Abstract:Aim: This study aimed to evaluate the hypothesis that the utilization of percutaneous screw guides enhances the precision of screw placement in the surgical fixation of talar fractures. Methods: Computed tomography (CT) scans of ankle joints were obtained from 40 healthy adults and 10 cadaveric specimens between April 2019 and August 2020 at Ningbo No. 6 Hospital. The acquired CT data were imported into Materialise Interactive Medical Image Control System (MIMICS) software for processing. Three-dimensional (3D) digital models of the ankle joints were reconstructed, and relevant anatomical parameters were measured. A percutaneous screw guide (PSG) was designed and fabricated to facilitate accurate screw placement in the posterior talar process. Ten eligible cadaveric ankle joints were selected for further analysis and their 3D models were reconstructed using the MIMICS software. Screw trajectory parameters were then measured and analyzed based on these cadaveric models, forming the model group for comparative analyses. Ten cadaveric specimens were utilized in this study, equally divided into two groups: a guider group (n = 5) and a free-hand group (n = 5). In the guider group, talar posterior process screws were inserted using percutaneous screw guidance. In the free-hand group, screws were inserted into the talar posterior process without guidance. Post-operative CT scans were performed on all specimens. The following parameters were quantitatively compared between the two groups: screw trajectories, entry point distances in specimens with preselected screws, entry point distance trajectories in the 3D model, operation time, frequency of fluoroscopic imaging, and number of drilling attempts. Results: Following the generation of the 3D models from 10 cadavers, a virtual screw was digitally inserted into each model. In the model group, the preselected screw trajectory was oriented towards the medial aspect of the talar neck base, with a cephalad inclination angle (CIA) of 3.1° ± 1.5° in the transverse~plane and a medial diverge angle (MDA) of 12.0° ± 1.4° in the coronal plane. The CIA and MDA of the screw trajectory in the guider group were 2.1° ± 1.7° and 11.2° ± 1.6°, respectively, whereas the CIA and MDA in the free-hand group were 6.0° ± 2.2° and 18.8° ± 1.6°, respectively. Statistical analysis revealed significant differences in both CIA and MDA between the two groups (p < 0.05). Furthermore, the guider group yielded superior outcomes in terms of entry point distance, operation time, fluoroscopic exposure time, and number of drilling attempts compared to the free-hand group (p < 0.05). Conclusions: Percutaneous screw guidance can improve the accuracy and safety of the posterior process of the talar screws, which can be feasible for percutaneous fixation. Further studies are required to confirm the efficacy and clinical outcomes of percutaneous screw guidance.

Three-dimensional Printing Technique Aids Screw Insertion into the Sustentaculum Tali of the Internal Fixation of Intra-Articular Calcaneal Fractures

Internal Fixation with Dual Incisions and Mini Plates for Calcaneal Fractures of Sanders Type Ⅲ

Three-dimensional printed cast assisted screw fixation of calcaneal fractures: a prospective study

Three-Dimensional Fluoroscopy For Evaluation of Articular Reduction and Screw Placement in Calcaneal Fractures

Pre-operative simulation using a three-dimensional printing model for surgical treatment of old and complex tibial plateau fractures

Postoperative 3D computed tomographic evaluation of 92 calcaneal fracture reduction using the sinus tarsi technique and fixation with 3.5 mm cortical screws

3D PRINTING IN COMPLEX TIBIAL FRACTURE CLASSIFICATION & PLANNING

Intraoperative Three-Dimensional Imaging in Calcaneal Fracture Treatment

The Efficacy of 3D Printing Model in the Intraarticular Osteotomy in the Treatment of Malunion of Tibial Plateau Fracture

Intraoperative 3D Imaging in Calcaneal Fracture Care—Clinical Implications and Decision Making

3D printing combined with anteroposterior cannulated screws for the treatment of posterolateral tibial plateau fracture

Effect of Intraoperative Three-Dimensional Imaging During the Reduction and Fixation of Displaced Calcaneal Fractures on Articular Congruence and Implant Fixation

[Application of three-dimensional printing technology in treatment of internal or external ankle distal avulsed fracture]

Reconstruction of Severe Acetabular Bone Defect with 3D Printed Ti6Al4V Augment: A Finite Element Study

Patient-specific instrument-assisted minimally invasive internal fixation of calcaneal fracture for rapid and accurate execution of a preoperative plan: A retrospective study

Using 3D printing-assisted shaping titanium cages and Masquelet techniques to reconstruct calcaneal osteomyelitis complicated by extensive soft tissue and uncontrolled defects

3D printing technology combined with personalized plates for complex distal intra-articular fractures of the trimalleolar ankle

Effect of a Percutaneous Screw Guide on Screw Placement for Posterior Talar Fractures

Effect of additional free sustentaculum tali screw fixation through modified sinus tarsi approach on intra-articular calcaneal fractures