Abstract:Na4PTC possesses a suitable redox potential and exhibits minimal polarization even at high rate, making it a safe anode material. However, its poor electrical conductivity limits its further application. By introducing Bi with a similar redox potential to prepare composite materials, the need for conductive carbon is greatly reduced and the specific capacity of the composite electrodes is also increased. Meanwhile, ultrahigh electrode loading is achieved. Sodium‐ion batteries (SIBs), based on hard carbon anodes and Na+‐intercalation compound cathodes, have gained significant attention. Nonetheless, hard carbon anodes involve the storage of Na+ at a low potential, typically below 0.1 V (vs Na/Na+), which increases the risk of dendritic Na growth on the anode surface during overcharging. Herein, a safe organic/inorganic composite anode containing tetrasodium 3,4,9,10‐perylenetetracarboxylate (Na4PTC) and Metallic bismuth (Bi) with a weight ratio of 7:2, which exhibits an average potential of 0.7 V (vs Na+/Na) and a capacity of 150 mAh g−1 is proposed. The electrode reaction involves a reversible coordination reaction within the organic host and alloying reactions within the metallic Bi component. Importantly, the organic component efficiently buffers the volume changes in Bi during the alloying reaction, while the metallic Bi enhances the electronic conductivity of the organic material. As a result, this composite anode shows high cycle stability and rate performance, even under high mass loadings ranging from 10 to 50 mg cm−2. Furthermore, it is demonstrated that the Na‐ion full cell, consisting of the composite anode and the Na3V2O2(PO4)2F cathode, exhibits minimal capacity degradation over 100 cycles while maintaining a high areal capacity of 1.1 mA cm−2.

Preparation of disodium terephthalate/multi-walled carbon nanotube composite as an anode material for sodium-ion batteries: Performance and mechanism

Disodium terephthalate/multiwall-carbon nanotube nanocomposite as advanced anode material for Li-ion batteries

Ultra-strong Capillarity of Bioinspired Micro/nanotunnels in Organic Cathodes Enabled High-Performance All-Organic Sodium-Ion Full Batteries

Enhanced low-temperature sodium storage kinetics in a NaTi2(PO4)3@C nanocomposite

Lamellar sodium titanium silicate assembled by nanostrips decorated with N-rich 3D carbon for sodium dual-ion batteries

ZIF-8 derived nitrogen-doped carbon composites boost the rate performance of organic cathodes for sodium ion batteries

Research Advances of Carbon-based Anode Materials for Sodium-Ion Batteries

Ultra-Small Tio2 Nanoparticles Embedded In Carbon Nanosheets For High-Performance Sodium Storage

A Low Redox Potential and Long Life Organic Anode Material for Sodium-Ion Batteries

Novel covalent organic framework/carbon nanotube composites with multiple redox-active sites for high-performance Na storage

A Safe Organic/Inorganic Composite Anode for Sodium‐Ion Batteries

Facile synthesis of WS2/Ni3S2 encapsulated in N-doped carbon hybrid electrode with high rate performance as anode for sodium-ion batteries

Long-aspect-ratio N-rich carbon nanotubes as anode material for sodium and lithium ion batteries

High-capacity and cycling-stable anode for sodium ion batteries constructed from SnS2/MWCNTs nanocomposites

N-doped Sb2SnO5@C as advanced anode material for sodium-ion batteries

Fabrication of an Anode Composed of a N, S Co-Doped Carbon Nanotube Hollow Architecture with CoS2 Confined Within: Toward Li and Na Storage

Hierarchical CoSe2/TiN/nitrogen-doped Carbon Nanofibers Wrapped with Carbon Nanotubes: A Binder-Free Anode for Enhanced Sodium-Ion Storage

Nasicon-Structured Nati2(Po4)(3)@C Nanocomposite As the Low Operation-Voltage Anode Material for High-Performance Sodium Ion Batteries

Improved Na Storage Performance with the Involvement of Nitrogen-Doped Conductive Carbon into Ws2 Nanosheets

NiS2 @mwcnts As a Promising Anode Material for Lithium and Sodium-Ion Batteries with Superior Cycling Stability

Carbon Coated Amorphous Bimetallic Sulfide Hollow Nanocubes Towards Advanced Sodium Ion Battery Anode