Multi-Beam Graded Dielectric Lens Antenna from Multi-Material 3D Printing

Henry Giddens,Yang Hao

DOI: https://doi.org/10.48550/arXiv.2004.03880

2020-04-08

Applied Physics

Abstract:Modern communication systems will require antennas with adaptive functionality which are able to modify their performance based on the requirements of the channel. For example, mobile ad-hoc networks need directive antennas that are able to radiate in any direction across the 360{\deg} azimuth plane. Conformal antennas that can be simply operated to have multi-functional performance characteristics are therefore of interest. In this paper, we present a gradient-index lens antenna designed to radiate with a 45{\deg} beamwidth across 8 different sectors. When fed by a simple switched feeding network, the lens is able to provide 360{\deg} azimuth coverage in 45{\deg} segments. Further analysis of the radiation patterns shows how two distinct multi-beam patterns can be produced from simple feed networks and simultaneous excitation of each feeding element. The proposed lens is fabricated by multi-material 3D printing. The final lens radiates with a gain of 8.5 dBi when a single sector is excited, and with a maximum gain of 5.9 dBi in multi-beam mode. Finally, it is shown how the lens can also radiate omnidirectionally when optimised phase and amplitude weightings are applied to each port.