Abstract:In this work, a photonic crystal fiber (PCF) refractive index (RI) sensor has been designed and optimized. The RIs range covered by the sensor is from 1.38 to 1.41. The proposed optical sensor has three layers of air holes with 24, 12 and 6 holes in each layer. The geometry parameters of the proposed sensor (the radius of the air holes and the thickness of the plasmonic layer) have been optimized using the Nelder-Mead algorithm and the FEM numerical with the objective of achieving the highest sensitivity. To achieve an optimized structure with minimal sensitivity to fabrication errors, the rotation angle of the hole layers has been analyzed. The results indicate that, due to the specific geometry of the proposed structure, variations in the rotation angle and displacement of the air holes have no significant impact on the outcomes. The results also indicate that the sensor's maximum amplitude sensitivity (AS), maximum wavelength sensitivity (WS), and figure of merit (FOM) are 10000 (RIU −1 ), 23000 (nm/RIU) and 131 (RIU −1 ) respectively. The optimized design provides high sensitivity, a wide diagnostic range for the detection of the analytes' RIs, and the advantages of a gold plasmonic layer, ensuring high stability in biological environments. This combination results in enhanced performance of the sensor for various applications particularly in biosensing and medical fields. The designed structural geometry also eliminates the effects of tolerances in manufacturing processes which makes the proposed PCF device a very efficient sensor.

Optimized hybrid plasmonic waveguide-based ring resonator for advanced refractive index sensing

Racetrack Ring Resonator-Based on Hybrid Plasmonic Waveguide for Refractive Index Sensing

Parametric Optimization of Hybrid Plasmonic Waveguide-Based SOI Ring Resonator Refractive Index Sensor

Plasmonic Refractive Index Sensor with High Figure of Merit Based on Concentric-Rings Resonator

Hybrid Dielectric-Loaded Plasmonic Waveguide and Wavelength Selective Components for Efficiently Controlling Light at Subwavelength Scale

Numerical Investigations of a Near-Infrared Plasmonic Refractive Index Sensor with Extremely High Figure of Merit and Low Loss Based on the Hybrid Plasmonic Waveguide-Nanocavity System

High sensitivity plasmonic sensing based on Fano interference in a rectangular ring waveguide

A Voyage from Plasmonic to Hybrid Waveguide Refractive Index Sensors Based on Wavelength Interrogation Technique: a Review

Waveguide controlled long range surface plasmon-polariton refractive index sensor

Double-Ring Resonator Plasmonic Refractive Index Sensor Utilizing Dual-Band Unidirectional Reflectionless Propagation Effect

Compact resonant plasmonic hybrid waveguide refractive index sensors for aqueous medium

Double-Slot Hybrid Plasmonic Ring Resonator Used for Optical Sensors and Modulators

Numerical Investigation of a Highly Sensitive Plasmonic Refractive Index Sensor for the Detection of Breast and Cervical Cancer Biomarkers

Optimization of highly sensitive three-layer photonic crystal fiber sensor based on plasmonic

Highly sensitive plasmonic sensor with a coupled split-square-ring resonator

Periodic stub implementation with plasmonic waveguide as a slow-wave coupled cavity for optical refractive index sensing

Numerical analysis of a near-infrared plasmonic refractive index sensor with high figure of merit based on a fillet cavity.

Ultra-high figure of merit refractive index sensor based on concentric ring and disk resonator

Fano Resonance Hybrid Waveguide-Coupled Plasmonic Sensor Using Transparent Conductive Oxide in the Near-Infrared Range

Plasmonic RI Sensor Design Based on Fano Resonance with MIM Waveguide Coupled by the Concentric Annulus Cavity

A High-Sensitivity Refractive-Index Sensor Based on Plasmonic Waveguides Asymmetrically Coupled with A Nanodisk Resonator