Abstract:The paper considers the peculiarities of creating digital copies of objects using reverse engineering technology. The main process used in reverse engineering is the processing of digital copies of objects, which is called photogrammetry. The reverse engineering process consists of the following stages. First, a 3D scan of the product and scan data processing is performed. The received digital data (polygonal mesh) is converted into a CAD file, which can be used to change the shape and topology of the model in accordance with the project. Based on this, an analysis of the two main technologies on which photogrammetry is based was performed: 1) laser triangulation method (laser scanners are used), 2) structured light method (optical scanners are used). The main disadvantages of using laser triangulation when scanning machine parts and methods of reducing their negative impact on the final result are given. The process of determining the position of a point when scanning parts by the laser triangulation method is considered in detail. Equations for normalizing the position of the point and equations that remove the distortion of the point due to the aberration of the camera lens are given. An equation for determining the width of a laser beam is presented, on the basis of which its main geometric characteristics are determined. A general diagram of the influence of the main factors on the quality of the process of scanning parts by the method of laser triangulation is constructed. One of the varieties of scanning objects using structured light is the range imaging (SfM) technique. The SfM technique is a process of estimating a three-dimensional structure from a sequence of two-dimensional images that can be associated with local traffic signals. The position of the camera in space is used to find the x,y,z coordinates of each pixel. An overview of the main software for creating and editing a structured polygonal mesh based on scan data is carried out. As a study of the process of reverse engineering technology, a connecting rod of a car engine was scanned by the SfM method and its digital model was created.

Accuracy analysis of a piece-to-piece reverse engineering workflow for a turbine foil based on multi-modal computed tomography and additive manufacturing

Reverse engineering of pump as turbine for CFD analysis

Feature Array Extraction in Reverse Modeling of Turbine Blade

Worn area modeling for automating the repair of turbine blades

BROKEN AREA MODELING FOR REPAIR AUTOMATION

Reverse Engineering on Jet Engine Turbine Blade Based on 3D Printing Design Intent

Modeling and Analysis of a Francis Turbine Blade

Analysis of the Accuracy of CAD Modeling in Engineering and Medical Industries Based on Measurement Data Using Reverse Engineering Methods

Accurate Model Construction of Deformed Aero-Engine Blades for Remanufacturing

A Hybrid Method of Reconstructing 3D Airfoil Profile from Incomplete and Corrupted Optical Scans

3D CAD model reconstruction and fast prototyping of rotational parts: a reverse engineering approach

Algorithm for remanufacturing of damaged parts with hybrid 3D printing and machining process

An Adaptive Geometry Transformation and Repair Method for Hybrid Manufacturing

Establishing large-scale wind turbine blade CAD model based on reverse engineering

Correcting Hardening Artifacts of Aero-Engine Blades with an Iterative Linear Fitting Technique Framework

Optimum Material Evaluation for Gas Turbine Blade Using Reverse Engineering (RE) and FEA

Integrated Analysis Method of Thin-Walled Turbine Blade Precise Machining

Reverse Engineering Design for Parts with Cavum Structure Based on MIMICS

Intelligent System For Turbine Blade Overhaul Using Robust Profile Re-Construction Algorithm

Excess Welding Area Localisation and Profile Modelling on Distorted Surface in Turbine Component Repairing Process

Use of reverse engineering methods in the process of restoration of machine parts