Abstract:Ultra-high molecular weight polyethylene (PE) fiber with startling mechanical properties and elastic modulus is considered as an ideal reinforcing component for Ultra-High-Strength and High-Ductility Cementitious Composites (UHS-HDCCs). However, the fiber/matrix interface bonding is weakened due to the hydrophobic nature of the PE fiber surface, restricting the perfect expression of the PE fiber inherent characteristics. In this work, a promising technology for the PE fiber surface functionalization using a combination of bio-inspired polydopamine (PDA) and deposited nano-SiO 2 was proposed to enhance the fiber/matrix interfacial bonding in UHS-HDCCs. The results showed that PDA produced a uniform coating layer on the surface of PE fiber, and nano-SiO 2 was successfully grafted to the surface of PE fiber through PDA as a bridge. The coated PDA and nano-SiO 2 layers enhanced the wettability of the PE fiber surface. Nano-SiO 2 layers provided nucleation sites and reaction raw materials for C–S–H gel. Moreover, the SiO 2 -PDA-PE fibers improved the ultimate tensile stress and tensile strain capacity of UHS-HDCCs to be 116.3% and 133.5% respectively, compared to that of UHS-HDCCs incorporating pristine PE fiber. Furthermore, the SiO 2 -PDA-PE fibers effectively reduced the crack width and crack spacing while increasing the number of cracks and energy absorption capacity of UHS-HDCCs when subjected to increasing uniaxial tensile load. The single fiber pullout results showed that both PDA-PE fibers and SiO 2 -PDA-PE fibers enhanced the peak force, chemical bond, frictional bonding stress, slip hardening coefficient, and pullout energy. Obviously, the positive effect of SiO 2 -PDA-PE fibers on the critical parameters of the fiber interface is higher than that of PDA-PE fibers except for the chemical bond. This work explored a novel way to modify the physicochemical performance of PE fiber surface for matching the strain hardening behavior of UHS-HDCCs, which is meant to guide the mix-design optimization of UHS-HDCCs.

3D coating layers of polyhydroquinone di-imidazopyridine (PIPD) fibers to improve their mechanical, interfacial and antimicrobial properties

Improving the Mechanical Properties, UV and Hydrothermal Aging Resistance of PIPD Fiber Using MXene (ti3c2(oh)(2)) Nanosheets

Antibacterial Coatings of Biomedical Surfaces by Polydextran Aldehyde/Polyethylenimine Nanofibers.

Surface Modification of PIPD Fiber Using Nitric Acid Treatment

Grafting Multi-Walled Carbon Nanotubes (mwcnts) into PIPD Fiber for Enhancing Mechanical and Interfacial Performance

Polydopamine Ultrathin Film Growth on Mica via In-Situ Polymerization of Dopamine with Applications for Silver-Based Antimicrobial Coatings

Microstructure, Optical, and Antibacterial Features of PVP/Cu2O Electrospun Nanofibers for Optoelectronics and Biological Purposes

Preparation of Silver Nanoparticle Functionalized Polyamide Fibers with Antimicrobial Activity and Electrical Conductivity

Polydopamine/poly(sulfobetaine Methacrylate) Co-deposition Coatings Triggered by CuSO4/H2O2 on Implants for Improved Surface Hemocompatibility and Antibacterial Activity

Covalent bonding coating of quantum-sized TiO2 with polydopamine on catheter surface for synergistically enhanced antimicrobial and anticoagulant performances

Rapid fabrication of silver nanoparticle/polydopamine functionalized polyester fibers:

Effect of PE fiber coated by polydopamine and nano-SiO 2 on the strain hardening behavior of Ultra-High-Strength and High-Ductility Cementitious Composites

An Investigation of the High Performance of a Novel Type of Benzobisoxazole Fiber Based on 3,3-Diaminobenzidine

Polydopamine-assisted immobilization of hierarchical zinc oxide nanostructures on electrospun nanofibrous membrane for photocatalysis and antimicrobial activity

One-step vapor deposition of fluorinated polycationic coating to fabricate antifouling and anti-infective textile against drug-resistant bacteria and viruses

Electrospinning Fibers Modified with Near Infrared Light‐Excited Copper Nanoparticles for Antibacterial and Bone Regeneration

Effect of polydopamine coating on improving photostability of polyphenylene sulfide fiber

Ecofriendly Preparation of Cellulose Nanocrystal-Coated Polyimide Fiber: Strategy for Improved Wettability

Superhydrophobic, antibacterial, and EMI shielding properties of Ag/PDMS-coated cotton fabrics

A multifunctional coating towards superhydrophobicity, flame retardancy and antibacterial performances

Enhanced antimicrobial property of polyurethane fibers bearing nanoparticles of polyacrylic acid-grafted oleyl amine and zwitterion