Abstract:BACKGROUND: The Fukushima Daiichi Nuclear Power Plant accident (2011) released large amounts of radioactive substances into the environment and generated highly radioactive debris. Post-accident countermeasures are currently in the phase of fuel debris removal, which requires the analysis of radioactive contaminants in the environment and fuel. The spectra of solely β-emitting nuclides, such as 90Sr, overlap; thus, an effective method for nuclide separation is desired. Since conventional methods for high-dose sample analysis pose substantial exposure risks and generate large amounts of secondary radioactive waste, faster procedures allowing for decreased radiation emission are highly desirable.RESULTS: In this study, we developed a 90Sr2+ quantitation technique based on liquid scintillation counting (LSC)-coupled capillary transient isotachophoresis (ctITP), along with two-point detection and relying on the rapid concentration, separation, and fractionation of 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA)-complexed 90Sr2+ in a single run. The applicability of our method for the analysis of real-world samples was verified by conducting addition-recovery experiments using a seawater reference material and radioactive liquid waste obtained from the radioactive waste treatment facility at the Japan Atomic Energy Agency. The recovery determined by LSC was 95-113%, indicating successful quantitative analysis. 90Sr recovery was determined to be 90.1% from a contaminated water sample obtained from the Fukushima Daiichi Nuclear Power Plant, which was analyzed using the standard addition of 90Sr. The sensitivity (detection limit = 0.016 Bq) of the proposed method on a radioactivity basis was equal to or higher than that of the conventional method using ion exchange-LSC (0.012-0.07 Bq).SIGNIFICANCE AND NOVELTY: Our method allows for the handling of high-dose radioactive samples at the microliter level and is substantially faster than conventional ion exchange protocols, whereas ctITP has not been used for practical applications due to inaccurate collection and lack of a suitable chemical system. The concentration-separation-fractionation protocol in ctITP is successful due to the existence of a rare inert Sr2+ complex and precise fractionation. This study establishes a pathway toward safer and more practical analysis of radionuclides.

Fast separation and determination of 55Fe and 63Ni using chelating resin Chelex 100 for activated parts of nuclear reactors and nuclear forensics

Separation of No-Carrier-Added Radioactive Hafnium From Rock Samples

A chemical separation procedure using ionic liquid extraction for 59 Fe and 55 Fe quantification

Efficient Separation of Uranium and Lanthanides Based on High-Performance Ion Exchange Chromatography

Separation of Gold from Irradiated Actinide Material Utilizing a 2- Thenoyltrifluoroacetone Extraction Resin

Study on Separation of Rhenium, a Surrogate Element of Fissiogenic Technetium, from Aqueous Matrices Using Ion-Selective Extraction Chromatographic Resins

Optimization of the radiochemical separation and determination for 147Pm and 151Sm in nuclear waste samples

Efficient Separation and High Selectivity for Nickel from Cobalt-Solution by a Novel Chelating Resin: Batch, Column and Competition Investigation

Chromatographic Separation of Actinides and Fission Products

A Fast and Efficient Procedure of Iron Species Determination Based on HPLC with a Short Column and Detection in High Resolution ICP OES

Radiochemical isolation of 45Ti using ion chromatography

Development of a Chelex-100 Based Three-step Chromatographic Procedure for Nickel Isotope Analysis in Geological Samples

Refined Separation of Combined Fe–Hf from Rock Matrices for Isotope Analyses Using AG-MP-1M and Ln-Spec Chromatographic Extraction Resins

Separation and preconcentration of perrhenate from ionic solutions by ion exchange chromatography

Sensitive redox speciation of iron, neptunium, and plutonium by capillary electrophoresis hyphenated to inductively coupled plasma sector field mass spectrometry

Separation of 44Sc from Natural Calcium Carbonate Targets for Synthesis of 44Sc-DOTATATE

Radioanalytical method for the separation of trace plutonium and neptunium from uranium

Determination of 90Sr in highly radioactive aqueous samples via conversion to a kinetically stable 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid complex followed by concentration–separation–fractionation based on capillary electrophoresis–liquid scintillation

Separation and recovery of exotic radiolanthanides from irradiated tantalum targets for half-life measurements

Determination of uranium isotopes in marine sediments and seawaters by SF ICP-MS after rapid chemical separation using TK200 resin

Selective Separation of Radiocesium from Complex Aqueous Matrices Using Dual Solid-Phase Extraction Systems