Abstract:Evaluating the mechanical properties of biodegradable implants can be challenging for in situ experiments and time-consuming for materials with a slow degradation rate, such as polycaprolactone (PCL). In this work, the effects of chain scission and water erosion on the mechanical properties of degraded PCL are investigated by molecular dynamics simulation. The decrease of the mechanical performance is correlated with the increase of the nonaffine displacement during the degradation. The nonaffine squared displacements (NSD) during the tensile deformation are calculated by subtracting the affine squared displacements from the mean squared displacements. After chain scission, short polymer chains increase the NSD of the system and weaken the modulus of the polymer matrix. The effect of the NSD is also observed in a water erosion model. When the bond break ratio is less than 5%, PCL still maintains a well-entangled network, which constrains the diffusion of the water molecules, resulting in a higher modulus of the erosion model than the chain scission model at a low degradation rate. The effect of NSD is also found in the PCL/graphene composites. For the degraded polymer chains, the diffusion of PCL is constrained by the graphene network, and such an effect increases during the degradation. As a result, the addition of graphene nanosheets slows down the decreasing trend of Young's modulus. Such findings can also explain the size effect of the graphene reinforcement on the mechanical properties of the polymer composites. This work provides atomistic insights into the mechanical property evolution during polymer degradation, revealing the possibility of tuning the mechanical performance by controlling the diffusion, which could be beneficial for the design and lifetime prediction of degradable implants.

Strain rate effects on fracture toughness of polymer nanocomposites: A multiscale study

Effect of Nonaffine Displacement on the Mechanical Performance of Degraded PCL and Its Graphene Composites: an Atomistic Investigation

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Tensile Performance of Polymer Nanocomposites with Randomly Dispersed Carbon Nanothreads

Influence of Inter-tube Connections on the Stress-Strain Behavior of Nanotube-Polymer Composites: Molecular Dynamics

Unraveling the Effect of Strain Rate and Temperature on the Heterogeneous Mechanical Behavior of Polymer Nanocomposites via Atomistic Simulations and Continuum Models

Influence of strain rate on nanoparticle debonding in polymer nanocomposites

Modeling the Rate-Dependent Ductile-Brittle Transition in Amorphous Polymers

Development of multiscale analysis method for predicting thermo-mechanical properties of polymeric nanocomposites containing clustered nanoparticles

Review of Strain Rate Effects of Fiber-Reinforced Polymer Composites

Mechanism-Based Modeling of Strain Rate–Dependent Transition of Macromechanical Behavior Accompanied by Temperature Rise Effects of a Toughened Polymer Composite

A numerical multi-scale method for analyzing the rate-dependent and inelastic response of short fiber reinforced polymers: Modeling framework and experimental validation

Nonmonotonic fracture behavior of polymer nanocomposites

FRACTURE SIMULATION IN POLYMER NANOCOMPOSITES USING MOLECULAR DYNAMICS

Understanding process-structure-property relation for elastoplastic behavior of polymer nanocomposites with agglomeration anomalies and gradient interphase percolation

A Method for Plotting Failure Envelopes of Unidirectional Polymer Composite Materials under Different Strain Rates

Key Parameters for Fracture Toughness of Particle/Polymer Nanocomposites; Sensitivity Analysis via XFEM Modeling Approach

Size Effect and Scaling in Quasi-static and Fatigue Fracture of Graphene Polymer Nanocomposites

A multiscale modeling framework for predicting strain‐dependent electrical conductivity of carbon nanotube‐incorporated nanocomposites considering the electron tunneling effect

Investigation of strain rate dependent microscopic failure mechanisms in short fiber reinforced plastics using finite element simulations

Fiber Orientation and Strain Rate-Dependent Tensile and Compressive Behavior of Injection Molded Polyamide-6 Reinforced with 20% Short Carbon Fiber