Abstract:Carbon capture and storage (CCS) has been identified as transformative technologies to achieve maximum reductions in CO2 emissions specified under the Kyoto Protocol. Historically, CO2 was first stored in reservoir indirectly back in 1970s during Enhanced Oil Recovery (EOR) process. Subsequently in 1996, the Sleipner CO2 storage project was officially implemented in Norway providing reference to future CO2 storage projects. As one of the main players in the oil and gas industries, PETRONAS has been proactive in finding an end-to-end technology development for CCS. The S field, a non-associated gas field, located 250km Offshore Sarawak Malaysia has recently been identified as a potential pilot for hydrocarbon production and CO2 storage as well as for surface and subsurface technologies maturation. The S field, a carbonate builds up platform is considered heterogeneous type of reservoir with porosity ranging from 15% to 40% and permeability ranging from 10md to 1300md. The S field contains 70mol% CO2 gas contents/30mol% hydrocarbons with some amount of impurities, N2, H2S and Hg. As a baseline development strategy to support this technology project, pure CO2 injection was considered, taking into account the separation technology efficiency to separate CO2 from other contaminants back into the same reservoir aquifer. However, due to some limitation on the surface technologies and economy limits, traces of impurities might be present in the system. There is a possibility of CO2 being co-injected with impurities, for instance H2S. The effect of the contaminant in the injected CO2 stream needs to be accessed to ensure the success of the CCS operation. Changes in base CO2 solubility may ultimately affect storage integrity and capacity. Since abundant solubility data of CO2 in water or brine are available in the literature and less data for this ternary system indicates that the understanding in quantifying the impact of this H2S impurity on CO2 solubility is essential. In this communication, extensive laboratory experiments on vapour-liquid equilibrium on the binary CO2-H2O (for experimental method validation) and ternary systems, CO2-H2S-H2O and CO2-H2S-Brine (0.35M) have been conducted at 423.15K, under pressure range of 1-35 MPa. The experimental method used in this work is the static-analytic type, taking advantage of two magnetic capillary samplers (Rolsi®, Armine’s Patent) developed in the CTP laboratory. This method allows the sampling of the mixture in both vapour and liquid phases and their analysis by Gas Chromatograph (GC). Thermodynamic modelling using the simplified Cubic Plus Association (sCPA) equation of state was able to satisfactorily describe the phase behaviour of the ternary systems. The impact of this H2S on CO2 injection for CCS has been further evaluated using numerical reservoir simulation. Existing reservoir dynamic modelling has been improved by incorporating the new experimental data. Simulations results were analysed based on the volume of CO2 dissolved in water and the total volume of CO2 gas injected. It shows that the introduction of H2S in injected CO2 promote a reduction of CO2 dissolved in water by 15%, however it eventually offers a similar amount of CO2 storage over long period of time.

Understanding the Fate of H2S Injected in Basalts by Means of Time‐Domain Induced Polarization Geophysical Logging

Advanced Monitoring of H 2 S Injection through the Coupling of Reactive Transport Models and Geophysical Responses

Experimental simulation of H2 coinjection via a high-pressure reactor with natural gas in a low-salinity deep aquifer used for current underground gas storage

Numerical modeling of reinjection and tracer transport in a shallow aquifer, Nesjavellir Geothermal System, Iceland

Integrated stable S isotope, microbial and hydrochemical analysis of hydrogen sulphide origin in groundwater from the Legnica-Głogów copper District, Poland

Oilfield Reservoir Souring During Waterflooding: A Case Study with Low Sulphate Concentration in Formation and Injection Waters

A Holistic Approach to Simulate the Impact of H2S on Production and Injection Surface Facilities Using an Integrated Asset Model as a Digital Twin

Solute Tracer Test Quantification of the Effects of Hot Water Injection into Hydraulically Stimulated Crystalline Rock

Pore-scale visualization of hydrogen storage in a sandstone at subsurface pressure and temperature conditions: Trapping, dissolution and wettability

Reactive transport experiments of coupled carbonation and serpentinization in a natural serpentinite. Implication for hydrogen production and carbon geological storage

ANALYSIS OF CHEMICAL MONITORING DATA DURING REINJECTION INTO THE LAUGALAND GEOTHERMAL FIELD,S-ICELAND

Influence of Scco(2) Injection on Precipitation and Metals Migration, and Changes in Electrical Resistivity

Impact of H2S in Predicting the Storage Efficiency of CO2 Injection in a High Pressure High Temperature (HPHT) Carbonate Aquifer - A Case Study in a Sarawak Offshore High CO2 Gas Field, Malaysia

Rapid carbon mineralization for permanent disposal of anthropogenic carbon dioxide emissions

Artificial SLiMEs and gas storage in deep subsurface

Effects of impurities H2S and N2 on CO2 migration and dissolution in sedimentary geothermal reservoirs

Microbial impact on basalt‐water‐hydrogen system: Insights into wettability, capillary pressure, and interfacial tension for subsurface hydrogen storage

Assessment of the in situ biomethanation potential of a deep aquifer used for natural gas storage

Laboratory study of cyclic underground hydrogen storage in porous media with evidence of a dry near-well zone and evaporation induced salt precipitation

A Feasibility Study of CO2geologic Sequestration Integrating Reservoir Simulation, Rock-Physics Theory, and Seismic Modeling

Radiolytic Hydrogen Production in the Subseafloor Basaltic Aquifer