Abstract:Radiative cooling utilizes high solar reflectivity and high infrared emissivity to achieve temperature cooling down, which has attracted extensive research interest as a zero-energy consumption manner. However, the design of photonic structures and metamaterials for radiative cooling do not exploit commercialization prospects due to high production costs and structural complexity. Here we propose an economical and scalable electrospinning method for fabricating high-performance sun-shading and radiative cooling composite flexible film. The composite film is a non-woven fabric of nanofibers with polymethyl methacrylate (PMMA) and aluminum oxide (Al2O3) nanoparticles. The diameter of the nanofibers distributes in the range of 300-1200 nm and Al2O3 nanoparticles are wrapped in the nanofibers. The nanofibers strongly scatter sunlight to enable high solar reflectivity and back-reflection layer is no more necessary. Molecular vibrations of PMMA and phonon polarization resonance of Al2O3 nanoparticles synergistically result in high infrared emissivity. At a thickness of 0.30 mm and with an Al2O3 content of 8%, this material exhibits exceptional solar reflectance levels of approximately 95% between wavelengths of 1.1-2.5 mu m. Additionally, it demonstrates an extremely low rate of solar absorption of approximately 5.5% between wavelengths of 0.3-1.1 mu m, distinguishing itself as a highly effective solar selective surface even without the inclusion of a back-reflective layer. Furthermore, the material exhibits ultrahigh infrared emissivity levels of approximately 0.98 within atmospheric windows ranging from 8 to 13 mu m. These remarkable characteristics position this material as a highly promising candidate for use in solar thermal energy conversion systems. As a result, the device shows a cooling performance that reaches a temperature decrease of up to 4.3 degrees C under 1000 W/m2 peak solar intensity and a decrease of 5.9 degrees C during nighttime. The composite film has enormous potential for use in vehicle shading and personal thermal management. Moreover, its mechanical properties allow for the flexibility needed to meet the demands of everyday use. Our work provides a straightforward and scalable method to manufacture products with exceptional sun shading and radiative cooling capabilities.

Dual-functional reduced graphene oxide decorated nanoporous polytetrafluoroethylene metafabrics for radiative cooling and solar-heating

Janus Membrane with Oriented Fiber Structure for Boosted Personal Wet-Thermal Management

Designing Textile Architectures for High Energy-Efficiency Human Body Sweat- and Cooling-Management

Hierarchical Porous Dual-mode Thermal Management Fabrics Achieved by Regulating Solar and Body Radiations

Scalable Fabrication of Dual-Function Fabric for Zero-Energy Thermal Environmental Management Through Multiband, Synergistic, and Asymmetric Optical Modulations.

Flexible Al2O3/polymethyl Methacrylate Composite Nanofibers for High-Performance Sun Shading and Radiative Cooling

Flexible Al 2 O 3 /Polymethyl Methacrylate Composite Nanofibers for High-performance Sun Shading and Radiative Cooling

Dynamically Tunable Subambient Daytime Radiative Cooling Metafabric with Janus Wettability

Scalable, Waterproof, Breathable, and Flexible Polyolefin-Elastomer/Polyethylene Glycol@Zinc Oxide Microfibrous Fabrics for Daytime Radiative Cooling Clothing

An Ultra-Thin Colored Textile with Simultaneous Solar and Passive Heating Abilities

Hierarchical-morphology metafabric for scalable passive daytime radiative cooling

Dual-asymmetrically selective interfaces-enhanced poly(lactic acid)-based nanofabric with sweat management and switchable radiative cooling and thermal insulation

Colored Woven Cloth-Based Textile for Passive Radiative Heating

Scalable Bio-Skin-Inspired Radiative Cooling Metafabric for Breaking Trade-Off between Optical Properties and Application Requirements

Nanosphere-structured hierarchically porous PVDF-HFP fabric for passive daytime radiative cooling via one-step water vapor-induced phase separation

Rational Design and Fine Fabrication of Passive Daytime Radiative Cooling Textiles Integrate Antibacterial, UV-Shielding, and Self-Cleaning Characteristics

Core-Shell Composite Nanofibers with High Temperature Resistance, Hydrophobicity and Breathability for Efficient Daytime Passive Radiative Cooling

Making Passive Daytime Radiative Cooling Metafabrics on a Large Scale

Bioinspired Metafabric with Dual‐Gradient Janus Design for Personal Radiative and Evaporative Cooling

Radiative cooling face mask based on mixed micro- and nanofibrous fabric