Abstract:Elastomer composites with low hysteresis are of great importance for sustainable development, as they find application in billions of tires. For these composites, a filler such as silica, able to establish a chemical bond with the elastomer chains, is used, in spite of its technical drawbacks. In this work, a furnace carbon black (CB) functionalized with polar groups was used in replacement of silica, obtaining lower hysteresis. CBN326 was functionalized with 2-(2,5-dimethyl-1H-pyrrol-1-yl)-1,3-propanediol (serinol pyrrole, SP), and samples of CB/SP adducts were prepared with different SP content, ranging from four to seven parts per hundred carbon (phc). The entire process, from the synthesis of SP to the preparation of the CB/SP adduct, was characterized by a yield close to 80%. The functionalization did not alter the bulk structure of CB. Composites were prepared, based on diene rubbers-poly(1,4-cis-isoprene) from Hevea Brasiliensis and poly(1,4-cis-butadiene) in a first study and synthetic poly(1,4-cis-isoprene) in a second study-and were crosslinked with a sulfur-based system. A CB/silica hybrid filler system (30/35 parts) was used and the partial replacement (66% by volume) of silica with CB/SP was performed. The composites with CB/SP exhibited more efficient crosslinking, a lower Payne effect and higher dynamic rigidity, for all the SP content, with the effect of the functionalized CB consistently increasing the amount of SP. Lower hysteresis was obtained for the composites with CB/SP. A CB/SP adduct with approximately 6 phc of SP, used in place of silica, resulted in a reduction in ΔG'/G' of more than 10% and an increase in E' at 70 °C and in σ300 in tensile measurements of about 35% and 30%, respectively. The results of this work increase the degrees of freedom for preparing elastomer composites with low hysteresis, allowing for the use of either silica or CB as filler, with a potentially great impact on an industrial scale.

The effect of functionalization in elastomers: Construction of networks

Improvement of Silica Dispersion in Solution Polymerized Styrene–Butadiene Rubber Via Introducing Amino Functional Groups

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Introducing Mechanochemistry into Rubber Processing: Green-Functionalized Cross-Linking Network of Butadiene Elastomer

Facile strategies for green tire tread with enhanced filler-matrix interfacial interactions and dynamic mechanical properties

A Novel Strategy to Functionalize Styrene Butadiene Rubber Toward Enhanced Interfacial Interaction with Silica

Adducts of Carbon Black with a Biosourced Janus Molecule for Elastomeric Composites with Lower Dissipation of Energy

Carbon Black Functionalized with Serinol Pyrrole to Replace Silica in Elastomeric Composites

Designing High-Performance Green Tire Treads by Reinforcing the Styrene-Butadiene Rubber/Silica Interface with Chain Difunctionalization

Heterogeneous Network Design Strategy Toward Mechanically Robust and Recyclable Elastomers

Interface Coupling in Rubber/Carbon Black Composites toward Superior Energy-Saving Capability Enabled by Amino-Functionalized Polysulfide

Preparation, Structure, and Properties of End‐functionalized Miktoarms Star‐shaped Polybutadiene–sn–poly(styrene–butadiene) Rubber

HIGH PERFORMANCE AND FUNCTIONALITY MODIFICATION OF ELASTOMER MATERIALS

High performance bio-based elastomers: energy efficient and sustainable materials for tires

Performance Enhancement of Polymerized, Functionalized Solution Styrene–Butadiene Rubber Composites Using Oligomeric Resin Towards Extremely Safe and Energy-Saving Tires

Effect of the structural characteristics of solution styrene-butadiene rubber on the properties of rubber composites

A Facile and Environmentally Friendly Approach to Fabricate Hybrid Crosslinked Nitrile Butadiene Rubber with Comprehensively Improved Mechanical Performances by Incorporating Sacrificial Ionic Bonds

Molecular dynamics simulation of the impact of the surface topology of carbon black on the mechanical properties of elastomer nanocomposites

Manipulating the mechanical properties of cis-polyisoprene nanocomposites via molecular dynamics simulation

CORRELATION OF FILLER NETWORKING WITH REINFORCEMENT AND DYNAMIC PROPERTIES OF SSBR/CARBON BLACK/SILICA COMPOSITES

Effects of Compatibilizing Agent and in Situ Fibril on the Morphology, Interface and Mechanical Properties of EPDM/nylon Copolymer Blends