Abstract:Engineering the electrocatalyst's nanostructure is key-factor in constructing a high-performance electrochemical sensor. The MXene vanadium carbide (V 8 C 7 Tx; VC) nanosheets encapsulating graphitic carbon nanosheets nanocomposite (VC/g-CN NSs NC) as an effective electrocatalyst for detecting clioquinol (CQL) is reported here. The interconnected VC and g-CN nanosheets form a very effective conductive network. The high concentration of O-terminated functional groups in the oxidized VC and the abundant surface area of g-CN contribute to the enhanced electrocatalytic effectiveness of the nanocomposite. The synergistic interaction between the VC NSs and g-CN NSs creates a nanocomposite ideal for CQL detection because it offers many active sites with a fast electron transfer rate. A lower oxidation potential and higher peak current responsiveness distinguish the proposed drug sensor from previously described CQL sensors. Under optimal conditions, the constructed sensors showed strong analytical performance, as shown by a low detection limit of 2.2 nM, high sensitivity of 15.6 μA μM −1 cm −2 , a broad linear range of 0.3–220 μM, and significant recovery outcomes in the analysis of real samples. Thus, the VC/g-CN NSs NC material has promise for use in high-performance electrochemical applications. Graphical Download : Download high-res image (189KB) Download : Download full-size image To ensure food safety and quality, the development of rapid detection of mycotoxins using sensitive and accurate methods is essential. Zearalenone is one of the mycotoxins found in cereals, and its toxicity poses a serious risk to humans. For this concern, a simple ceria silver co doped zinc oxide (Ce-Ag/ZnO) catalyst was prepared by coprecipitation approach. The physical properties of the catalyst were characterized by XRD, FTIR, XPS, FESEM, and TEM. The Ce-Ag/ZnO catalyst was used as an electrode material for the detection of ZEN in food samples due to its synergistic effect and high catalytic activity. The sensor exhibits good catalytic performance with a detection limit of 0.26 μg/mL. Moreover, the efficiency of the prepared sensor was confirmed by selectivity in interference studies and real-time analysis in food samples. Our research is an essential technique for using trimetallic heterostructures to study the construction of sensors. The environmental toxicity of sulfa drugs has attracted significant attention worldwide. Herein, we constructed a carbon-decorated BiPO 4 rod-modified glassy carbon electrode (GCE) for electrochemical detection of sulfamethazine (SMZ). The composite was prepared based on carbon black (CB) and BiPO 4 rods by a simple, greener, nontoxic, and cost-effective ultrasonication method. The physicochemical and electrochemical properties of CB/BiPO 4 composite has characterized using different physicochemical and electrochemical techniques. The developed CB/BiPO 4 composites modified GCE exhibited effective electrochemical active surface area and fast electron transfer rate towards SMZ determination. The developed sensor found wide linear ranges, low limit of detection (LOD), excellent sensitivity, and selectivity. Additionally, the developed sensor successfully analyzed the practical applicability with satisfactory outcomes. Therefore, the present report demonstrates the cheap and cost-effective platform for hazardous SMZ determination. Generally, the nanoparticle along with the nanosheet architecture has excellent physiochemical properties at the interface of electrode and electrolyte. In this work, the SrFe 2 O 4 nanorod was prepared through the simple hydrothermal method, as well as the S-GCN prepared (urea + thiourea) by thermal polymerization, and using the solvent evaporation process SrFe 2 O 4 nanorod was decorated on the S-GCN nanosheet, which is used for the electrochemical detection of flufenamic acid (FFA). The electrocatalytic activity of the bare GCE was enhanced by the SrFe 2 O 4 /S-GCN because SrFe 2 O 4 has more active sides and S-GCN has a large surface area which is confirmed by the EIS and CV analysis. Moreover, the synergistic effect between SrFe 2 O 4 nanorods and the S-GCN nanosheet provides the fast electron transfer property and enhanced electrocatalytic activity towards the FFA. Our proposed sensor exposed the lower level of the detection limit of 0.004 μM and the linear range of 0.01–384 μM with the LOQ of 0.015 μM. Furthermor -Abstract Truncated-

Boosted electrocatalytic activity of in situ oxidized and surface covered crednerite CuMnO 2 /carbon nanofibers nanocomposite for ornidazole sensor

Praseodymium Vanadate-Decorated Sulfur-Doped Carbon Nitride Hybrid Nanocomposite: The Role of a Synergistic Electrocatalyst for the Detection of Metronidazole

A novel hybrid construction of MnMoO4 nanorods anchored graphene nanosheets; an efficient electrocatalyst for the picomolar detection of ecological pollutant ornidazole in water and urine samples

Ultrasensitive detection of ornidazole–antibiotic drug residues in water using NiMOFs functionalized MWCNT modified electrode

Efficient Amperometric Detection of Ornidazole: An Antibiotic Drug Based on Rare-Earth Metal Oxide Entrapped with Graphene Nanosheets Nanocomposite

Proton conductive 2D MXene-derived potassium titanate nanoribbons fabricated electrochemical platform for trace detection of enrofloxacin

In-situ preparation of CuO nanoparticles decorated In2O3 pn heterojunction composite for the photoelectrochemical detection of ornidazole

Hydrothermal synthesis of cobalt germanium oxide supported with carbon-based graphitic carbon nitride for electrochemical determination of ornidazole

Oxygen-terminated vanadium carbide with graphitic carbon nitride nanosheets modified electrode: A robust electrochemical platform for the sensitive detection of antibiotic drug clioquinol

3D architectured zinc–chromium layered double hydroxide with nickel cobalt sulfide composite for the electrochemical detection of ronidazole

A New Approach to Electrochemical Sensing of a Wildly Used Antibiotic; Ciprofloxacin

Bi2MoO6/MWCNTs-COOH/GCE electrochemical probe for ultrasensitively and selectively detecting antibiotic norfloxacin

Electrochemical Detection of Metronidazole by the Fabricated Composites of Orthorhombic Iron Tungsten Oxide Decorated with Carbon Nanofiber Composites Electrode

Co3O4 nanoparticles/graphitic carbon nitride heterojunction for photoelectrochemical aptasensor of oxytetracycline

Ni/MoN nanoparticles embedded with mesoporous carbon as a high-efficiency electrocatalyst for detection of nitroimidazole antibiotics

Nanocomposites of Zr(IV)-Based Metal–Organic Frameworks and Reduced Graphene Oxide for Electrochemically Sensing Ciprofloxacin in Water

Construction of Nickel Tungsten Oxide Anchored Carbon Nanofibers Modified with Glassy Carbon Electrode for Enhanced Electrochemical Detection of Metronidazole in Urine and Environmental Water Sample

In situ fabrication of copper oxide nanoparticles decorated carbon cloth for efficient electrocatalytic detection of nitrite

Copper Oxide Anchored Carbon Nanofibers: A Versatile Platform for Multiplex Detection of Antibiotics, Heavy Metals and Pesticides

Signal Amplification for Detection of Nilutamide in Three-Dimensional Electrochemical Sensor Using Copper Metal–Organic Framework Decorated Carbon Nanofibers

Facile Synthesis of Reduced Graphene Oxide‐octahedral Mn 3 O 4 Nanocomposites as a Platform for the Electrochemical Determination of Metronidazole and Sulfamonomethoxine