Abstract:Addressing the practical challenges of difficult drilling for blasting-induced permeability enhancement in deep, soft, and high-gas coal seams, where fractures remain underdeveloped and prone to re-compaction, this study proposes blasting operations within the floor strata. This approach aims to enhance the permeability of soft coal seams, thereby extending the duration of effective gas extraction. A bidirectional loading gas–solid coupling blasting simulation system was established in the laboratory, enabling multi-faceted analysis of experimental models through macroscopic crack patterns, internal damage mechanisms, and strain data of coal and rock masses. Comparative experiments were conducted, contrasting various control hole spacings with conventional blasting techniques. The findings reveal that as the blasting stress wave traverses the control hole walls, tensile stress waves are reflected, facilitating crack propagation. The guiding effect of the control holes and the spatial compensation they provide significantly increase the extension distance of explosion-induced cracks, resulting in directional failure of the test specimens and heightened damage in the far field of the blast. After the blasting process, the arrangement of control holes can result in an increase of up to 133% in damage to the coal seam and a reduction of up to 167% in damage to the floorboard compared to the model without control holes. Notably, when the control holes are proximal to the coal-rock interface, the near-end coal body experiences the most pronounced effects, with peak damage and tensile strain in the d = 20 mm model being 1.93 and 1.79 times higher, respectively, than those in models without control holes. Conversely, for control holes located further from the interface, the distal coal body experiences the greatest influence, exhibiting 1.53 and 1.55 times higher peak damage and tensile strain, respectively, in the d = 80 mm model compared to uncontrolled counterparts. Field observations at the C13 coal seam of a mine within the Huainan mining area corroborate these findings, where the volume of gas extraction and its concentration experienced a rapid increase following blasting and penetration enhancement. Optimum permeability enhancement occurs when the blasting hole is situated 4 m from the extraction point, resulting in a 131% increase in gas extraction purity from 0.15 × 10 –3 m 3 /min to 1.97 × 10 –3 m 3 /min. Furthermore, gas concentration soars by 373%, from 5.86% to 21.86%. These research outcomes offer valuable insights and hold considerable reference significance for blasting-induced permeability enhancement in deep, soft, and high gas coal seams.

Theoretical Basis and Technical Method of Permeability Enhancement of Tectonic Coal Seam by High Intensity Acoustic Wave In Situ

Research on enhanced permeability technology of coal seam based on controlled shock wave

Theoretical analysis and engineering application of controllable shock wave technology for enhancing coalbed methane in soft and low-permeability coal seams

Study on the technology of permeability enhancement of deep hole pre-splitting blasting in a low-permeability coal seam

Study on anti-reflection of deep soft and high gas coal seam floor by deep hole controlled blasting

Modelling of enhanced gas extraction in low permeability coal seam by controllable shock wave fracturing

Research on controllable shock wave technology for in-situ development of tar-rich coal

Coal breakage impact by high-pressure water jet and induced pressure relief and permeability enhancement by hydraulic flushing cavity: mechanism and application

Preliminary Tests of Coal Reservoir Permeability Enhancement by Controllable Shock Waves in Baode Coal Mine 8# Coal Seam

Static expansion fracturing mechanism for enhancing gas permeability in low permeability coal seams

Analytical solution and evolution process of gas permeability coefficient on typical hard-soft composite coal seam

Stress Relief and Permeability Enhancement with Hydraulic Fracturing in Overlying Key Strata of Deep and Soft Coal Seams

Pulsating hydraulic fracturing technology in low permeability coal seams

Comprehensive Gas Prevention and Control Technique for Mining the First Seam in Short-Distance Outburst Coal Seam Groups

Increasing Permeability of Coal Seam and Improving Gas Drainage Using a Liquid Carbon Dioxide Phase Transition Explosive Technology

Experimental Research on Permeability of Coal and Rock Mass Considering Postpeak Failure

Research on the Coal Seam Permeability-Increasing Technology via High-Pressure Water Jet Reaming and Its Application

Exploration and application of microbial method to enhance the effect of hydraulic fracturing on coal seam permeability enhancement and gas extraction

Permeability enhancement of deep hole pre-splitting blasting in the low permeability coal seam of the Nanting coal mine

Application of integrated drilling and stamping technology in gas extraction through layer drilling

Experiment and Discovery on Permeability Improved Technology of Coal Reservoir Based on Repeated Strong Pulse Waves of High Energy Accumulation