Abstract:Based on the peridynamics method,the bond model was applied to treat the thermal diffusion of rock and the conventional state model was adopt to simulate the displacement evolution.According to the number of broken bonds between material points,the material damage was determined to track real-time fracture propagation.The interaction between water and rock was realized by applying pressure and temperature of water to fracture surface.And a numerical model was proposed to simulate hydraulic fracturing in high-temperature rock considering the thermal-mechanical coupling effect.The accuracy of the proposed model was verified according to the test results of rock heating fracture propagation.Finally,the morphology of hydraulic fracturing-induced rock fractures were discussed considering the effects of water pressure,rock initial temperature and elastic modulus,the sensitivity of each factor to fracture geometry parameters was analyzed based on the comprehensive sensitivity attribute identification method.The results indicate that under conditions of low water pressure or initial rock temperature,the primary fractures exhibit a near-symmetric distribution,and there is almost no fracture branching.With the increase of water pressure or initial temperature,the number of fracture gradually increases and the bifurcation occurs,the total length and opening degree of fracture also increase.When the mean elastic modulus of rock is small,the fractures are well developed and many tiny cracks appear.With the increase of the average elastic modulus,the number of fracture branches and micro-fractures decreases obviously,and the total length and opening degree of fractures also decrease accordingly,while the rock fracture initiation time increases approximately linearly.The comprehensive sensitivity evaluation of rock material parameters and environmental parameters shows that rock fracture propagation is highly sensitive to elastic modulus and water pressure,but insensitive to water temperature.

A spatial nonlocal Green-Naghdi generalized thermoelasticity model based on bond-based peridynamics: Transient responses of laminated structures subjected to thermal shock

Transient response of interface crack-containing plates during non-Fourier heat conduction processes based on peridynamic Green-Naghdi-III model

Thermoelastic response of laminated plates considering interfacial conditions and cracks based on peridynamics

Non-Fick Diffusion–elasticity Based on a New Nonlocal Dual-Phase-lag Diffusion Model and Its Application in Structural Transient Dynamic Responses

A modified Green–Lindsay thermoelasticity with strain rate to eliminate the discontinuity

Nonlocal theory of thermoelastic diffusive materials and its application in structural dynamic thermo-elasto-diffusive responses analysis

Two-dimensional Thermal Shock Problem of Generalized Thermoelastic Multilayered Structures Considering Interfacial Conditions

Nonlocal anisotropic model for deformation and fracture using peridynamic operator method

An Extended Ordinary State-Based Peridynamic Model for Nonlinear Deformation and Fracture

Nonlocal thermoelasticity based on nonlocal heat conduction and nonlocal elasticity

The implicit stabilized dual-horizon peridynamics-based strain gradient damage model

Transient responses of bi-layered structure based on generalized thermoelasticity: Interfacial conditions

Nonlocal thermoelasticity and its application in thermoelastic problem with temperature-dependent thermal conductivity

Combining Peridynamics and Generalized Interpolation Material Point Method Via Volume Modification for Simulating Transient Responses

Thermodynamically consistent non-local damage formulation for fluid-driven fracture in poro-viscoelastic media

A non-local heat transport model in solids with discontinuities via Lagrangian particle method

A Peridynamic Model for Contact Problems Involving Fracture

A Modified Bond-Associated Non-Ordinary State-Based Peridynamic Model for Impact Problems of Quasi-Brittle Materials

A Numerical Simulation of High-Temperature Rock Hydraulic Fracturing Based on Coupled Thermo-Mechanical Peridynamics

On nonlocal cohesive continuum mechanics and Cohesive Peridynamic Modeling (CPDM) of inelastic fracture

A micropolar peridynamics model with non-unified horizon for damage of solids with different non-local effects