites; however, these materials have low absorption and slow kinetics. To solve these issues, carbon-based adsorbents that exhibit easy synthesis, high porosity, design ability, and stability have been proposed. In this review, a carbon-based adsorbent, named M-NC, and graphene oxide were created for the particular evacuation of weighty metal particles. To increase the potential for Heavy Metals (HM) immobilization, sulfide-modified biochar was created via a process called synchronous carbon layer epitome. A hypothetical physicochemical and thermodynamic examination of the adsorption of weighty metals Zn 2+ , Cd 2+ , Ni 2+ , Ag 2+ , Pb 2+ and Cu 2+ on carbon-based adsorbents was done with factual material science fundaments. The biochar with large surface areas is utilized to eliminate weighty metal particles, quite possibly the most significant heavy metal pollutants, from aqueous solutions. The limit of the adsorbent for eliminating weighty metal ions was concentrated on utilizing Langmuir adsorption isotherm under ultrasound-helped conditions. The Mesoporous Silica Nanoparticles (MNCs) can be applied to the Langmuir model and pseudo-second-order kinetics. It is possible to use the Langmuir and second-order kinetic equations to accurately explain the adsorption method. Thermodynamic limitations were also envisioned because sorption is exothermic when it happens spontaneously. A homogeneous measurable physical science adsorption typically was utilized to describe and analyze the experimental heavy metal removal isotherms at 30°C and pH 5 utilizing adsorbents produced by pyrolysis of biomasses (broccoli stalks). The experimental results were investigated in terms of Langmuir and pseudo-2nd-order kinetic equations, Freundlich and isotherm models. The outcome of pH, initial heavy metal ion concentration, contact time, and adsorbent dosage regarding the adsorption capacity and removal efficiency of Pb 2+ and Cd 2+ on the hydrogel was examined. This study contributes to the advancement of information in the ground of environmentally friendly heavy metal removal techniques, specifically focusing on the usage of biomass-based adsorbents. These findings have the potential to address the need for effective solutions in water purification and environmental cleanup efforts.

Simple and low-cost production of magnetite/graphene nanocomposites for heavy metal ions adsorption

One-pot Synthesis of Magnetic Graphene Oxide Composites As an Efficient and Recoverable Adsorbent for Cd(II) and Pb(II) Removal from Aqueous Solution

Synthesis of Magnetic Graphene Nanocomposites Decorated with Ionic Liquids for Fast Lead Ion Removal.

In situ polymerization of magnetic graphene oxide-diaminopyridine composite for the effective adsorption of Pb(II) and application in battery industry wastewater treatment

Facile Fabrication of Superparamagnetic Graphene/Polyaniline/Fe3o4 Nanocomposites for Fast Magnetic Separation and Efficient Removal of Dye

Magnetic graphene oxide nanocomposite: One-pot preparation, adsorption performance and mechanism for aqueous Mn(II) and Zn(II)

Rapid Removal and Separation of Iron(ii) and Manganese(ii) from Micropolluted Water Using Magnetic Graphene Oxide.

Judicious fabrication of bifunctionalized graphene oxide/MnFe2O4 magnetic nanohybrids for enhanced removal of Pb(II) from water

Optimizing magnetic functionalization conditions for efficient preparation of magnetic biochar and adsorption of Pb(II) from aqueous solution

Synthesis of biochar-iron oxide magnetic nanocomposite for efficient and rapid removal of Pb(II) heavy metal from water

Facile Preparation of Magnetic Graphene Oxide and Attapulgite Composite Adsorbent for the Adsorption of Ni (II)

One-Step Fabrication of Recyclable Konjac Glucomannan-Based Magnetic Nanoparticles for Highly Efficient Cr(VI) Adsorption

Magnetic graphene-based nanocomposites as highly efficient absorbents for Cr(VI) removal from wastewater

Facile one-step synthesis of biochar supported iron nanoparticles for enhancing Pb(II) scavenging from water: Performance and mechanisms

Magnetic anaerobic granular sludge for sequestration and immobilization of Pb

Adsorption of heavy metal ions by carbon-based adsorbent using magnetic nitrogen-doped carbon and graphene oxide

A Graphene-Based Porous Composite Hydrogel for Efficient Heavy Metal Ions Removal from Wastewater

A magnetic macroporous α-Fe2O3/Mn2O3 nanocomposite as an efficient adsorbent for simple and rapid removal of Pb(II) from wastewater and electronic waste leachate

Removal performance and mechanism of Fe3O4/graphene oxide as an efficient and recyclable adsorbent toward aqueous Hg(II)

Synthesis of MnFe2O4@Mn-Co oxide core-shell nanoparticles and their excellent performance for heavy metal removal.

Adsorption of MB and Pb(II) before and after magnetic modification: Performance and mechanism