Abstract:The study utilizes open-access data to generate power demand curves for a hybrid automotive system, testing twelve configurations with three different energy management strategies and four values for the degree of hybridization (DOH), the latter representing the share of the total power of the vehicle powertrain supplied by the battery. The first control logic (Battery Main—BTM) uses mainly batteries to satisfy the power demand and fuel cells as backup, while in the other two controllers, fuel cells operate continuously (Fuel Cell Main—FCM) or within a fixed range (Fuel Cell Fixed—FCF) using batteries as backup. The results are assessed in terms of H2 consumption, overall system efficiency, and fuel cell predicted lifespan. The battery is heavily stressed in the BTM and FCF logics, while the FCM logic uses the battery only occasionally to cover load peaks. This is reflected in the battery's State of Charge (SOC), indicating different battery stress levels between the BTM and FCF modes. The FCF logic has higher stress levels due to load demand, reducing battery lifetime. In the BTM and FCM modes, the fuel cell operates with variable power, while in the FCF mode, the fuel cell operates in a range between 90 and 105% of its rated power to ensure its lifetime. In the BTM and FCM modes, hydrogen consumption decreases at almost the same rate as the DOH increases, due to a decrease in battery capacity and a smaller amount of hydrogen being used to recharge it. In contrast, the FCF control logic results in a larger fuel consumption when the DOH decreases. In terms of FC durability, the FCF control logic performs better, with a predicted lifetime ranging from 1815 h for DOH = 0.5 to 2428 h for DOH = 0.1. The FCM logic has the worst performance, with a predicted lifetime of 800 to 808 h, being almost insensitive to the DOH variation. Simulations were performed on two different driving cycles, and similar trends were observed. Simulations taking into account fuel cell (FC) performance degradation showed an increase in hydrogen consumption of approximately 38% after 12 years. Overall, this study highlights the importance of optimizing control systems to improve the performance of fuel cell hybrid vehicles, also taking into account the component of performance degradation.

Improving fuel efficiency and durability in fuel cell vehicles through component sizing and power distribution management

Plug-in fuel cell vehicle performance and battery sizing optimization based on reduced fuel cell energy consumption and waste heat

Contribution to energy management of fuel cell/battery hybrid electric vehicles

Incorporating the best sizing and a new energy management approach into the fuel cell hybrid electric vehicle design

Improving the operation of multi-stack PEM fuel cell systems to increase efficiency, durability and lifespan while reducing ageing

Optimal powertrain component sizing of a fuel cell plug-in hybrid electric vehicle using multi-objective genetic algorithm

Optimal Sizing of Fuel Cell Electric Vehicle Powertrain Considering Multiple Objectives

Multi-objective Energy Management Optimization and Parameter Sizing for Proton Exchange Membrane Hybrid Fuel Cell Vehicles

Simulation of fuel cell membrane durability under vehicle operation

Energy Flow Modeling and Real-Time Control Design Basing on Mean Values for Maximizing Driving Mileage of a Fuel Cell Bus

Simulation and optimization of hydrogen consumption in a fuel cell/battery hybrid vehicle

An Energy Management Strategy and Parameter Optimization of Fuel Cell Electric Vehicles

Sizing of the Propulsion System for a Heavy-Duty Fuel Cell Commercial Vehicle

Energy management and component sizing for a fuel cell/battery/supercapacitor hybrid powertrain based on two-dimensional optimization algorithms

Dynamic Simulation of a Fuel Cell Bus: Investigating Inner States of Water Content, and Water Saturation in Different Layers

Effect of the Degree of Hybridization and Energy Management Strategy on the Performance of a Fuel Cell/Battery Vehicle in Real-World Driving Cycles

Power Management Strategy Based on Adaptive Neuro-Fuzzy Inference System for Fuel Cell-Battery Hybrid Vehicle

Optimization of Energy Management Strategy for Fuel Cell Hybrid Electric Vehicles Based on Dynamic Programming

Optimal Sizing of Plug-In Fuel Cell Electric Vehicles Using Models of Vehicle Performance and System Cost

An Improved Energy Management Strategy for Fuel Cell Hybrid Vehicles Based on the Pontryagin's Minimum Principle