Abstract:The cost and durability of the electro-catalysts used in the proton exchange membrane fuel cells (PEMFCs) are two critical factors affecting the early market penetration for both transportation and stationary applications. Although progress has been made in the rational designs of highly active ORR electro-catalysts with excellent performance characterized by rotating disc electrode (RDE), [1, 2] there still remains a huge challenge to implement these RDE findings into an actual membrane electrode assembly (MEA) for PEMFC systems. Because the ORR performance is largely influenced by the ionomer/catalyst interface within the catalyst layers of a MEA, the “ideal” interface should contain 100% ionomer coverage for maximizing catalyst utilization. In addition, the thickness of ionomer film over the catalyst nanoparticles should be optimal to facilitate gas diffusion and water balance without sacrificing its protonic conductivity. Additionally, the appropriate pore structure in the catalyst layer is also necessary for providing transport paths for both reactants (O2 and H2) to reach reaction sites as well as allow water mobility throughout the catalyst layer. In some of the more conventional MEA fabrication processes, the ionomer coverage of the catalyst particles can be partial or non-uniform. This is partly due to the lack of control of ionomer deposition onto the catalyst surface. As a consequence, some of the catalyst becomes electrochemically inactive. Furthermore, insufficient ionomer coverage suppresses the amount of H+ transport, thus impacting the oxygen reduction reaction (ORR). On the other hand, the aggregation of ionomer with increasing ionomer content (to increase catalyst coverage) in a catalyst layer leads to a thicker ionomer film, which results in an increased gas and water diffusional barrier. We will present a novel approach to construct an innovative ionomer/catalyst interface with high ionomer coverage and a thin ionomer layer. This is done by an electrostatic charge attraction of a negatively charged “-SO3 -” on the surface of ionomer particles and a positively charged “-NH3 +” on the surface of catalyst particles (catalyst surface charge is realized by chemically grafting different functional groups via diazonium reaction). In our approach, the improved ionomer/catalyst interface is formed during the ink preparation. Using a unique method of combined ultra-small angle x-ray scattering (USAXS) and cryo-TEM, we observed a significant increase on carbon aggregate size after the NH3 +- functionalized carbon black (CB) particles were mixed with Nafion ionomer, whereas only a negligible size change was observed when SO3 - functionalized CB was used. These results suggest that the coulombic attraction facilitates the mixing of catalyst and ionomer. The ionomer/catalyst interface was characterized by Scanning Transmission Electron Microscopy (STEM) combined with Energy-dispersive X-ray Spectroscopy (EDS) mapping. Figure 1(b) shows the EDS mapping of F distribution for both NH3 +-CB and SO3 --CB. We will report on the performance of MEAs using this approach. Reference [1] C. Chen, Y. Kang, Z. Huo, Z. Zhu, W. Huang, H.L. Xin, J.D. Snyder, D. Li, J.A. Herron, M. Mavrikakis, M. Chi, K.L. More, Y. Li, N.M. Markovic, G.A. Somorjai, P. Yang, V.R. Stamenkovic, Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces, Science, 343 (2014) 1339-1343. [2] X. Huang, Z. Zhao, L. Cao, Y. Chen, E. Zhu, Z. Lin, M. Li, A. Yan, A. Zettl, Y.M. Wang, X. Duan, T. Mueller, Y. Huang, High-performance transition metal–doped Pt3Ni octahedra for oxygen reduction reaction, Science, 348 (2015) 1230-1234. Figure 1

Synthesis of Au-Nanoparticles on Carbon using Lysine as a Capping Agency in a Gas Diffusion Electrodes Cell for Electrocatalytic CO2 Reduction

Size Controllable Metal Nanoparticles Anchored on Nitrogen Doped Carbon for Electrocatalytic Energy Conversion

Polyethylenimine‐assisted Synthesis of Au Nanoparticles for Efficient Syngas Production

Tunable Synthesis of Hollow Metal-Nitrogen-Carbon Capsules for Efficient Oxygen Reduction Catalysis in Proton Exchange Membrane Fuel Cells.

Amine-Functionalized Metal-Free Nanocarbon to Boost Selective CO2 Electroreduction to CO in a Flow Cell.

A general route via formamide condensation to prepare atomically dispersed metal–nitrogen–carbon electrocatalysts for energy technologies

Monodisperse Au Nanoparticles for Selective Electrocatalytic Reduction of Co2 to Co

Thiol-Assisted Synthesis of Carbon-Supported Metal Nanoparticles for Efficient Electrocatalytic CO2 Reduction.

In Situ Construction of Ir@Pt/C Nanoparticles in the Cathode Layer of Membrane Electrode Assemblies with Ultra-Low Pt Loading and High Pt Exposure

Core–shell Nanoporous AuCu3@Au Monolithic Electrode for Efficient Electrochemical CO2 Reduction

Promoting the Electrochemical Performances by Chemical Depositing of Gold Nanoparticles Inside Pores of 3D Nitrogen-Doped Carbon Nanocages.

Sulfur-doped graphene anchoring of ultrafine Au25 nanoclusters for electrocatalysis

Efficient Electrocatalytic Nitrate Reduction Using 3D Copper Foam-Supported Co Hexagonal Nanoparticles in a Membrane Electrode Assembly

Thin-walled Hollow Au-Cu Nanostructures with High Efficiency in Electrochemical Reduction of CO2 to CO

Electrochemical Deposition of Silver Nanoparticle Assemblies on Carbon Ultramicroelectrode Arrays

Novel Catalyst-Layer Structures with Rationally Designed Catalyst/Ionomer Interfaces and Pore Structures Aided by Catalyst Functionalization

Enhancing CO2 Electroreduction with Au/Pyridine/Carbon Nanotubes Hybrid Structures.

Ag@Au Core-Shell Nanowires for Nearly 100 % CO2 -to-co Electroreduction.

Cu Nanoparticles Decorating N-Doped Erythrocyte-Shaped Carbon Nanostructures for Electrochemical CO 2 Reduction

Synergistic Electrocatalytic Nitrogen Reduction Enabled by Confinement of Nanosized Au Particles Onto a Two-Dimensional Ti3C2 Substrate.

Simultaneously Incorporating Atomically Dispersed Co‐Nx Sites with Graphitic Carbon Layer‐Wrapped Co9S8 Nanoparticles for Oxygen Reduction in Acidic Electrolyte