An experimental insight into dynamic characteristics and wear of centrifugal pump handling multi-size particulate slurry
Yong Wang,Xiaolin Wang,Jie Chen,Gangxiang Li,Houlin Liu,Wei Xiong
DOI: https://doi.org/10.1016/j.engfailanal.2022.106303
IF: 4
2022-08-01
Engineering Failure Analysis
Abstract:The river water has a high sand content and the characteristics of mixed distribution of sand particles with different diameters. The effect of sand particles on the dynamic characteristics and wear of centrifugal pumps is an important issue when handling particulate slurry. The objective of this work is to establish the effect of flow rate and sand volume concentration variation on pump energy performance, outlet pressure pulsation, pump body vibration, and pump impeller wear. Experiments were conducted in a pilot plant test rig with five flow rates and three particle concentrations based on multi-size particulate slurry. It was observed that the head and efficiency of the centrifugal pump decrease with the increase of sand concentration, whereas the effect of small sand concentration on the energy performance of the pump is weak. The larger the flow rate of centrifugal pump, the lower the pressure pulsation and vibration intensity of pump body, but the more serious the impeller wear. When the sediment concentration increases, the pressure pulsation at the pump outlet and the vibration intensity of the pump body increase, and the impeller wear is more serious. In addition, with the increase of pump operation time, the outlet of blade pressure surface, the middle area of blade suction surface and the outlet area of impeller back shroud passage are seriously worn, and the outlet of blade pressure surface is the most serious.
engineering, mechanical,materials science, characterization & testing