Abstract:This paper presents a flexible actuator with variable stiffness and its associated decoupling control algorithm. The elastic cell consists of two opposite-handed torsion springs and two cam-bearing followers (CBFs). Stiffness regulation is realized by changing the contact point position between the torsion spring and the CBFs. The CBFs are pulled via wire rope transmission and their movement direction is perpendicular to the torsion direction of the springs, thereby resulting in rolling friction. Such a design ensures a wide range of stiffness variations and small energy consumption for stiffness regulation, and contributes to a compact actuator design. Experimental results demonstrate that the proposed mechanism has good stiffness regulation and can reduce stiffness rapidly after collision. The dynamics of load side and motor side are controlled separately by a decoupling control algorithm based on the projection between the virtual torque and the commands of motor position and velocity. The virtual torque required to track the joint trajectory is calculated according to a hybrid proportional-derivative control algorithm, which incorporates a disturbance compensator composed of a smooth saturation function. The spring-damper model is successfully applied to the projection between the virtual torque, and the commands of motor position and velocity algorithm design. The feasibility of the designed actuator and the effectiveness of the control algorithm are demonstrated by trajectory-tracking control experiments under various operating conditions.

Design and analysis of a cable-driven rigid–flexible coupling parallel mechanism with variable stiffness

Study on the Position Solution and Workspace of the Flexible Coupling Parallel Robot with Three Degree of Freedom

Stiffness Analysis of Cable-Driven Parallel Mechanisms with Cables Having Large Sustainable Strains

Analysis on variable stiffness of a cable-driven parallel–series hybrid joint toward wheelchair-mounted robotic manipulator

Design and Modelling of a Cable-Driven Parallel-Series Hybrid Variable Stiffness Joint Mechanism for Robotics

Dynamic Modeling and Control of a Cable-Driven Parallel Mechanism with a Spring Spine

Design and Analysis of Variable Flexible Actuator for Human-Robot Interaction

Design and Kinematic Analysis of a Flexible-Link Parallel Mechanism With a Spatially Quasi-Translational End Effector

Stiffness Analysis for a Novel Parallel-Robot Based High-Precision Flexible Assembly Fixture

A parallel-guided compliant mechanism with variable stiffness based on layer jamming

A Flexure-Based 3-DOF Parallel Mechanism for Optical Fiber Assembly

Design and Analysis of a 3-DOF Planar Flexure-based Parallel Mechanism with Large Motion Range

Design of a compact long-stroke high-precision rigid-flexible coupling motion stage driven by linear motor

Design of a Reconfigurable Planar Parallel Continuum Manipulator with Variable Stiffness

Design and Analysis of a Large-Range Flexure-based Parallel Mechanism Based on Matrix Method.

Variable stiffness design of redundantly actuated planar rotational parallel mechanisms

Research on Stiffness Control of a Redundant Cable-Driven Parallel Mechanism

Flexible Actuator with Variable Stiffness and Its Decoupling Control Algorithm: Principle Prototype Design and Experimental Verification

Stiffness research on a high-precision, large-workspace parallel mechanism with compliant joints

A Variable Stiffness Robotic Arm Using Linearly Actuated Compliant Parallel Guided Mechanism

Stiffness Analysis of Spherical Parallel Mechanism 3-RRR with 3-DOF