Removal of sulfonated azo Reactive Red 195 textile dye from liquid phase using surface-modified lychee (Litchi chinensis) peels with quaternary ammonium groups: Adsorption performance, regeneration, and mechanism
Venkata Subbaiah Munagapati,Hsin-Yu Wen,Anjani R.K. Gollakota,Jet-Chau Wen,Kun-Yi Andrew Lin,Chi-Min Shu,Guda Mallikarjuna Reddy,Grigory V. Zyryanov,Jhy-Horng Wen,Zhong Tian
DOI: https://doi.org/10.1016/j.molliq.2022.120657
IF: 6
2022-12-15
Journal of Molecular Liquids
Abstract:In the present work, chemically modified lychee peels were synthesized using glycidyltrimethylammonium chloride (GTMAC) and used to remove Reactive Red 195 (RR 195) from an aquatic environment. Lychee peel powder (LPP), GTMAC-modified LPP (G-LPP), and RR-195/G-LPP were characterized by BET/BJH, FTIR, pHPZC, XRD, and FE-SEM/EDX analyses. Adsorption tests were performed in batch mode, and various operational variables like initial dye concentration (25–250 mg/L), G-LPP mass (10–80 mg/30 mL), stirring speed (0–400 rpm), solution pH (1.0–10.0), contact time (0–480 min), and temperature (298–328 K) were studied to optimize the process. The solution pH strongly affects RR 195 removal efficiency. The maximal dye removal was 94.5%, achieved at pH 4.0. The non-linear assessment of isotherm and kinetics showed that the sorption system was fitted well by the Langmuir model (R2 > 0.9899) and pseudo-first-order kinetic model (R2 > 0.9918). The Langmuir maximum monolayer sorption capacities, qmax, at temperatures of 298, 308, 318, and 328 K are 144.9, 137.7, 130.1, and 124.2 mg/g, respectively, thus suggesting favorable adsorption at low temperatures. The Ea (activation energy) was computed to be 16.3 kJ/mol, which indicated that the adsorption behavior was mainly attributed to physisorption. The thermodynamic variables ΔHo (−46.6 kJ/mol), ΔSo (−133 J/mol K), and ΔGo (−6.8693 ∼ −2.9777) revealed that the sorption process was exothermic, feasible, and spontaneous. The binding of RR 195 dye onto the G-LPP surface was through hydrogen bonding and electrostatic interactions. Desorption efficiency follows the order NaOH (91.2%) > NaCl (69.6%) > HCl (65.2%) > methanol (58.4%) > H2SO4 (48.1%) > acetone (45.5%) > ethanol (39.2%) > HNO3 (31.6%). After five consecutive cycles of regeneration and reusability of G-LPP adsorption performance, the adsorption efficiency was better than 77.3%. The results show that G-LPP is a promising adsorbent for removing RR 195 dye from an aqueous solution.
chemistry, physical,physics, atomic, molecular & chemical