Innovative Approaches for Drug Discovery: Quantifying Drug Distribution and Response with Raman Imaging

Erin L Dunnington,Brian S Wong,Dan Fu,Erin L. Dunnington,Brian S. Wong

DOI: https://doi.org/10.1021/acs.analchem.4c01413

IF: 7.4

2024-04-17

Analytical Chemistry

Abstract:Anal Chem . 2024 Apr 16. doi: 10.1021/acs.analchem.4c01413. Online ahead of print. NO

chemistry, analytical

What problem does this paper attempt to address?

Subcellular Tracking of Deuterated Drugs by Stimulated Raman Scattering Microscopy

Chengyong Hu,Zheng Xue,Hyeon Jeong Lee

DOI: https://doi.org/10.1117/12.2687182

2023-01-01

Abstract:Lipid peroxidation, linked to neurodegenerative diseases and mitochondrial dysfunction, targets polyunsaturated fatty acids (PUFAs) in cellular membranes. RT001, a novel drug with deuterium-substituted linoleic acid, inhibits lipid peroxidation by slowing down the chain reaction initiated by reactive oxygen species. Studies suggest that deuterated PUFAs presented in a fraction of the total PUFA pool, provide cellular protection. To gain insights into the underlying mechanisms, we utilized stimulated Raman scattering (SRS) imaging to analyze the subcellular distribution of RT001 using yeast as a model system. The isotopic substitution of deuterium enhances chemical contrast, enabling the observation of drug delivery dynamics. Concentration- and time-dependent aggregation of RT001 in lipid droplets and cell membranes were observed. SRS imaging holds promise for investigating metabolic processes of deuterated drugs such as RT001, thereby facilitating drug screening and development.
Raman mapping of pharmaceuticals

Keith C Gordon,Cushla M McGoverin

DOI: https://doi.org/10.1016/j.ijpharm.2010.12.030

2011-09-30

Abstract:Raman spectroscopy may be implemented through a microscope to provide fine scale axial and lateral chemical maps. The molecular structure of many drugs makes Raman spectroscopy particularly well suited to the investigation of pharmaceutical systems. Chemometric methods currently used to assess bulk Raman spectroscopic data are typically applied to Raman mapping data from pharmaceuticals; few reports exist where the spatial information inherent to a mapped dataset is used for the calculation of chemical maps. Both univariate and multivariate methods have been applied to Raman mapping data to determine the distribution of active pharmaceutical ingredients (APIs) in tablets, solid dispersions for increased solubility and controlled release devices. The ability to axially (depth) profile using Raman mapping has been used in studies of API penetration through membranes, cellular uptake of drug delivery liposomes, and initial API distribution and subsequent elution from coatings of medical devices. New instrumental developments will increase the efficiency of Raman mapping and lead to greater utilisation of Raman mapping for analyses of pharmaceutical systems.
Research Progress of Raman Spectroscopy and Raman Imaging in Pharmaceutical Analysis.

Jie Ren,Shijie Mao,Jidong Lin,Ying Xu,Qiaoqiao Zhu,Ning Xu

DOI: https://doi.org/10.2174/1381612828666220518145635

IF: 3.31

2022-05-22

Current Pharmaceutical Design

Abstract:The analytical investigation of the pharmaceutical process monitors the critical process parameters of the drug, beginning from its development until marketing and postmarketing, and appropriate corrective action can be taken to change the pharmaceutical design at any stage of the process. Advanced analytical methods, such as Raman spectroscopy, are particularly suitable for use in the field of drug analysis, especially for qualitative and quantitative work, due to the advantages of simple sample preparation, fast, nondestructive analysis speed, and effective avoidance of moisture interference. Advanced Raman imaging techniques have gradually become a powerful alternative method for monitoring changes in polymorph distribution and active pharmaceutical ingredient distribution in drug processing and pharmacokinetics. Surface-enhanced Raman spectroscopy (SERS) has also solved the inherent insensitivity and fluorescence problems of Raman, which has made good progress in the field of illegal drug analysis. This review summarizes the application of Raman spectroscopy and imaging technology, which are used in the qualitative and quantitative analysis of solid tablets, quality control of the production process, drug crystal analysis, illegal drug analysis, and monitoring of drug dissolution and release in the field of drug analysis in recent years. Keywords: Raman spectroscopy, Raman imaging, Pharmaceutical analysis, Coherent Raman scattering spectroscopy, Surface-enhanced Raman spectroscopy, Active pharmaceutical ingredients

pharmacology & pharmacy
Quantitative chemometric phenotyping of three-dimensional liver organoids by Raman spectral imaging

Vernon LaLone,Aleksandra Aizenshtadt,John Goertz,Frøydis Sved Skottvoll,Marco Barbero Mota,Junji You,Xiaoyu Zhao,Henriette Engen Berg,Justyna Stokowiec,Minzhi Yu,Anna Schwendeman,Hanne Scholz,Steven Ray Wilson,Stefan Krauss,Molly M. Stevens

DOI: https://doi.org/10.1016/j.crmeth.2023.100440

2023-04-01

Cell Reports Methods

Abstract:Confocal Raman spectral imaging (RSI) enables high-content, label-free visualization of a wide range of molecules in biological specimens without sample preparation. However, reliable quantification of the deconvoluted spectra is needed. Here we develop an integrated bioanalytical methodology, qRamanomics, to qualify RSI as a tissue phantom calibrated tool for quantitative spatial chemotyping of major classes of biomolecules. Next, we apply qRamanomics to fixed 3D liver organoids generated from stem-cell-derived or primary hepatocytes to assess specimen variation and maturity. We then demonstrate the utility of qRamanomics for identifying biomolecular response signatures from a panel of liver-altering drugs, probing drug-induced compositional changes in 3D organoids followed by in situ monitoring of drug metabolism and accumulation. Quantitative chemometric phenotyping constitutes an important step in developing quantitative label-free interrogation of 3D biological specimens.
New techniques in antibiotic discovery and resistance: Raman spectroscopy

Paul R Carey,Hossein Heidari-Torkabadi

DOI: https://doi.org/10.1111/nyas.12847

Abstract:Raman spectroscopy can play a role in both antibiotic discovery and understanding the molecular basis of resistance. A major challenge in drug development is to measure the population of the drug molecules inside a cell line and to follow the chemistry of their reactions with intracellular targets. Recently, a protocol based on Raman microscopy has been developed that achieves these goals. Drug candidates are soaked into live bacterial cells and subsequently the cells are frozen and freeze-dried. The samples yield exemplary (nonresonance) Raman data that provide a measure of the number of drug molecules within each cell, as well as details of drug-target interactions. Results are discussed for two classes of compounds inhibiting either β-lactamase or dihydrofolate reductase enzymes in a number of Gram-positive or Gram-negative cell lines. The advantages of the present protocol are that it does not use labels and it can measure the kinetics of cell-compound uptake on the time scale of minutes. Spectroscopic interpretation is supported by in vitro Raman experiments. Studying drug-target interactions in aqueous solution and in single crystals can provide molecular level insights into drug-target interactions, which, in turn, provide the underpinnings of our understanding of data from bacterial cells. Thus, the applicability of X-ray crystallographic-derived data to in-cell chemistry can be tested.
Comparison of Raman and Near-Infrared Chemical Mapping for the Analysis of Pharmaceutical Tablets

Hannah Carruthers,Don Clark,Fiona Clarke,Karen Faulds,Duncan Graham

DOI: https://doi.org/10.1177/0003702820952440

Abstract:Raman and near-infrared (NIR) chemical mapping are widely used methods in the pharmaceutical industry to understand the distribution of components within a drug product. Recent advancements in instrumentation have enabled the rapid acquisition of high-resolution images. The comparison of these techniques for the analysis of pharmaceutical tablets has not recently been explored and thus the relative performance of each technique is not currently well defined. Here, the differences in the chemical images obtained by each method are assessed and compared with scanning electron microscopy with energy dispersive X-ray microanalysis (SEM-EDX), as an alternative surface imaging technique to understand the ability of each technique to acquire a chemical image representative of the sample surface. It was found that the Raman data showed the best agreement with the spatial distribution of components observed in the SEM-EDX images. Quantitative and qualitative comparison of the Raman and NIR images revealed a very different spatial distribution of components with regards to domain size and shape. The Raman image exhibited sharper and better discriminated domains of each component, whereas the NIR image was heavily dominated by large pixelated domains. This study demonstrated the superiority of using Raman chemical mapping compared with NIR chemical mapping to produce a chemical image representative of the sample surface using routinely available instrumentation to obtain a better approximation of domain size and shape. This is fundamental for understanding knowledge gaps in current manufacturing processes; particularly relating the relationship between components in the formulation, processing condition, and final characteristics. By providing a means to more accurately visualize the components within a tablet matrix, these areas can all be further understood.
Raman Spectroscopy of Seized Drugs and Density Functional Theory Interpretation

Chenghua Sui,Qian Tu,Naibo Chen,Bo Yan,Zhong Lu,Zhili Xu,Yichao Zhang

DOI: https://doi.org/10.1080/00387010.2018.1501703

2018-01-01

Spectroscopy Letters

Abstract:The demand for a hand-held Raman spectrometer in the fast and accurate detection and identification of seized drugs is much higher than before, especially when facing unknown suspicious drugs. However, Raman spectra for the different drugs are less reported due to the inaccessibility of them. Here, we reported the experimental Raman spectra in detail of four typical drugs (such as methamphetamine, ketamine, caffeine, and magu). The Raman vibrational frequencies were also calculated by the method of density functional theory (DFT) at Becke-3-Lee-Yang-Parr (B3LYP) level with the 6-31G and 6-31G(d,p) basis set. The results show that the experimental Raman spectra of these typical drugs are consistent with the theoretical Raman spectra. Using the potential energy distribution (PED) calculation with the GAR2PED program, the assignments of the observed Raman bands to the vibrational modes were presented. Further, methamphetamine and its camouflage N-benzylisopropylamine were analyzed by Raman spectroscopy and DFT calculations, and the result showed that the obvious differences of the Raman characteristic bands for these two samples could be found so that Raman technique could be used to identify the authenticity of methamphetamine. All the above results confirm the potential of the approach involving Raman spectroscopy combined with DFT calculations in the characterization of drugs. Based on this, the experimental spectra of seized drugs measured directly through a plastic package were studied. Raman spectroscopy has the advantage of being performed through packaging without disturbing the samples. Polypropylene transparent packaging does not alter the spectra of the drugs but will mask the corresponding bands if the Raman spectrum has a strong autofluorescence interference.
Non-destructive Raman Method Development for Quantifying Active Pharmaceutical Ingredient in an Oral Suspension Through Plastic Dosing Syringes

Jacquelyn North,Raaidah Saari-Nordhaus,Gregory Doddridge,Madeline Seefeldt,Daniel A Young,Yemin Liu

DOI: https://doi.org/10.1208/s12249-024-02775-0

IF: 3.3

2024-04-07

AAPS PharmSciTech

Abstract:For liquid drug products, e.g., solutions or suspensions for oral or parenteral dosing, stability needs to be demonstrated in primary packaging during storage and in dosing devices during in-use periods per quality guidelines from the International Conference on Harmonisation (ICH) and the European Agency for the Evaluation of Medicinal Products (EMEA). One aspect of stability testing for liquid drug products is in-use stability, which typically includes transferring the liquid samples into another container for further sample preparation with extraction diluent and necessary agitation. Samples are then analyzed with traditional chromatography methods, which are laborious, prone to human errors, and time-consuming, especially when this process needs to be repeated multiple times during storage and in-use periods. Being able to analyze the liquid samples non-destructively would significantly improve testing efficiency. We investigated different Raman techniques, including transmission Raman (TRS) and back scatter Raman with a non-contact optic (NCO) probe, as alternative non-destructive tools to the UHPLC method for API quantitation in in-use liquid samples pulled into plastic dosing syringes. The linearity of the chemometric methods for these two techniques was demonstrated by cross-validation sample sets at three levels over an API concentration range of 60 to 80 mg/mL. The accuracy of the chemometric models was demonstrated by the accurate prediction of the API concentrations in independent samples from four different pilot plant batches manufactured at different sites. Both techniques were successful in measuring a signal through a plastic oral dosing syringe, and predicting the suspension API concentration to within 4% of the UHPLC-measured value. For future work, there are opportunities to improve the methodology by exploring additional probes or to expand the range of applications by using different sample presentations (such as prefilled syringes) or formulation matrices for solutions and suspensions. Graphical

pharmacology & pharmacy
Research Progress of Raman Spectroscopy and Imaging Techniques for the Pharmaceutical Analysis

Yuchen Tang,Xi Wang,Guoming Zhou,Shubo Guo,Zheng Li,Yunfei Hu,Wenlong Li

DOI: https://doi.org/10.1007/s41664-024-00327-w

2024-01-01

Journal of Analysis and Testing

Abstract:Monitoring critical quality attributes in pharmaceutical manufacturing ensures that the final product meets specified requirements. Process analysis allows for appropriate modifications and customization of pharmaceutical design from formulation to production. The laborious sample presentation and throughput have stimulated the development of in-process spectroscopy methods for pharmaceutical analysis. Raman spectroscopy has demonstrated the unique advantages of rapid and non-destructive analysis, good interpretability, and effective moisture interference avoidance. The Raman imaging technique can obtain spatial and chemical information that is useful for characterizing drug quality. This article describes the applications of Raman spectroscopy and imaging techniques in pharmaceutical analysis. It covers the monitoring of crystal forms and particle size distribution, quantification of active pharmaceutical ingredients, evaluation of contents uniformity, prediction of dissolution profiles in solid preparations, identification of counterfeit drugs, and applications in reverse engineering and process analytical technology. Moreover, the challenges and prospects are proposed to facilitate the continued development of Raman spectroscopy and imaging techniques, providing necessary references for further research in this field.
A Non-destructive Quantitative Transmission Raman Spectroscopy Method for Active Pharmaceutical Ingredient in Drug Product In-Use Samples Prepared in Dosing Vehicles

Gregory Doddridge,Edwin Hong,David Cheng Thiam Tan,Yemin Liu

DOI: https://doi.org/10.1208/s12249-022-02286-w

IF: 3.3

2022-05-04

AAPS PharmSciTech

Abstract:Compatibility and in-use stability screening studies are required for dosing vehicle selection based on the FDA's guidance, "Use of Liquids and/or Soft Foods as Vehicles for Drug Administration: General Considerations for Selection and In Vitro Methods for Product Quality Assessments." One of the major analytical challenges in these studies is sample preparation because extracting active pharmaceutical ingredient (API) from the drug product mixed into viscous soft-food matrices (e.g., yogurt or apple sauce) is laborious, prone to human errors, and time-consuming. Additionally, observed in-solution degradation caused by dosing vehicle ingredients causes analytical error. In our study, NIR- and Raman-based non-destructive tests have been explored and developed with drug product powder formulation prepared in dosing vehicles. A transmission Raman chemometrics model was developed and calibrated with samples varying in API content, water content, and milled extrudate particle size distribution. The method was proven to be accurate, linear, selective, and robust. Our work with non-destructive tests eases the laboratory burdens to perform in-use stability studies with dosing vehicles for all phases of development that need to cover all application scenarios of clinical preparation and usage. Graphical

pharmacology & pharmacy
An Expandable Mechanopharmaceutical Device (3): a Versatile Raman Spectral Cytometry Approach to Study the Drug Cargo Capacity of Individual Macrophages

Vernon LaLone,Márcio A. Mourão,Theodore J. Standiford,Krishnan Raghavendran,Kerby Shedden,Kathleen A. Stringer,Gus R. Rosania

DOI: https://doi.org/10.1007/s11095-018-2540-0

IF: 4.58

2018-11-06

Pharmaceutical Research

Abstract:PurposeTo improve cytometric phenotyping abilities and better understand cell populations with high interindividual variability, a novel Raman-based microanalysis was developed to characterize macrophages on the basis of chemical composition, specifically to measure and characterize intracellular drug distribution and phase separation in relation to endogenous cellular biomolecules.MethodsThe microanalysis was developed for the commercially-available WiTec alpha300R confocal Raman microscope. Alveolar macrophages were isolated and incubated in the presence of pharmaceutical compounds nilotinib, chloroquine, or etravirine. A Raman data processing algorithm was specifically developed to acquire the Raman signals emitted from single-cells and calculate the signal contributions from each of the major molecular components present in cell samples.ResultsOur methodology enabled analysis of the most abundant biochemicals present in typical eukaryotic cells and clearly identified “foamy” lipid-laden macrophages throughout cell populations, indicating feasibility for cellular lipid content analysis in the context of different diseases. Single-cell imaging revealed differences in intracellular distribution behavior for each drug; nilotinib underwent phase separation and self-aggregation while chloroquine and etravirine accumulated primarily via lipid partitioning.ConclusionsThis methodology establishes a versatile cytometric analysis of drug cargo loading in macrophages requiring small numbers of cells with foreseeable applications in toxicology, disease pathology, and drug discovery.

pharmacology & pharmacy,chemistry, multidisciplinary
Confocal UV and resonance Raman microscopic imaging of pharmaceutical products

Frederick G Vogt,Mark Strohmeier

DOI: https://doi.org/10.1021/mp400314s

2013-11-04

Abstract:Chemical imaging using confocal Raman microscopy is a useful analytical tool in drug development because of its ability to spatially image active ingredients and excipients in dosage forms and relate their distribution to product performance. While Raman spectra are highly specific for individual components of a formulation, most Raman microscopic mapping experiments require extensive experimental time. Laser wavelengths in the near-infrared range are used to suppress fluorescence but reduce sensitivity because of the inverse quadratic dependence of Raman scattering on laser wavelength. Compact, simple ultraviolet (UV) laser designs now allow for confocal UV Raman microscopy to be performed using a versatile instrument also capable of conventional Raman microscopy and epifluorescence imaging analyses. This study presents the results of UV Raman microscopy analyses using 266 nm laser irradiation of four pharmaceutical compositions of interest, including two types of tablets containing low doses of active ingredients (in the 0.2% w/w range), an amorphous dispersion containing 1% w/w of a small molecule drug, and an enteric coated layered peptide formulation. Resonance Raman enhancements are observed for four of the active ingredients studied in these formulations. The spectroscopic properties of the materials used in this study are also assessed by diffuse reflectance UV-visible spectroscopy, fluorescence spectroscopy, and conventional bulk Fourier transform Raman spectroscopy using 1064 nm laser irradiation. Confocal UV Raman microscopy was found to offer good sensitivity and allowed for rapid microscopic mapping of drugs and excipients at low concentrations in pharmaceutical formulations.
Unsupervised data driven approaches to Raman imaging through a multimode optical fiber

Liam Collard,Mohammadrahim Kazemzadeh,Massimo De Vittorio,Ferruccio Pisanello

2024-05-22

Abstract:Raman spectroscopy is a label-free, chemically specific optical technique which provides detailed information about the chemical composition and structure of the excited analyte. Because of this, there is growing research interest in miniaturizing Raman probes to reach deep regions of the body. Typically, such probes utilize multiple optical fibers to act as separate excitation/collection channels with optical filters attached to the distal facet to separate the collected signal from the background optical signal from the probe itself. Although these probes have achieved impressive diagnostic performance, their use is limited by the overall size of the probe, which is typically several hundred micrometers to millimeters. Here, we show how a wavefront shaping technique can be used to measure Raman images through a single, hair thin multimode fiber. The wavefront shaping technique transforms the tip of the fiber to a sub-cellular spatial resolution Raman microscope. The resultant Raman images were analyzed with a variety of state-of-the-art statistical techniques including PCA, t-SNE, UMAP and k-means clustering. Our data-driven approach enables us to create high quality Raman images of microclusters of pharmaceuticals through a standard silica multimode optical fiber.

Optics,Chemical Physics
Establishment of a Method for the Introduction of Poorly Water-Soluble Drugs in Cells and Evaluation of Intracellular Concentration Distribution Using Resonance Raman Imaging

Keisuke Koga,Shinji Kajimoto,Yuta Yoshizaki,Hiroaki Takahashi,Lisa Kageyama,Tomohiro Konno,Takakazu Nakabayashi

DOI: https://doi.org/10.1021/acs.jpcb.3c06601

IF: 3.466

2024-02-01

The Journal of Physical Chemistry B

Abstract:Label-free measurement is essential to understand the metabolism of drug molecules introduced into cells. Raman imaging is a powerful method to investigate intracellular drug molecules because it provides in situ label-free observation of introduced molecules. In this study, we propose that Raman imaging can be used not only to observe the intracellular distribution of drug molecules but also to quantitatively visualize the concentration distribution reflecting each organelle in a single living...

chemistry, physical
Advances in Raman spectroscopy and imaging for biomedical research

Soumik Siddhanta,Artem Pliss,Andrey Kuzmin,Alexander Baev,Sunil Khare,Pramit Chowdhury,Ashok Ganguli,Paras Prasad

DOI: https://doi.org/10.1364/AOP.479884

IF: 24.75

2023-04-13

Advances in Optics and Photonics

Abstract:Starting with a historical account of evolution in Raman spectroscopy, in this review we provide details of the advancements that have pushed detection limits to single molecules and enabled non-invasive molecular characterization of distinct organelles to provide next-generation bioanalytical assays and ultrasensitive molecular and cellular diagnostics. Amidst a growing number of publications in recent years, there is an unmet need for a consolidated review that discusses salient aspects of Raman spectroscopy that are broadly applicable in biosensing ranging from fundamental biology to disease identification and staging, to drug screening and food and agriculture quality control. This review offers a discussion across this range of applications and focuses on the convergent use of Raman spectroscopy, coupling it to bioanalysis, agriculture, and food quality control, which can affect human life through biomedical research, drug discovery, and disease diagnostics. We also highlight how the potent combination of advanced spectroscopy and machine-learning algorithms can further advance Raman data analysis, leading to the emergence of an optical Omics discipline, coined "Ramanomics." Finally, we present our perspectives on future needs and opportunities. © 2023 Optica Publishing Group

optics
Quantitative chemical sensing of drugs in scattering media with Bessel beam Raman spectroscopy

Nan Wang,Feng Ren,Li Li,Haoyu Wang,Lin Wang,Qi Zeng,Yali Song,Tingting Zeng,Shouping Zhu,Xueli Chen

DOI: https://doi.org/10.1364/boe.455666

IF: 3.4

2022-03-25

Biomedical Optics Express

Abstract:Scattering can seriously affect the highly sensitive detection and quantitative analysis of chemical substances in scattering media and becomes a significant challenge for in vivo application of Raman spectroscopy. In this study, we demonstrated a proof of concept for using the self-reconstructing Bessel beam for Raman spectroscopic sensing of the chemicals in the handmade scattering media and biological tissue slices. The homebuilt Bessel beam Raman spectroscopy (BRS) was capable of accurately detecting the Raman spectra of the chemicals buried in the scattering media, and had a superiority in quantitative analysis. The feasibility of the developed technique was verified by detecting the Raman spectra of pure samples in air. Compared with the spectra acquired by the Gaussian beam Raman spectroscope, the performance of the BRS system in terms of Raman spectrum detection and Raman peak recognition was confirmed. Subsequently, by employing the technique for the detection of acetaminophen buried in the scattering media, the application of the new technology in detecting and quantitating the chemicals in the scattering media were underlined, offering greater detection depth and better linear quantification capability than the conventional Gaussian beam Raman spectroscopy. Finally, we explored the potential of the BRS system for chemical sensing of acetaminophen in biological tissue slices, indicating a significant development towards the evaluation of drug in vivo.

radiology, nuclear medicine & medical imaging,biochemical research methods,optics
Quantitation of active pharmaceutical ingredient through the packaging using Raman handheld spectrophotometers: A comparison study

M Alaoui Mansouri,P-Y Sacré,L Coïc,C De Bleye,E Dumont,A Bouklouze,Ph Hubert,R D Marini,E Ziemons

DOI: https://doi.org/10.1016/j.talanta.2019.120306

IF: 6.1

2020-01-15

Talanta

Abstract:Handheld Raman spectroscopy is actually booming. Recent devices improvements aim at addressing the usual Raman spectroscopy issues: fluorescence with shifted-excitation Raman difference spectroscopy (SERDS), poor sensitivity with surface enhanced Raman scattering (SERS) and information only about the sample surface with spatially offset Raman spectroscopy (SORS). While qualitative performances of handheld devices are generally well established, the quantitative analysis of pharmaceutical samples remains challenging. The aim of this study was to compare the quantitative performances of three commercially available handheld Raman spectroscopy devices. Two of them (TruScan and IDRaman mini) are equipped with a 785 nm laser wavelength and operate in a conventional backscattering mode. The IDRaman has the Orbital Raster Scanning (ORS) option to increase the analyzed surface. The third device (Resolve) operates with an 830 nm laser wavelength both in backscattering and in SORS modes. The comparative study was carried out on ibuprofen-mannitol-microcrystalline cellulose ternary mixtures. The concentration of ibuprofen ranged from 24 to 52% (w/w) while the proportions of the two excipients were varied to avoid cross-correlation as much as possible. Analyses were performed either directly through a glass vial or with the glass vial in an opaque polypropylene flask, using a validated FT-NIR spectroscopy method as a reference method. Chemometric analyses were carried out with the Partial Least Squares Regression (PLS-R) algorithm. The quantitative models were validated using the total error approach and the ICH Q2 (R1) guidelines with ± 15% as acceptance limits.
The role of Raman spectroscopy in biopharmaceuticals from development to manufacturing

Karen A. Esmonde-White,Maryann Cuellar,Ian R. Lewis

DOI: https://doi.org/10.1007/s00216-021-03727-4

2021-10-20

Analytical and Bioanalytical Chemistry

Abstract:Abstract Biopharmaceuticals have revolutionized the field of medicine in the types of active ingredient molecules and treatable indications. Adoption of Quality by Design and Process Analytical Technology (PAT) frameworks has helped the biopharmaceutical field to realize consistent product quality, process intensification, and real-time control. As part of the PAT strategy, Raman spectroscopy offers many benefits and is used successfully in bioprocessing from single-cell analysis to cGMP process control. Since first introduced in 2011 for industrial bioprocessing applications, Raman has become a first-choice PAT for monitoring and controlling upstream bioprocesses because it facilitates advanced process control and enables consistent process quality. This paper will discuss new frontiers in extending these successes in upstream from scale-down to commercial manufacturing. New reports concerning the use of Raman spectroscopy in the basic science of single cells and downstream process monitoring illustrate industrial recognition of Raman’s value throughout a biopharmaceutical product’s lifecycle. Finally, we draw upon a nearly 90-year history in biological Raman spectroscopy to provide the basis for laboratory and in-line measurements of protein quality, including higher-order structure and composition modifications, to support formulation development. Graphical abstract
Recent Advances in Spontaneous Raman Spectroscopic Imaging: Instrumentation and Applications

Nan Wang,Honghao Cao,Lin Wang,Feng Ren,Qi Zeng,Xinyi Xu,Jimin Liang,Yonghua Zhan,Xueli Chen

DOI: https://doi.org/10.2174/0929867326666190619114431

IF: 4.74

2020-11-04

Current Medicinal Chemistry

Abstract:Background: Spectroscopic imaging based on the spontaneous Raman scattering effects can provide unique fingerprint information in relation to the vibration bands of molecules. Due to its advantages of high chemical specificity, non-invasive detection capability, low sensitivity to water, and no special sample pretreatment, Raman Spectroscopic Imaging (RSI) has become an invaluable tool in the field of biomedicine and medicinal chemistry. Methods: There are three methods to implement RSI, including point scanning, line scanning and wide-field RSI. Point-scanning can achieve two-and three-dimensional imaging of target samples. High spectral resolution, full spectral range and confocal features render this technique highly attractive. However, point scanning based RSI is a time-consuming process that can take several hours to map a small area. Line scanning RSI is an extension of point scanning method, with an imaging speed being 300-600 times faster. In the wide-field RSI, the laser illuminates the entire region of interest directly and all the images then collected for analysis. In general, it enables more accurate chemical imaging at faster speeds. Results: This review focuses on the recent advances in RSI, with particular emphasis on the latest developments on instrumentation and the related applications in biomedicine and medicinal chemistry. Finally, we prospect the development trend of RSI as well as its potential to translation from bench to bedside. Conclusion: RSI is a powerful technique that provides unique chemical information, with a great potential in the fields of biomedicine and medicinal chemistry.

pharmacology & pharmacy,biochemistry & molecular biology,chemistry, medicinal
Digital colloid-enhanced Raman spectroscopy for the pharmacokinetic detection of bioorthogonal drugs

Xinyuan Bi,Zhicheng He,Zhewen Luo,Wensi Huang,Xingxing Diao,Jian Ye

DOI: https://doi.org/10.1039/d4sc02553a

2024-08-02

Abstract:Bioorthogonal drug molecules are currently gaining prominence for their excellent efficacy, safety and metabolic stability. Pharmacokinetic study is critical for understanding their mechanisms and guiding pharmacotherapy, which is primarily performed with liquid chromatography-mass spectrometry as the gold standard. For broader and more efficient applications in clinics and fundamental research, further advancements are especially desired in cheap and portable instrumentation as well as rapid and tractable pretreatment procedures. Surface-enhanced Raman spectroscopy (SERS) is capable of label-free detection of various molecules based on the spectral signatures with high sensitivity even down to a single-molecule level. But limited by irreproducibility at low concentrations and spectral interference in complex biofluids, SERS hasn't been widely applied for pharmacokinetics, especially in live animals. In this work, we propose a new method to quantify bioorthogonal drug molecules with signatures at the spectral silent region (SR) by the digital colloid-enhanced Raman spectroscopy (dCERS) technique. This method was first validated using 4-mercaptobenzonitrile in a mixture of analogous molecules, exhibiting reliable and specific identification capability based on the unique SR signature and Poisson-determined quantification accuracy. We further developed a single-step serum pretreatment method and successfully profiled the pharmacokinetic behavior of an anticancer drug, erlotinib, from animal studies. In a word, this method, superior in sensitivity, controllable accuracy, minimal background interference and facile pretreatment and measurement, promises diverse applications in fundamental studies and clinical tests of bioorthogonal drug molecules.

Innovative Approaches for Drug Discovery: Quantifying Drug Distribution and Response with Raman Imaging

Subcellular Tracking of Deuterated Drugs by Stimulated Raman Scattering Microscopy

Raman mapping of pharmaceuticals

Research Progress of Raman Spectroscopy and Raman Imaging in Pharmaceutical Analysis.

Quantitative chemometric phenotyping of three-dimensional liver organoids by Raman spectral imaging

New techniques in antibiotic discovery and resistance: Raman spectroscopy

Comparison of Raman and Near-Infrared Chemical Mapping for the Analysis of Pharmaceutical Tablets

Raman Spectroscopy of Seized Drugs and Density Functional Theory Interpretation

Non-destructive Raman Method Development for Quantifying Active Pharmaceutical Ingredient in an Oral Suspension Through Plastic Dosing Syringes

Research Progress of Raman Spectroscopy and Imaging Techniques for the Pharmaceutical Analysis

A Non-destructive Quantitative Transmission Raman Spectroscopy Method for Active Pharmaceutical Ingredient in Drug Product In-Use Samples Prepared in Dosing Vehicles

An Expandable Mechanopharmaceutical Device (3): a Versatile Raman Spectral Cytometry Approach to Study the Drug Cargo Capacity of Individual Macrophages

Confocal UV and resonance Raman microscopic imaging of pharmaceutical products

Unsupervised data driven approaches to Raman imaging through a multimode optical fiber

Establishment of a Method for the Introduction of Poorly Water-Soluble Drugs in Cells and Evaluation of Intracellular Concentration Distribution Using Resonance Raman Imaging

Advances in Raman spectroscopy and imaging for biomedical research

Quantitative chemical sensing of drugs in scattering media with Bessel beam Raman spectroscopy

Quantitation of active pharmaceutical ingredient through the packaging using Raman handheld spectrophotometers: A comparison study

The role of Raman spectroscopy in biopharmaceuticals from development to manufacturing

Recent Advances in Spontaneous Raman Spectroscopic Imaging: Instrumentation and Applications

Digital colloid-enhanced Raman spectroscopy for the pharmacokinetic detection of bioorthogonal drugs