Abstract:Currently, carbon-based catalysts integrated with macroporous catalytic membrane have aroused considerable attention for environmental remediation because of its practicability and high efficiency. Herein, nitrogen doped carbon nanotube hybrids (Fe-Co@NC-CNTs) decorated with multiple active species (Fe3Co7/CoFe2O4@Fe/CoNC) were designed through N-molecule assisted pyrolysis of bimetallic (Fe/Co) metal-organic frameworks, and then immobilized on poly(vinylidene fluoride) (PVDF) membrane to construct macroporous Fe-Co@NC-CNTs/PVDF catalytic membrane via directional freezing technique, where active sites were efficiently exposed for oxidants and target pollutants. As expected, Fe-Co@NC-CNTs/PVDF membrane successfully achieved almost 100% bisphenol A (BPA) degradation after 40 min via PMS activation, which was significantly overperformed the majority of conventional carbon-based catalysts. Besides, we found that Fe-Co@NC-CNTs/PVDF membrane not only exhibited ideal catalytic and self-cleaning property in humic acid (HA)-BPA coexistence system, but also maintained the excellent reusability and ultrahigh water flux (10464.45 L m-2 h-1) even after 5 cycles. Notably, in EPR analysis and quenching experiments, it was found that sulfate radicals (SO4·- and ·OH) and singlet oxygen (1O2) participated the degradation process while 1O2 made a major contribution. More significantly, this study is very meaningful for the development of novel catalytic self-cleaning membranes with PMS activation.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop an efficient catalytic self - cleaning membrane for the degradation of bisphenol A (BPA) in water through peroxymonosulfate (PMS) activation. Specifically, the research aims to: 1. **Design and preparation of new catalysts**: Prepare nitrogen - doped carbon nanotube composites (Fe - Co@NC - CNTs) with multiple active species (Fe₃Co₇/CoFe₂O₄@Fe/Co - N - C) by nitrogen - molecule - assisted pyrolysis of bimetallic (Fe/Co) metal - organic frameworks (MOFs). 2. **Construction of porous catalytic membranes**: Fix the above - mentioned catalysts on a polyvinylidene fluoride (PVDF) membrane and construct a porous Fe - Co@NC - CNTs/PVDF catalytic membrane by directional freezing technology to improve the contact efficiency between the oxidant and the target pollutant. 3. **Verification of catalytic performance and self - cleaning ability**: Evaluate the catalytic performance of the prepared catalytic membrane in practical applications, especially the catalytic self - cleaning performance in the humic acid (HA) - BPA co - existing system, and investigate its reusability and high - flux water treatment ability. 4. **Exploration of degradation mechanisms**: Determine the main active substances involved in the degradation process, such as sulfate radical (SO₄⁻· and ·OH) and singlet oxygen (¹O₂), through electron paramagnetic resonance (EPR) analysis and quenching experiments, and explore their main contributors. ### Main research contents and innovation points - **High - efficiency degradation of BPA**: The experimental results show that the Fe - Co@NC - CNTs/PVDF membrane almost completely degrades BPA within 40 minutes, which is significantly better than traditional carbon - based catalysts. - **Excellent self - cleaning performance**: This catalytic membrane not only shows ideal catalytic and self - cleaning performance in the HA - BPA co - existing system, but also maintains a very high water flux (10464.45 L m⁻² h⁻¹) after 5 cycles. - **Synergistic effect of multiple active species**: Research shows that the synergistic effect between N - doped CNTs and multiple active species significantly improves the catalytic activity, especially singlet oxygen (¹O₂) plays an important role in the degradation process. - **Environmental application prospects**: This research provides new ideas for the development of new catalytic self - cleaning membranes, especially suitable for the field of environmental catalysis, and has important practical application value. ### Formula summary - **Water flux formula**: \[ J=\frac{V}{A\cdot t} \] where \(J\) is the water flux (L m⁻² h⁻¹), \(V\) is the filtration volume (L), \(A\) is the membrane area (m²), and \(t\) is the time (h). - **Arrhenius equation**: \[ k = A e^{-\frac{E_a}{RT}} \] where \(k\) is the reaction rate constant, \(A\) is the pre - exponential factor, \(E_a\) is the activation energy (kJ/mol), \(R\) is the gas constant (8.314 J mol⁻¹ K⁻¹), and \(T\) is the absolute temperature (K). Through these studies, the authors demonstrate the great potential of the Fe - Co@NC - CNTs/PVDF catalytic membrane in water treatment, especially its high - efficiency degradation and self - cleaning performance under complex environmental conditions.

Investigation of catalytic self-cleaning process of multiple active species decorated macroporous PVDF membranes through peroxymonosulfate activation

Preparation of Catalytic Ceramic Nanofiber Membranes with MnFe Dual-Active Sites Enhancing Catalytic Ozonation of Sulfamethoxazole

Synergistic multiple active species for catalytic self-cleaning membrane degradation of persistent pollutants by activating peroxymonosulfate

Tannic Acid-Mediated Layered Double Hydroxide Hybridizing PVDF Superwetting Catalytic Membranes Constructed Via Ion Diffusion-Induced Interfacial Self-Assembly for Boosting Water Purification

MOFs derived 3D sea urchin-like carbon frameworks loaded on PVDF membranes as PMS activator for highly efficient bisphenol A degradation

Cobalt-ferrite functionalized graphitic carbon nitride (CoFe2O4@g-C3N4) nanoconfined catalytic membrane for efficient water purification: Performance and mechanism

Nanoconfined catalytic membrane assembled by nitrogen-doped carbon encapsulating Fe-based nanoparticles for rapid removal of 2,4-dichlorophenol in wastewater by peroxymonosulfate activation

Catalytic membrane with multiscale iron-based catalysts anchored on 2D/2D hybrid g-C 3 N 4 /layered clay for pollutant removal

Single-Atom Cobalt-Modified Catalytic Membrane for Pollutant Degradation with High Tolerance of Environmental Interferences

Highly efficient activation of peroxymonosulfate by novel CuO-Chrysotile catalytic membrane for degradation of p-nitrophenol

Coal-based catalytic carbon membrane functionalized with nitrogen-doped carbon nanospheres for efficient bisphenol A removal

Nanoconfined membranes assembled by the ultrathin LDH and MoS 2 nanosheets enable fast and stable water decontamination

Catalytic membranes assembled by Co-Fe Prussian Blue analogues functionalized graphene oxide nanosheets for rapid removal of contaminants

Fe3O4/PVDF catalytic membrane treatment organic wastewater with simultaneously improved permeability, catalytic property and anti-fouling

Catalytic ceramic membrane integrated with granular activated carbon for efficient removal of organic pollutants

Development of CuCo 2 O 4 integrated ceramic membrane for peroxymonosulfate activation: An efficient oxidation process for bisphenol A degradation

Self-cleaning catalytic membrane for water treatment via an integration of Heterogeneous Fenton and membrane process

Nanoarchitectonics of CuO/α-Fe2O3/BiVO4 Photocatalysts with Double Heterojunctions on PVDF Membranes: Investigating Sulfadiazine Removal and Antifouling Properties

A novel integrated process of ceramic membrane filtration coupled with peroxymonosulfate activation and adsorption for water treatment

Selective and ultrafast oxidation of multiple pollutants by biomorphic diatomite-based catalyst and stable catalytic Fenton-like membrane: Degradation behavior and mechanism analysis

CoAl-Layered Double Hydroxide Catalytic Membrane for Activation of Peroxymonosulfate Towards Efficient Degradation of Organic Pollutants