Abstract:Constructing strong interfacial interactions and complex filler networks is crucial to establishing high gas barrier properties in rubber composites. In this research, sulfur-graphene oxide (S-GO) hybrids were prepared by in situ growth of sulfur on the surfaces of GO sheets. The S-GO hybrids were also introduced into butadiene styrene rubber (SBR) using a green method of latex compounding. Results showed that sulfur could melt and spread on the surface of the GO during the crosslinking process at high temperatures. This process prevented the aggregation of GO and resulted in a fine dispersion of GO and complex filler networks in S-GO/SBR composites. More importantly, the sulfur particles on the GO surface not only aided the crosslinking of rubber molecules, but also chemically reacted with the GO radicals generated at high temperatures. This occurred by the homolytic cleavage of oxygen-containing groups, which thereby constructed covalent interfaces between the GO and SBR molecules. Due to these strong interfaces and complex filler networks, the tensile and tear strength of S-GO/SBR composites increased by 66.2% and 26.6%, respectively, when compared with conventional GO/SBR composites. The gas permeability coefficient of S-GO/SBR composites was decreased dramatically by 50.7% and 23.3% by comparison with that of pure SBR and GO/SBR composites, respectively. The apparent improvement demonstrated that the facile and effective method used in this research may open up new opportunities for the development of multifunctional rubber crosslinking agent as well as the fabrication of rubber composites with high performance.

Design and preparation of sulfur vulcanized polyamide 66 cross-linked nitrile butadiene rubber networked and its application in blending with graphene oxide

Molecular dynamics study of the mechanical and tribological properties of graphene oxide-reinforced polyamide 66/nitrile butadiene rubber composites

Enhancing Mechanical and Thermal Properties of Styrene-Butadiene Rubber/carboxylated Acrylonitrile Butadiene Rubber Blend by the Usage of Graphene Oxide with Diverse Oxidation Degrees

Improving Mechanical Properties and Thermal Conductivity of Styrene-Butadiene Rubber Via Enhancing Interfacial Interaction Between Rubber and Graphene Oxide/Carbon Nanotubes Hybrid

Nano-sulfur Decorated Graphene Oxide to Improve the Mechanical Properties of Natural Rubber by Interfacial Participate in the Vulcanization Reaction

Impact Of Blend Ratio On The Properties Of Graphene Oxide-Filled Carboxylated Acrylonitrile-Butadiene Rubber/Styrene-Butadiene Rubber Blends

S4-Containing Hyperbranched Polymer Modified Graphene Oxide As Strong Linker for Both Rubber and Carbon Black to Enhance the Crosslinking and Mechanical Properties of Nitrile Butadiene Rubber

High Mechanical Properties, Thermal Conductivity and Solvent Resistance in Graphene Oxide/styrene-Butadiene Rubber Nanocomposites by Engineering Carboxylated Acrylonitrile-Butadiene Rubber

Enhanced Compatibility and Mechanical Properties of Carboxylated Acrylonitrile Butadiene Rubber/Styrene Butadiene Rubber by Using Graphene Oxide As Reinforcing Filler

The design of crosslinks in different vulcanized systems to improve crack growth resistance for carbon black/graphene oxide/natural rubber composites

Impact of Various Oxidation Degrees of Graphene Oxide on the Performance of Styrene–butadiene Rubber Nanocomposites

Effects of Graphene Oxide on the Strain-Induced Crystallization and Mechanical Properties of Natural Rubber Crosslinked by Different Vulcanization Systems

Improved mechanical performance and swelling resistance of ethylene propylene diene monomer/styrene butadiene rubber nanocomposites through the incorporation of graphene oxide as a reinforcing filler

Influence of Graphene Oxide and Multiwalled Carbon Nanotubes on the Dynamic Mechanical Properties and Heat Buildup of Natural Rubber/carbon Black Composites

Enhanced Gas Barrier Properties of Graphene Oxide/rubber Composites with Strong Interfaces Constructed by Graphene Oxide and Sulfur

Enhanced Mechanical and Thermal Properties of SBR Composites by Introducing Graphene Oxide Nanosheets Decorated with Silica Particles

Graphene oxide induced crosslinking and reinforcement of elastomers

High Performance Graphene Oxide Based Rubber Composites

Ionic Liquid Functionalized Graphene Oxide for Enhancement of Styrene‐butadiene Rubber Nanocomposites

Tailoring Rubber-Filler Interfacial Interaction and Multifunctional Rubber Nanocomposites by Usage of Graphene Oxide with Different Oxidation Degrees

Improving Thermo-Oxidative Stability of Nitrile Rubber Composites by Functional Graphene Oxide