Abstract:The continuous operation of coal mine underground reservoirs exposes the coal pillar dams to mining disturbances and prolonged water immersion, resulting in the deterioration of coal pillars' mechanical properties and posing a serious threat to the dam stability. To this end, coal samples from the proposed pillar dam in the 5–2 coal seam of Daliuta Mine in Shendong Mining Area were selected for conducting water absorption tests and triaxial compression tests under conditions of repeated water immersion, in order to study the deterioration of the mechanical properties and acoustic emission damage characteristic of coal samples as well as the mechanism behind the deterioration of coal samples under the water–rock interaction. The results indicated that: (1) the saturated water content of coal samples exhibited a progressive increase as the water immersion times increased, but with a diminishing rate of growth. (2) As the water immersion times increased, the compressive strength, cohesive force, and internal friction angle of coal samples gradually decreased. Notably, the deterioration effect was more pronounced in compressive strength and cohesive force, while the decline in internal friction angle was relatively minor, and the total deterioration degree and the stage deterioration degree of the above three had evident cumulativity and non-uniformity. The progressive rise in water immersion times led to a gradual attenuation of the deterioration effect. Meanwhile, the confining pressure exhibited a certain inhibitory impact on the strength deterioration of coal samples. (3) Compared to the dry coal samples, the average AE count rate of coal samples subjected to a single water immersion exhibited a significant decrease, and subsequent water immersion for two, three, and four times resulted in a very minor decrease in the average AE count rate. (4) The AE cumulative ringing counts in coal samples exhibited varying degrees of reduction as water immersion times increased. Specifically, the most significant decrease in AE cumulative ringing counts occurred after the initial water immersion, followed by a gradual decrease thereafter. The energy-releasing capacity of coal samples decreased, while their plasticity exhibited a gradual increase. (5) A damage model was developed for coal samples based on the water immersion times. The model indicated that the damage to coal samples increased as the water immersion times increased, and the damage rate gradually decreased and eventually stabilized. (6) The deterioration mechanism of coals under the water–rock interaction was explained. Through repeated water immersion, the physical, chemical, and mechanical interactions between water and coal induced alterations in the internal microstructure of coal samples, resulting in the deterioration of mechanical properties such as compressive strength, cohesive force, and internal friction angle, which was a cumulative damage process from the microscopic to the macroscopic level.

Study on the microscopic mechanism of strength softening and multiple fractal characteristics of coal specimens under different water saturation

Mechanical Failure Modes and Fractal Characteristics of Coal Samples under Repeated Drying–Saturation Conditions

Experimental Investigation on the Tensile Strength of Coal: Consideration of the Specimen Size and Water Content

Multifractal Characterization Of The Inhomogeneous Strain Evolution Of The Dehydrated Coal: Insight From Coal Microstructure

Experimental Study on Shear Characteristics of Coal Samples in Different Water-Bearing States

Mechanisms of failure in coal samples from underground water reservoir

Effects of Water on Mechanical Behavior and Acoustic Emission Characteristics of Coal in Brazilian Tests

Experimental Investigation on Mechanical and Damage Properties of Single Fractured Coal Subjected to Water Pressure and Triaxial Compression

Experimental study on mechanical damage characteristics of water-bearing tar-rich coal under microwave radiation

Macroscopic and microscopic mechanical behavior and seepage characteristics of coal under hydro-mechanical coupling

Study on Microscopic Mechanism and Failure Mode of Water–Rock Coupling in Fine Sandstone Under Uniaxial Compression

Microstructural Evolution and Damage Mechanism of Water-Immersed Coal Based on Physicochemical Effects of Inorganic Minerals

Fracture Development Patterns and Micro–Macrostructural Fractal Characteristics of Acid–Base Coal Samples

Mechanical and micro-structural damage mechanisms of coal samples treated with dry–wet cycles

Influence characteristics and macro-meso mechanism of pressure immersion time on tensile properties for coal materials

Weakening Mechanism and Infrared Radiation Characteristics of Coal with Different Moisture Contents in the Brazilian Test

Investigation of dynamic fracture behavior and energy dissipation of water-bearing coal under impact load

Study on the Mechanical Characteristics and Microscopic Response Mechanisms of Sandstone under Pressurized Water Absorption

The Changing of Micromechanical Properties of Coal after Water Immersion: The Insight from Nanoindentation Test

Experimental and numerical investigation on failure characteristics and mechanism of coal with different water contents

Study on the strength deterioration characteristic and damage model of coal pillar dams with repeated water immersion in underground reservoirs