Abstract:Solid oxide fuel cells (SOFCs) with a high energy conversion efficiency and low emissions are considered as promising substitutes for traditional thermal power devices [ 1 ,2] . However, the conventional Ni based anode suffers from agglomeration, sulfur poisoning and carbon coking with hydrocarbon fuels, which limit its application [3] . Various alternative materials have been studied as promising SOFC anodes. Meanwhile, in situ exsolution has been developed as a fabrication strategy to prepare perovskite oxides with uniformly dispersed nanometallic particles [4] . Recently, A-site ordered PrBaMn 2 O 5+d has been reported as a promising anode with high electrical conductivity and good catalytic activity for the electrochemical oxidation of both hydrogen and hydrocarbons [5] . In this work, La 0.5 Ba 0.5 Mn 1-2x Co x Fe x O 3-δ (x=0, 0.05, 0.1) has been synthesized with the Pechini method and investigated as an anode material of SOFCs with H 2 and methane as fuels. The structure of the anode converts from a mixture of cubic and hexagonal phases to a perovskite structure with core-shell nanoparticles on the surface after reduction. The in situ exsolution process of the metals on the B sites is studied with an X-ray photoelectron spectrometer, a thermogravimetric analyzer and a transmission electron microscope. The results of the electrochemical tests demonstrate that the doping of Co and Fe into B sites effectively improve the performance of the single cell with H 2 as the fuel. A single cell with a 2CF-LBM anode layer and a 300-μm La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 3-δ electrolyte layer exhibits a maximum power density ( P max ) of 98, 210, 383, 653 and 1479 mW cm -2 with wet H 2 as the fuel at 650, 700, 750, 800 and 850 o C, respectively, and achieves a peak power density of 503 mW cm -2 at 850 o C when fueled with wet CH 4 . Moreover, the 2CF-LBM anode exhibits a high coking resistance, and no remarkable degradation of the performance is observed when the cell is operated with methane as the fuel for more than 200 hours. Keywords: Solid oxide fuel cell; Perovskite; Anode; In situ exsolution Table 1. Abbreviations of various anode materials and the maximum output power densities of the cells fed with H 2 and CH 4 at 850 o C Anode composition Abbreviation P max,H2 (mW cm -2 ) P max,CH4 (mW cm -2 ) La 0.5 Ba 0.5 MnO 3-δ LBM 962 336 La 0.5 Ba 0.5 Mn 0.9 Co 0.05 Fe 0.05 O 3-δ 1CF-LBM 1241 389 La 0.5 Ba 0.5 Mn 0.8 Co 0.1 Fe 0.1 O 3-δ 2CF-LBM 1479 503 Figure 1. (a) Bright-field TEM image, (b) HAADF imagine with the EDS linear scanning and (c) EDS elemental map of the reduced 2CF-LBM; (d) I-V and I-P curves of the single cell in 650-850 o C with H 2 as fuel. References S. Tao, J.T. Irvine, Nature materials 2003, 2 , 320-323. Z. Shao, S.M. Haile, Nature 2004, 431 , 170-173. X.M. Ge, S.H. Chan, Q.L Liu, et al., Advanced energy materials 2012, 2 , 1156-1181. D. Neagu, G. Tsekouras, D. N. Miller, et al., Nature Chemistry 2013, 5 , 916-923. S. Sengodan, S. Choi, A. Jun, et al., Nature materials 2015, 14 , 205-209. Figure 1

Exsolved perovskites for reliable SOFCs fed with dry biogas

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

La0.6Sr0.4Fe0.8Ni0.2O3-δ perovskite with in-situ exsolved Ni-Fe nanoparticles as high activity catalyst for symmetric solid oxide electrolysis cells

Perovskite Chromite With In-Situ Assembled Ni-Co Nano-Alloys: A Potential Bifunctional Electrode Catalyst for Solid Oxide Cells

In-situ exsolved Ni-Cu alloy nanoparticles for optimization of perovskite electrodes in solid oxide electrolysis cell

Enhancing the Catalytic Activity and Coking Tolerance of the Perovskite Anode for Solid Oxide Fuel Cells through In Situ Exsolution of Co-Fe Nanoparticles

In Situ Exsolution of Quaternary Alloy Nanoparticles for CO2‐CO Mutual Conversion Using Reversible Solid Oxide Cells

Metal Exsolution to Enhance the Catalytic Activity of Electrodes in Solid Oxide Fuel Cells

Nano La0.6ca0.4fe0.8ni0.2o3-Delta Decorated Porous Doped Ceria As A Novel Cobalt-Free Electrode For "Symmetrical" Solid Oxide Fuel Cells

In-situ exsolved FeNi nanoparticles on perovskite matrix anode for co-production of ethylene and power from ethane in proton conducting fuel cells

Exsolved Alloy Nanoparticles Decorated Ruddlesden–Popper Perovskite As Sulfur-Tolerant Anodes for Solid Oxide Fuel Cells

Boosting the Performance and Stability of Perovskites by Construction of NiFe Alloy and PrOx Heterogeneously Structured Composites for High‐Performance Solid Oxide Fuel Cell Anode

In situ self-reconstructed nanoparticle-coated cathode and anode by nitric acid etching for symmetric solid oxide fuel cells

In Situ Construction of Metal/Perovskite Interfaces with Exsolved FeNi Alloy Nanoparticles for High-Temperature CO2 Electrolysis

Ni/NiO Exsolved Perovskite La0.2Sr0.7Ti0.9Ni0.1O3-δ for Semiconductor-Ionic Fuel Cells: Roles of Electrocatalytic Activity and Physical Junctions

In situ exsolved Fe nanoparticles enhance the catalytic performance of perovskite cathode materials in solid oxide electrolytic cells

Perovskite-Based Materials As Alternative Fuel Electrodes for Solid Oxide Electrolysis Cells (SOECs)

A Regenerative Coking and Sulfur Resistant Composite Anode with Cu Exsolution for Intermediate Temperature Solid Oxide Fuel Cells

High catalytic activity of Fe-based perovskite fuel electrode for direct CO2 electroreduction in SOECs

In Situ Exsolved Core-Shell Nanoparticles on Perovskite Parent: A Novel High-Performance Anode for Solid Oxide Fuel Cells

Metal Exsolution from Perovskite-based Anode in Solid Oxide Fuel Cells