Abstract:Transparent conductive electrodes (TCEs) are important components of various optoelectronic devices and commonly used in solar cells, touch screens and other display technologies. The most widely used material for industrial applications of TCEs is indium tin oxide (ITO), which has a low sheet resistance of less than 100 Ω sq−1, and high optical transparency of ~90%. However, ITO-based TCEs are relatively expensive owing to the scarcity of the indium supply and the high sputtering processing costs. In addition, ITO films are brittle, which limits their application as flexible and stretchable components in future electronic devices. In order to address these concerns, various emerging materials such as graphene, carbon nanotubes (CNTs), conductive polymers, and metal NWs are being considered as alternatives to ITO. Among these candidate replacements, Group 11 metal NWs, especially silver NWs (Ag NWs) have garnered special interest owing to their excellent electrical and optical properties; and, solution-processability. Ag NWs are usually prepared and suspended in a solution and the resultant colloidal ink is used to coat plastic film or other substrates by spin-coating with Mayer bar or roll-to-roll processing to create transparent conducting sheets. Highly transparent and conductive Ag NW based thin films have been fabricated with a sheet resistance of <20 Ω sq−1 and a transmittance of ∼90%, which is similar to the performance of commercial ITO substrates. However, Ag NWs-based electrodes suffer from inherent limitations that restrict their applicability. One major issue is that Ag NWs are prone to oxidation, which limits their functional processability and lifetime. Coating the Ag NWs with a protective metal oxide (e.g. TiO2, SnO2, ZnO) has the potential to substantially improve the chemical, thermal and mechanical stabilities of Ag NWs. However, the preparation of a metal oxide protection coating usually requires depositing the metal oxide in a vacuum on a prepared film, which is not suitable for roll-to-roll continuous production of films with large areas. Fabrication of highly conductive and air-stable Ag NWs-based electrodes via an all-solution process for flexible and transparent applications remains a challenge. Here, we developed a nucleation mediated method using nanowire seeds for the selective synthesis of uniform Ag NWs via polyol syntheses. The seed-mediated polyol approach gives Ag NWs with high reproducibility (>90% in numerous repetitions of the synthesis), high processing efficiency (grams or more are possible for each synthesis run), and high aspect ratios (>2000), with average dimensions of L> 100 µm and D < 50nm.The Ag@TiO2 NWs subsequently created by surface modification of the Ag NWS have a substantially higher thermal stability than Ag NWs which have the same diameter, and can be annealed to 300 ˚C. Transparent conductive films can be prepared by simple vacuum filtration or by spin coating onto an appropriate filter paper and then by direct transfer to the desired glass or plastic substrate.Therefore, Ag@TiO2 nanowires are ideal candidates for transparent electrodes with good conductivity, high transmittance and low haze, and are demonstrated to be thermally and chemically stable for long-term applications.

Multiple times synthesis of silver nanowires by recycling the waste left after standard polyol synthesis for flexible transparent heater

Simple Recycling of Ag+, Surfactant, and Solvent for Repeatable Synthesis of Silver Nanowires for Applications As Flexible Transparent Heaters

Self-Limited Nanosoldering of Silver Nanowires for High-Performance Flexible Transparent Heaters

Fabrication of silver nanowire transparent electrodes at room temperature

Facile Synthesis of Silver Nanowires with Different Aspect Ratios and Used as High-Performance Flexible Transparent Electrodes

(Invited) Synthesis of Thermally and Chemically Stable Silver Nanowires for Transparent Electrode

Synthesis and Applications of Silver Nanowires for Transparent Conductive Films

One-Pot Synthesis and Purification of Ultralong Silver Nanowires for Flexible Transparent Conductive Electrodes

Optoelectronic and Electrothermal Properties of Transparent Conductive Silver Nanowires Films

Fabrication of Embedded Silver Nanowires on Arbitrary Substrates with Enhanced Stability Via Chemisorbed Alkanethiolate.

Large-Scale Preparation of Silver Nanowire-Based Flexible Transparent Film Heaters by Slot-Die Coating

Flexible Transparent Electrodes Based on Silver Nanowires Synthesized Via a Simple Method.

Fused Silver Nanowires with Silica Sol Nanoparticles for Smooth, Flexible, Electrically Conductive and Highly Stable Transparent Electrodes

Hybrid PEDOT:PSS to Obtain High-Performance Ag NW-based Flexible Transparent Electrodes for Transparent Heaters

Ultraflexible transparent conductive films based on Ag nanowires for use in quick thermal response transparent heater

Annealing-Free and Strongly Adhesive Silver Nanowire Networks with Long-Term Reliability by Introduction of A Nonconductive and Biocompatible Polymer Binder

Durable silver nanowire transparent electrodes enabled by biorenewable nanocoating using chitin and cellulose nanofibers for flexible electronics

Rapid Nanowelding of Silver Nanowires by Focused-Light-scanning for High-Performance Flexible Transparent Electrodes

Fast Synthesis of Silver Nanowires Under Room Temperature via Ultrasonication-Mediated Galvanic Replacement for Flexible Transparent Electrodes

Preparation and Cold Welding of Silver Nanowire Based Transparent Electrodes with Optical Transmittances >90% and Sheet Resistances <10 Ohm/sq.

Cost-Effective Fabrication of Uniformly Aligned Silver Nanowire Microgrid-Based Transparent Electrodes with Higher Than 99% Transmittance