Abstract:This research introduces an entropy‐tuned and dual‐site substitution strategy to overcome challenges in P2‐type Na0.67Ni0.33Mn0.67O2 cathodes for sodium‐ion battery. The tailored [Na0.67Zn0.05]Ni0.22Cu0.06Mn0.66Ti0.01O2 cathodes, strategically incorporating Zn ions, disrupt Na/vacancy ordering, fortifying the layered structure. More importantly, combining a series of in/ex situ experimental measurements and theoretical calculations, the energy storage mechanism and the reason for the excellent performance are unveiled. The P2‐type layered transition metal oxide cathodes confront formidable challenges, including irreversible deleterious phase transitions, transition metals migration, and sluggish Na+ diffusion kinetics, which hamper their rapid commercial application in sodium ion batteries (SIB). In this work, an entropy tuning with dual‐site substitution strategy is proposed to address the aforementioned issues. In the tailored [Na0.67Zn0.05]Ni0.22Cu0.06Mn0.66Ti0.01O2 (NZNCMTO) cathodes, the strategic incorporation of Zn ions serves to occupy Na sites, intentionally disrupting the Na/vacancy ordering and establishing a reinforcing "pillar" effect within the layered framework. Furthermore, the substitution of Cu and Ti for Ni and Mn bolsters covalent bonding with the lattice oxygen, thereby impeding the migration of the transition metal ions and leading to a near‐zero strain structural evolution during charge and discharge process. Density functional theory calculations confirmed that entropy‐tuned NZNCMTO substantially lowered the migration energy barrier for Na+ ions diffusion and improved electronic conductivity. Consequently, the NZNCMTO cathode exhibits an impressive high practical capacity of 91.54 mAh g−1 at a high discharge rate of 10 C, along with outstanding cycling stability, maintaining near 100% capacity retention over 500 cycles at a current density of 10 C. This work presents an innovative blueprint for designing high‐performance sodium‐ion battery cathode materials.

Suppressing the P2–OP4 phase transition of single-crystal P2-type Ni/Zn/Mn-based layered oxide for advanced sodium-ion batteries

Suppressing the P2–O2 phase transition of P2-type Ni/Mn-based layered oxide by synergistic effect of Zn/Ti co-doping for advanced sodium-ion batteries

Single-Crystal Growth of P2-Type Layered Oxides with Increased Exposure of {010} Planes for High-Performance Sodium-Ion Batteries

Multi-element doped hexagonal sheet Ni/Mn-based layered oxide with ZrO2 surface modification for sodium ion batteries cathode with high capacity and good cycle/air stability

Suppressing the P2‐O2 phase transition and Na+/vacancy ordering in Na0.67Ni0.33Mn0.67O2 by a delicate multicomponent modulation strategy

K/Zn dual-site doping toward ultralow-strain P2-type Ni/Mn-based cathode materials for sodium-ion batteries

Structural Regulation of P2‐Type Layered Oxide with Anion/Cation Codoping Strategy for Sodium‐Ion Batteries

P2/O3 biphasic Ni/Fe/Mn-based layered cathode with high capacity and great cyclability for sodium-ion batteries

Phase Engineering of Ni-Mn Binary Layered Oxide Cathodes for Sodium-Ion Batteries

Ca/Li Synergetic‐Doped Na0.67Ni0.33Mn0.67O2 to Realize P2‐O2 Phase Transition Suppression for High‐Performance Sodium‐Ion Batteries

Entropy Tuning Stabilizing P2‐Type Layered Cathodes for Sodium‐Ion Batteries

Highly-stable P2–Na0.67MnO2 Electrode Enabled by Lattice Tailoring and Surface Engineering

Precisely Modulating the Structural Stability and Redox Potential of Sodium Layered Cathodes Through the Synergetic Effect of Co-Doping Strategy

Increasing (010) active plane of P2-type layered cathodes with hexagonal prism towards improved sodium-storage

Sodium‐Rich, Co‐Ni‐Free P2‐Layered Manganese Oxide Cathodes for Sodium‐Ion Batteries

Engineering Na+-layer spacings to stabilize Mn-based layered cathodes for sodium-ion batteries

Impurity-vibrational entropy enables quasi-zero-strain layered oxide cathodes for high-voltage sodium-ion batteries

Advanced P2-Na2/3Ni1/3Mn7/12Fe1/12O2 Cathode Material with Suppressed P2-O2 Phase Transition toward High-Performance Sodium-Ion Battery.

Semiconductor Material ZnO-Coated P2-Type Na2/3Ni1/3Mn2/3O2 Cathode Materials for Sodium-Ion Batteries with Superior Electrochemical Performance

Suppressing the Irreversible Phase Transition in Sodium Layered Cathode Via Integrating P2 and O3-Type Structures

A two-pronged approach:Bulk-phase substitution and second-phase synergism to enhance the anion redox stability of layered oxide cathode for sodium-ion batteries