Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. After pneumatic shot peening, compressive residual stress is induced on the surface of the target, which will improve the fatigue life. During the process, surface roughness is also induced, which may reduce the fatigue life. To achieve the optimum compressive residual stress with the smallest surface roughness, the formation mechanism of the residual stress field and the surface topography are revealed. Then, pneumatic shot peening is simulated by using a discrete element method–finite element method coupled model. Based on the effects of four variables (the incident angle θ, the initial shot velocity v0, the shot radius R) and the mass flow rate rm on five parameters (the equivalent plastic strain, the equivalent stress, the surface compressive residual stress, the maximum compressive residual stress), the surface roughness is investigated. The results show that it induces a residual elastic–plastic strain after the impact of a single shot, which can form a crater and a hemispherical residual stress field. After the impact of many random shots, scattered craters connect with each other, therewith a rough and continuous surface topography is formed. Scattered residual stress fields couple with each other, and a constant residual stress layer with the compressive residual stress in the surface and the tensile residual stress in the subsurface are formed. All five parameters are determined by the residual elastic–plastic strain, which increases as the augment of the normal impact velocity, the shot mass, and the coverage rate. Along with the increase of θ and rm, these five parameters firstly increase and then decrease; with the increase of v0 and R, these five parameters increase. Therefore, reasonable values of θ, v0, R, and rm should be chosen to obtain the optimum compressive residual stress with as small surface roughness as possible.

Surface integrity of gear shot peening considering complex geometric conditions: A sequential coupled DEM-FEM method

A computational model of wear evolution for shot peened surfaces of gear steel

A study of the effect of dual shot peening on the surface integrity of carburized steel: combined experiments with dislocation density-based simulations

An evaluation on SP surface property by means of combined FEM-DEM shot dynamics simulation

Analysis of residual stress of gear tooth root after shot peening process

An experimental and numerical coupled method to predict grain refinement and mechanical properties of gradient microstructure material by shot peening

A theoretical model for predicting the surface topography of inhomogeneous materials after shot peening

An Impact Energy Erosion Model with an Energy Allocation Rule for the Discrete Element Method

Coupling Mechanism Between Systematic Elastic Deformation and Gear Surface Damage

Studies on residual stress and surface topography after pneumatic shot peening using discrete element method–finite element method coupled model

Surface integrity and transmission performance of spiral bevel gears subjected to shot peening: A comparison between concave and convex surfaces

Development of a DEM Method for Predicting Wear Distribution on Particle Scale

Shot Stream Finite Element Model for Shot Peening Numerical Simulation and Its Experiment Study

The effect of fine particle peening on aviation gear performance, Part I: Surface integrity

Elastic Contact Analysis of Shot-Peened Rough Surfaces

Accurate superposition modeling method of grinding-shot peening surfaces

Effect of Shot Peening on the Surface Properties and Wear Behavior of Heavy-Duty-axle Gear Steels

A simulation modeling methodology considering random multiple shots for shot peening process

Numerical Modeling Design for the Hybrid Additive Manufacturing of Laser Directed Energy Deposition and Shot Peening Forming Fe–Cr–Ni–B–Si Alloy

Elastohydrodynamic Lubrication Characteristics of Spiral Bevel Gear Subjected to Shot Peening Treatment

Effect of shot peening on the surface integrity and fatigue property of gear steel 16Cr3NiWMoVNbE at room temperature