Abstract:In the hydraulic fracturing process, fracturing fluid contacts coal rock and physical and chemical reactions occur, which inevitably damage the pore structure of the coal rock and affect the adsorption and desorption capacity of the coal rock. In this paper, a low-temperature N adsorption method and scanning electron microscopy (SEM) were used to characterize coal samples. Using gas adsorption/desorption tests, high-, medium-, and low-rank coal samples before and after the clean fracturing fluid treatment were systematically studied. According to the relationship between coal pore structure parameters and gas adsorption/desorption characteristics, a correlation between the microscopic pore structure and the macroscopic gas adsorption/desorption characteristics of coal was obtained. The results show that the number of closed pores in high-, medium-, and low-rank coal samples increased after the clean fracturing fluid treatment. The micropore volume increased by 0.0009, 0.00143, and 0.0035 mL/g, respectively, and the specific surface area increased by 4.87, 9.06, and 57.60%. The fractal dimension also increased compared with that of raw coal. SEM analysis indicated that the influence degree of clean fracturing fluid treatment on the pore structure of different-rank coal samples was Gengcun low-rank coal > Pingba middle-rank coal > Jiulishan high-rank coal. The experimental results of methane adsorption and desorption showed that the adsorption capacity of the coal samples after clean fracturing fluid treatment was enhanced, which is related to increases in the micropore proportion, micropore volume, and specific surface area of the coal. The desorption capacity of the coal samples was also enhanced. The desorption rate of medium- and high-rank coal samples increased after the clean fracturing fluid treatment but that of low-rank coal samples decreased. The main reason is the increase in the number of micropores in low-rank coal, which enhances the gas adsorption ability and makes gas desorption difficult. Therefore, clean fracturing fluid is suitable for medium- and high-grade metamorphic coalbed methane mines. These research results provide a theoretical basis for the application of clean fracturing fluid in different coalbed methane wells.

Study on the Permeability Enhancement of Propped Fractures under the Action of a Coal Fine Plugging Removal Agent

Understanding the Interactions of NaClO Oxidant with Coal for Intensified Hydraulic Fracturing Effectiveness

Experimental Method to Simulate Coal Fines Migration and Coal Fines Aggregation Prevention in the Hydraulic Fracture

Investigating the proppant damage mechanisms expected in a propped coal fracture and its effect on fracture flow

Effective application of proppants during the hydraulic fracturing of coal seam gas reservoirs: Implications from laboratory testings of propped and unpropped coal fractures

Static expansion fracturing mechanism for enhancing gas permeability in low permeability coal seams

Study on Gas Adsorption-Desorption and Diffusion Behaviour in Coal Pores Modified by Nano Fracturing Fluid

Investigation on Pulverized Coal Control Using Calcium Sulfoaluminate Cementitious Proppants in Coalbed Methane Fracturing

A novel approach for using silica nanoparticles in a proppant pack to fixate coal fines

The effect of anionic surfactant (SDS) on pore-fracture evolution of acidified coal and its significance for coalbed methane extraction

Experimental study of effect of slickwater fracturing on coal pore structure and methane adsorption

Stable Dispersion of Coal Fines during Hydraulic Fracturing Flowback in Coal Seam Gas Reservoirs An Experimental Study

Cracks Propagation and Permeability Enhancement Caused by Supercritical CO 2 and Water Fracturing in Natural Coal–Rock Combination

Study on Eliminating the Water Blocking Effect in Coal Seams Using Gas-Wetting Reversal Technology

Fracture permeability damage and recovery behaviors with fracturing fluid treatment of coal: An experimental study

Study on the technology of permeability enhancement of deep hole pre-splitting blasting in a low-permeability coal seam

Experimental Investigation of the Use of Expansive Materials to Increase Permeability in Coal Seams Through Expansive Fracturing

Modelling of enhanced gas extraction in low permeability coal seam by controllable shock wave fracturing

Experimental study on coal blockage removal based on pulverized coal blockage

A study on the impact of ultrasonic-stimulated clean fracturing fluid on the pore structure of medium to high rank coal

Pore Structure Characteristics and Adsorption and Desorption Capacity of Coal Rock after Exposure to Clean Fracturing Fluid.