Abstract:The lithium metal anode (LMA) is considered the most promising anode material due to its high specific capacity and low electrode potential.The energy density is doubled by replacing the graphite anode in a lithium-ion battery with LMA. However, the formation of an unstable solid electrolyte interphase (SEI) and dendrite growth of LMA limit the practical applications of lithium metal batteries. A well-formed SEI can effectively passivate the lithium metal surface, preventing further reactions between LMA and electrolyte. However, the mechanical stability of the SEI formed in a general electrolyte is poor. The SEI ruptures due to the violent expansion and contraction of the LMA, resulting in continuous electrolyte consumption. Meanwhile, the inhomogeneous deposition of lithium metal can cause severe dendrite growth. Lithium dendrites have a high specific surface area, which increases active lithium and electrolyte consumption. Once the lithium dendrites pierce the separator, safety issues arise. Furthermore, the inhomogeneous stripping behavior of lithium metal can cause partially active lithium to lose its conductive connection with the substrate, resulting in a loss of reversible capacity. This results in lower coulombic efficiency and shorter cycle life for LMA. During the platting/stripping process, lithium ions first pass through the SEI. Therefore, the composition and structural distribution of the SEI have a decisive effect on the deposition/dissolution behavior of lithium. Understanding the composition and structure of SEI is crucial for solving the historical challenges of LMA. In recent years, researchers have made significant progress towords understanding SEI through advanced characterization and analysis tools, such as cryo-electron microscopy, titration gas chromatography, atomic force microscopy, and nuclear magnetic resonance. However, the conventional experimental methods developed so far have considerable spatial and temporal resolution limitations. It is difficult to understand the interfacial reaction mechanism and the effect of interfacial composition on ion transport using a single experimental method. A combination of experiments and theoretical calculations, such as density functional theory, can simulate the interfacial reaction and help understand the mechanism of interface formation. Molecular dynamics simulation can be used to predict the interfacial lithium-ion transport paths. The experimental process can be simplified using machine learning to screen the experimental design. In the future, the close integration of theoretical calculations and experiments will be a major driving force for developing high energy density lithium metal batteries. This review summarizes the characterization techniques and regulation strategies of SEI, such as electrolyte optimization design, artificial SEI, and current collector design. Among them, we focused on the electrolyte composition design, the most direct and efficient means. By changing the composition and ratio of the electrolyte, the interfacial reaction process can be directly affected to form a stable SEI, which inhibits the continuous consumption of active lithium and the growth of dendrites. Simultaneously, we introduced the current state of interphase research in lithium metal pouch cells. This review has a certain guiding significance for LMA toward practical applications.

Strategy for Stable Interface in Lithium Metal Batteries: Free Solvent Derived vs Anion Derived

Engineering a Dynamic Solvent-Phobic Liquid Electrolyte Interphase for Long-Life Lithium Metal Batteries

Tuning the Solution Structure of Electrolyte for Optimal Solid-Electrolyte-interphase Formation in High-Voltage Lithium Metal Batteries

Adjusting Interfacial Reactions for Achieving Highly Stable Operation in Lithium Metal Batteries

Electrolyte and interphase engineering through solvation structure regulation for stable lithium metal batteries

Regulating the electrolyte solvation structure by weakening the solvating power of solvents for stable lithium metal batteries

Stabilization of Lithium Metal Interfaces by Constructing Composite Artificial Solid Electrolyte Interface with Mesoporous TiO2 and Perfluoropolymers

Rational design of electrolyte solvation structure for stable cycling and fast charging lithium metal batteries

Highly Stable Lithium Metal Batteries Enabled by Regulating the Li+ Solvation in Nonaqueous Electrolyte.

Understanding and Modifying Strategies for Lithium Metal Anode Solid Electrolyte Interphase

Anion-Dominated Solvation in Low-Concentration Electrolytes Promotes Inorganic-Rich Interphase Formation in Lithium Metal Batteries

Beyond LiF: Tailoring Li2O-Dominated Solid Electrolyte Interphase for Stable Lithium Metal Batteries.

Stable Anion‐Derived Solid Electrolyte Interphase in Lithium Metal Batteries

Solvent-derived Inorganic F and N-rich Solid Electrolyte Interface for Stable Lithium Metal Batteries

Tailoring the Passivation Layer on Lithium Metal Anode and Aluminum Collector by Regulating the Solvation Structure to Enhance the Long-Term Cycling of Lithium Metal Batteries

Reduction‐Tolerance Electrolyte Design for High‐Energy Lithium Batteries

Enhancing stable LiF-rich interface formation of polyester based electrolyte using fluoroethylene carbonate for quasi-solid state lithium metal batteries

Steric Effect Tuned Ion Solvation Enabling Stable Cycling of High-Voltage Lithium Metal Battery

Interphase Engineering via Solvent Molecule Chemistry for Stable Lithium Metal Batteries

Fluorinating Solid Electrolyte Interphase by Regulating Polymer–Solvent Interaction in Lithium Metal Batteries

Concentrated Electrolyte for Stable Lithium Metal Anode