Abstract:This article presents a computational reliability analysis of reinforced soil-retaining structures (RSRS) under seismic conditions. The internal stability of RSRS is evaluated using the horizontal slice method (HSM) with modified pseudo-dynamic seismic forces. Two different failure modes of RSRS are identified and their reliability indices are computed using the first-order reliability method (FORM). The critical probabilistic failure surface is identified using a three-tier optimization scheme. Reliability index of the system is computed by considering the modes of failure to be connected in series. The tension mode is found to be the most critical mode of failure. The present study identifies that the wall height (H), shear wave velocity of the soil (Vs), and predominant frequency of the input motion (ω) govern the response of RSRS. Reliability indices depend on a parameter termed as the normalized frequency (ωH/Vs) and their values decrease with an increase in the value of ωH/Vs. Increase in the damping ratio of soil, increases the value of reliability indices, especially for ωH/Vs values, which are close to π/2. The FORM suffers from few critical shortcomings such as linear assumption of limit state surface at the most probable point of failure and its ability to consider only the statistical uncertainties excluding the effect of epistemic uncertainties. This calls for sampling-based numerical techniques such as Monte-Carlo simulation (MCS) which gives more comprehensive understanding of the problem under consideration in a probabilistic framework. Thus, a computationally efficient surrogate-assisted MCS is carried out to validate the present formulation and provide numerical insights by capturing the system dynamics over the entire design domain. Adoption of the efficient surrogate-assisted approach allowed us to quantify the epistemic uncertainty associated with the system using Gaussian white noise (GWN). Subsequently, its effects on the system reliability index and probabilistic behavior of the critical parameters are presented. The numerical results clearly indicate that it is imperative to take into account the probabilistic deviations of the critical performance parameters for RSRS to ensure adequate safety and serviceability under operational condition while quantifying the reliability of such systems.

Reliability analysis for running safety of vehicle on slab track via an improved second-order fourth-moment approach

Probabilistic Analysis of Underground Rock Excavations Using Response Surface Method and SORM

Approximate Analytical Solutions of Reliability for Controlled Single First-Integral Nonlinear Stochastic Systems

Reliability Analysis of Ground–support Interaction in Circular Tunnels Using the Response Surface Method

Reliability analysis of CRTS II track slab considering multiple failure modes

A hybrid method for service reliability assessment of slab track subject to change of structural stiffness and damping

Moving Least Squares Method for Reliability Assessment of Rock Tunnel Excavation Considering Ground-Support Interaction

Reliability analysis of progressive failure of strain softening slope

Response surface method based on LS-SVM for structural reliability analysis

Conditional time-dependent limit state function model considering damages and its application in reliability evaluation of CRTS II track slab

Dynamic Responses of Vehicle-CRTS III Slab Track System and Vehicle Running Safety Subjected to Uniform Seismic Excitation

Dynamic Analysis of a Slab Track on the Poroelastic Soil Subjected to Moving Loads

Efficient computational system reliability analysis of reinforced soil-retaining structures under seismic conditions including the effect of simulated noise

Influence of Vibration Isolator Failure on Vehicle Operation Performance and Floating Slab Track Structure Vibration Reduction Effectiveness

Reliability Analysis of Seismic Slope Incorporating Interactions among Multiple Sliding Blocks Using Imbalance Thrust Force Method in Primary Sliding Direction

Assessment of various seismic fragility analysis approaches for structures excited by non-stationary stochastic ground motions

Direct Method-Based Probabilistic Structural Integrity Assessment for High-Temperature Components Considering Uncertain Load Conditions

Seismic collaborative reliability analysis for a slope considering spatial variability base on optimized subset simulation

Reliability analysis of slopes considering spatial variability of soil properties based on efficiently identified representative slip surfaces

Probabilistic Based Reliability Slope Stability Analysis Using FOSM, FORM, and MCS

Seismic Reliability Analysis of Steel Frame Structures Based on Uniform Design Response Surface Method