Model free based finite time fault‐tolerant control of robot manipulators subject to disturbances and input saturation

Zhengsheng Chen,Xue‐song Wang,Yuhu Cheng

DOI: https://doi.org/10.1002/rnc.6093

IF: 3.8973

2022-03-07

International Journal of Robust and Nonlinear Control

Abstract:International Journal of Robust and Nonlinear Control, EarlyView.

automation & control systems,engineering, electrical & electronic,mathematics, applied

What problem does this paper attempt to address?

Fuzzy Disturbance Observers-based Adaptive Fault-tolerant Control for an Uncertain Constrained Automatic Flexible Robotic Manipulator

Yong Ren,Yaobin Sun,Lei Liu

DOI: https://doi.org/10.1109/tfuzz.2023.3319392

IF: 12.253

2023-01-01

IEEE Transactions on Fuzzy Systems

Abstract:The article investigates an adaptive fault-tolerant control problem of an automatic flexible robotic manipulator (AFRM) subject to system uncertainties, actuator faults and saturations, and disturbances. By integrating fuzzy logic systems, projection functions, and two novel fuzzy disturbance observers (FDOs) designed for the position and angular loop subsystems, a new adaptive fault-tolerant control scenario is adopted to ensure semi-global uniform ultimate boundedness for the AFRM. With the introduced control scheme, the oscillation amplitude and angular-displacement tracking error remain within compact sets. At last, simulation results are used to verify the rationality and validity of the developed control strategy

computer science, artificial intelligence,engineering, electrical & electronic
Finite Time Fault Tolerant Control for Robot Manipulators Using Time Delay Estimation and Continuous Nonsingular Fast Terminal Sliding Mode Control

Mien Van,Shuzhi Sam Ge,Hongliang Ren

DOI: https://doi.org/10.1109/tcyb.2016.2555307

IF: 11.8

2017-07-01

IEEE Transactions on Cybernetics

Abstract:In this paper, a novel finite time fault tolerant control (FTC) is proposed for uncertain robot manipulators with actuator faults. First, a finite time passive FTC (PFTC) based on a robust nonsingular fast terminal sliding mode control (NFTSMC) is investigated. Be analyzed for addressing the disadvantages of the PFTC, an AFTC are then investigated by combining NFTSMC with a simple fault diagnosis scheme. In this scheme, an online fault estimation algorithm based on time delay estimation (TDE) is proposed to approximate actuator faults. The estimated fault information is used to detect, isolate, and accommodate the effect of the faults in the system. Then, a robust AFTC law is established by combining the obtained fault information and a robust NFTSMC. Finally, a high-order sliding mode (HOSM) control based on super-twisting algorithm is employed to eliminate the chattering. In comparison to the PFTC and other state-of-the-art approaches, the proposed AFTC scheme possess several advantages such as high precision, strong robustness, no singularity, less chattering, and fast finite-time convergence due to the combined NFTSMC and HOSM control, and requires no prior knowledge of the fault due to TDE-based fault estimation. Finally, simulation results are obtained to verify the effectiveness of the proposed strategy.

automation & control systems,computer science, cybernetics, artificial intelligence
Adaptive Fuzzy Event-Triggered Control for Single-Link Flexible-Joint Robots With Actuator Failures

Shuzhen Diao,Wei Sun,Shun-Feng Su,Jianwei Xia

DOI: https://doi.org/10.1109/tcyb.2021.3049536

IF: 11.8

2021-01-01

IEEE Transactions on Cybernetics

Abstract:This article studies the finite-time tracking control problem for the single-link flexible-joint robot system with actuator failures and proposes an adaptive fuzzy fault-tolerant control strategy. More precisely, the issue of "explosion of complexity" is successfully solved by incorporating the command filtering technology and the backstepping method. The unknown nonlinearities are identified with the help of the fuzzy logic system. An event-triggered mechanism with the relative threshold strategy is exploited to save communication resources. Furthermore, the proposed control design can guarantee that the tracking error converges to a small neighborhood of origin within a finite time by taking full advantage of the finite-time stability theory. Finally, the simulation example is presented to further verify the validity of the proposed control method.

automation & control systems,computer science, cybernetics, artificial intelligence
Disturbance‐observer‐based fault‐tolerant control of robotic manipulator: A fixed‐time adaptive approach

Zeeshan Anjum,Zhe Sun,Bo Chen

DOI: https://doi.org/10.1049/cth2.12672

IF: 2.67

2024-05-01

IET Control Theory and Applications

Abstract:In this study, a novel composite fixed‐time trajectory tracking control for a robotic manipulator in the presence of lumped disturbance, including uncertainties, external disturbances, and actuator faults, is developed. The proposed approach is created based on combining a fixed‐time non‐singular fast terminal sliding mode controller and a fixed‐time adaptive sliding mode observer. The concurrent existence of model uncertainties, external disturbances, and actuator faults in a nonlinear system such as a robotic manipulator can significantly affect the trajectory tracking performance of these systems. Therefore this study is devoted to proposing a control approach based on fixed‐time control theory to improve the trajectory tracking performance of the robotic manipulator in the presence of lumped disturbance, including uncertainties, external disturbances, and actuator faults. The control approach in this paper is designed based on the integration of a fixed‐time adaptive sliding mode observer and a fixed‐time non‐singular fast terminal sliding mode control design strategy. Firstly, a new fixed‐time adaptive sliding mode observer is designed based on fixed‐time theory and adaptive control theory to estimate the lumped disturbance present in the system. Then, using the information from the disturbance observer, the fixed‐time non‐singular fast terminal sliding mode control is devised based on a non‐singular fixed‐time sliding surface and a fixed‐time reaching approach. Furthermore, in the sense of the Lyapunov theorem, through rigorous analysis, it is demonstrated that the tracking errors of the closed‐loop system converge to a small neighbourhood within a fixed time, regardless of the information about the initial conditions of the states of the system. Finally, extensive comparative simulations are performed using the PUMA560 robot to manifest the feasibility and validity of the proposed control strategy in terms of trajectory tracking accuracy and fast convergence in the presence of uncertainties, disturbances, and actuator faults.

automation & control systems,engineering, electrical & electronic,instruments & instrumentation
Virtual-Sensor-Based Model-Free Adaptive Fault-Tolerant Constrained Control for Discrete-Time Nonlinear Systems

Weiming Zhang,Dezhi Xu,Bin Jiang,Peng Shi

DOI: https://doi.org/10.1109/tcsi.2022.3189221

2022-01-01

IEEE Transactions on Circuits and Systems I Regular Papers

Abstract:Intending to address the issue of sensor fault-tolerant control, a model-free adaptive fault-tolerant constrained control strategy is proposed with virtual sensor technology. The novel introduction of observer-based model-free adaptive control to fault-tolerant control brings benefits to the nonlinear systems with unknown dynamics in the presence of sensor faults. In the design procedures, the dynamic linearization technique is utilized first to establish the equivalent linear model of nonlinear systems. Then, the virtual sensor technology is introduced by designing the novel state-observer-based estimation algorithm to fulfill the data-driven system dynamic and sensor fault modeling. Besides, the broad learning technique is employed with offline training to provide output information for observer-based data-driven modeling under the fault case. Based on the data-driven model, the fault-tolerant constrained control scheme is explored with the anti-windup compensator against input constraints caused by actuator saturation, and the stability analysis is supplied. Finally, the simulations are carried out for both affine and non-affine nonlinear systems to manifest the effectiveness and superiority of the proposed control strategy.
Robust free‐time‐stable fault tolerant control for rigid satellite attitude system with output constraint

Zepeng Zhou,Fanglai Zhu,Dezhi Xu,Shenghui Guo,Tianyi Liu,Xiandong Li

DOI: https://doi.org/10.1002/rnc.5703

IF: 3.8973

2021-07-22

International Journal of Robust and Nonlinear Control

Abstract:This article investigates the robust fault tolerant control strategy for a rigid satellite attitude system with external disturbance and actuator fault while the predesigned output constraint is taken into consideration. Based on the interval observer technique, an identical faulty signal reconstruction is first realized by utilizing pure mathematical calculation. Then, to guarantee the desired output constraint, the proposed prescribed performance fault tolerant control framework is constructed with a novel error interval representation which not only reduces the computation burden but also simplifies the output constrained controller design. In addition, by comparing with the existing finite/fixed time control method, the setting time for this control strategy can be assigned freely. The stability of the whole method is guaranteed by Lyapunov method. Finally, simulation results including comparisons with existing work show the effectiveness and advantages of the proposed approach.

automation & control systems,engineering, electrical & electronic,mathematics, applied
Finite-Time Fuzzy Fault-Tolerant Control for Nonlinear Flexible Spacecraft System with Stochastic Actuator Faults

Jiao Xu,Tao Song,Jiaxin Wang

DOI: https://doi.org/10.3390/math12040503

IF: 2.4

2024-02-07

Mathematics

Abstract:In the quest for unparalleled reliability and robustness within control systems, significant attention has been directed toward mitigating actuator faults in diverse applications, from space vehicles to sophisticated industrial systems. Despite these advances, the prevalent assumption of homogeneous actuator faults remains a stark simplification, failing to encapsulate the stochastic and unpredictable nature of real-world operational environments. The problem of finite-time fault-tolerant control for nonlinear flexible spacecraft systems with actuator faults is addressed in this paper, utilizing the T-S fuzzy framework. In a departure from conventional approaches, actuator failures are modeled as random signals following a nonhomogeneous Markov process, thus comprehensively addressing the issue of timeliness, which has previously been overlooked in the literature. To effectively manage the intricacies introduced by these factors, the nonhomogeneous Markov process is represented as a polytope set. The proposed solution involves the development of a nonhomogeneous matrix transformation, accompanied by the introduction of adaptable parameters. This innovative controller design methodology yields a stability criterion that ensures H∞ performance in a mean-square sense. To empirically substantiate the effectiveness and advantages of the proposed approaches, a numerical example featuring a nonlinear spacecraft system is presented.

mathematics
Adaptive Compensation for Infinite Number of Actuator Faults and Time-varying Delay of a Flexible Manipulator System

Yonghao Ma,Xiuyu He,Shuang Zhang,Yongbin Sun,Qiang Fu

DOI: https://doi.org/10.1109/tie.2021.3139193

IF: 7.7

2022-01-01

IEEE Transactions on Industrial Electronics

Abstract:This article addresses a novel adaptive compensation strategy for a flexible manipulator in the presence of unmodeled system dynamics and an infinite number of time-varying actuator faults. Differing from the existing results, the unmodeled system dynamics are represented by a nonlinear time-varying delay function, which is tackled with the aid of neural network technique and LyapunovKrasovskii function. By introducing the projection technique and a piecewise Lyapunov function, a fault-tolerant control method is proposed, the uniformly ultimate boundedness of the closed-loop system is ensured, and the number of actuator faults is allowed to be infinite. Simulation and physical experiment results show that the manipulator can track the desired angle and the vibration can be suppressed effectively under the proposed scheme for the system with uncertainties and actuator faults.

automation & control systems,engineering, electrical & electronic,instruments & instrumentation
Adaptive Robust Actuator Fault-Tolerant Control in Presence of Input Saturation

Shreekant Gayaka,Bin Yao

DOI: https://doi.org/10.1109/acc.2011.5991371

2011-01-01

Abstract:In this article, we solve the problem of unknown actuator fault accommodation for a class of uncertain nonlinear systems, with explicit consideration of input saturation. A review of the existing literature reveals that fault-tolerant controllers are often designed without any regard to actuator saturation, and it is assumed that they will not saturate in spite of faults. In reality, however, considerable amount of control effort needs to be expended for suppressing the transients due to actuator faults, which can easily saturate the working actuators. In the present work, an indirect adaptive robust fault-tolerant controller is proposed which explicitly takes into account the actuator limits. Furthermore, the indirect design ensures that adaptation mechanism is not affected adversely due to actuator saturation. Finally, simulation studies performed on a nonlinear hypersonic aircraft model are presented to demonstrate the effectiveness of the proposed scheme in dealing with actuator faults in presence of input saturation.
Command Filter-Based Adaptive Fault-Tolerant Fast Finite-Time Control of Manipulator Systems with Actuator Faults

Chen, Ming,Jiao, Xiaoxuan

DOI: https://doi.org/10.1007/s40815-024-01785-1

IF: 4.085

2024-09-10

International Journal of Fuzzy Systems

Abstract:The issue of command filter-based fault-tolerant fast finite-time control is explored for manipulator systems with actuator faults. By using finite-time control and a finite-time command filter, all the signals in the closed-loop system are bounded and converge to the bounded regions in finite time. In addition, the problems of complicated calculation and influence of filtering errors are solved by the introduction of the finite-time command filter and a compensation mechanism. It is especially emphasized that the main contribution of this paper is as follows: (1) Several advanced control methods are integrated, which takes into account the speed, reliability, and adaptability of the controlled system. (2) In the last step of the design based on backstepping, an intermediate variable is designed which can simplify the proposed control algorithm. In the end, with the help of a numerical simulation example, it is shown that better transient/steady state performance and the fast finite-time stability of the closed-loop system can be obtained. As a result, it is concluded that our scheme is effective.

computer science, information systems,automation & control systems, artificial intelligence
Decentralized fault-tolerant control of modular robot manipulators with actuator saturation: neural adaptive integral terminal sliding mode-based control approach

Zengpeng Lu,Yuanchun Li,Xirui Fan,Qingyun Wang,Yan Li

DOI: https://doi.org/10.1007/s40747-023-01142-z

IF: 6.7

2023-07-07

Complex & Intelligent Systems

Abstract:Abstract A novel neural adaptive integral terminal sliding mode control for decentralized fault-tolerant control strategy, including the integral terminal sliding mode surface, the nonlinear disturbance observer, the radial basis neural network and robust controller, is presented in this paper to achieve fault-tolerant control of modular robot manipulators. First, the integral terminal sliding mode is designed for the fault-tolerant controller. Then, to boost the performance of the controlled system, the radial basis neural network and disturbance observer are introduced to approximate the nonlinear terms and disturbances. The reconstructed approximate uncertainty term is applied as compensation. Next, the super-twisting technique is employed to compensate for estimation errors to ensure stability. In addition, for the actuator saturation problem, the radial basis function neural network-based compensation control is proposed. Finally, the stability of the closed-loop robotic system is demonstrated based on Lyapunov theory. Computer simulations verified the efficiency and advantages of the presented approach.

computer science, artificial intelligence
Finite-time control for robot manipulators

Yiguang Hong,Yangsheng Xu,Jie Huang

DOI: https://doi.org/10.1016/s0167-6911(02)00130-5

2002-07-01

Abstract:Finite-time control of the robot system is studied through both state feedback and dynamic output feedback control. The effectiveness of the proposed approach is illustrated by both theoretical analysis and computer simulation. In addition to offering an alternative approach for improving the design of the robot regulator, this research also extends the study of the finite-time control problem from second-order systems to a large class of higher order nonlinear systems.

automation & control systems,operations research & management science
Type-2 fuzzy adaptive robust fault-tolerant control for manipulators with disturbance observer

Yongqing Fan,Yanlong Zhang,Zhen Li

DOI: https://doi.org/10.1177/01423312241282059

IF: 2.146

2024-11-23

Transactions of the Institute of Measurement and Control

Abstract:Transactions of the Institute of Measurement and Control, Ahead of Print. A configuration of interval type-2 (IT2) fuzzy adaptive fault-tolerant control strategy is designed for the position trajectory tracking of cooperated robot manipulators carrying a common object. First, a non-zero time-varying parameter is installed in IT2 FLS, then a property of universal approximation of IT2 fuzzy logic system (FLS) is proposed, where the non-zero time-varying parameter has the relation with the approximation precision of IT2 FLS. Second, for the unknown compounded disturbance, a disturbance observer is designed to estimate it and is integrated into the IT2 adaptive control. To improve the approximation accuracies, the novel IT2 FLSs with non-zero parameter are utilized to compensate for the uncertain nonlinear terms with including the uncertainties and fault components in the system, the fault-tolerant control with some adaptive laws are established using the stability theory of barrier Lyapunov function (BLF), where the approximation accuracies can be modified online using the provided adaptive laws with neglecting the number of fuzzy rules, the computation burden of the proposed control is greatly reduced because of a small number of updated laws. Finally, the simulation results are compared with those of several existing control methods, which confirms the validity of the designed control approach.

automation & control systems,instruments & instrumentation
Fault Tolerant Control of Feedback Linearizable Systems with Stuck Actuators

Min Wang,Donghua Zhou

DOI: https://doi.org/10.1002/asjc.8

IF: 2.4

2008-01-01

Asian Journal of Control

Abstract:Fault tolerant control of feedback linearizable systems with stuck actuators is studied in this paper. Once stuck, the faulty actuators cannot respond to the control inputs and have fixed constant outputs. The fault considered here is severe in the sense that the faulty system is no longer feedback linearizable. By constructing a nonlinear transformation and extending Chen's disturbance observer to a multi‐dimensional case, a generalized disturbance observer is developed for estimating the unknown constant outputs of the faulty actuators. Then, through integrating the generalized disturbance observer with a controller constructed by the famous cascade design method, a fault tolerant controller is obtained. It is proven that the fault tolerant controller ensures not only boundedness of the state of the faulty system but also satisfactory output performance. Finally, computer simulations are done using an inverted pendulum model to verify the effectiveness of the proposed method. Copyright © 2008 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society
Robust Adaptive Fixed-Time Sliding-Mode Control for Uncertain Robotic Systems With Input Saturation

Yunsong Hu,Huaicheng Yan,Hao Zhang,Meng Wang,Lu Zeng

DOI: https://doi.org/10.1109/tcyb.2022.3164739

IF: 11.8

2022-01-01

IEEE Transactions on Cybernetics

Abstract:In this article, a robust adaptive fixed-time sliding-mode control method is proposed for robotic systems with parameter uncertainties and input saturation. First, a model-based fixed-time controller is designed under the premise that the system parameters are known. Moreover, the unknown dynamics of robotic systems and the boundary of compounded disturbance are synthesized into a compounded uncertainty. Then, the Gaussian radial basis function neural networks (NNs) are selected to approximate the compounded uncertainty. In addition, the nonsingular fast terminal sliding-mode (NFTSM) control is incorporated into the proposed fixed-time control framework to enhance the robustness and convergence speed of unknown robotic systems. Finally, a comparative simulation based on a rigid manipulator shows the superiority and efficacy of the designed methods.

automation & control systems,computer science, cybernetics, artificial intelligence
Distributed neural-based fault-tolerant control of multiple flexible manipulators with input saturations

Yu Liu,Xiangqian Yao,Wei Zhao

DOI: https://doi.org/10.1016/j.automatica.2023.111202

IF: 6.4

2023-07-24

Automatica

Abstract:This paper focuses on a novel fault-tolerant control design for networked flexible manipulators with actuator failures, input saturations, and external disturbances. Unlike the existing methods, the new control strategy has three characteristics. First, the second-order auxiliary system is used to eliminate the influence of input saturation. Second, by designing some proportional–integral (PI) auxiliary variables, the boundary dynamics of manipulators are reconstructed as some new second-order systems, where the nonlinear uncertainties are estimated by the adaptive radial basis neural networks (RBFNNs) and the compound disturbances are compensated by the adaptive method. Third, a boundary local angle interaction protocol is given under a digraph. Then combining the virtual control and Lyapunov design, some novel distributed fault-tolerant control algorithms are obtained to ensure that the vibration states and the angle consensus error are uniformly ultimately bounded. Finally, numerical simulations are provided to show the effectiveness of these control algorithms.

automation & control systems,engineering, electrical & electronic
Disturbance Observer-Based Adaptive Fault Tolerant Control with Prescribed Performance of a Continuum Robot

Shoulin Xu

DOI: https://doi.org/10.3390/act13070267

IF: 2.6

2024-07-15

Actuators

Abstract:This paper studies an adaptive fault tolerant control (AFTC) scheme for a continuum robot subjected to unknown actuator faults, dynamics uncertainties, unknown disturbances, and prescribed performance. Specifically, to deal with uncertainties, a function approximation technique (FAT) is employed to evaluate the unknown actuator faults and uncertain dynamics of the continuum robot. Then, a nonlinear disturbance observer (DO) is developed to estimate the unknown compounded disturbance, which contains the unknown disturbances and approximation errors of the FAT. Furthermore, the prescribed error bound is treated as a time-varying constraint, and the controller design method is based on an asymmetric barrier Lyapunov function (BLF), which is operated to strictly ensure the steady-state and transient performance of the continuum robot. Afterwards, the simulation results validate the effectiveness of the proposed AFTC in dealing with the unknown actuator faults, uncertainties, unknown disturbances, and prescribed performance. Finally, the effectiveness of the proposed AFTC scheme is verified through experiments.

engineering, mechanical,instruments & instrumentation
Finite-time decentralized non-fragile dissipative control for large-scale systems against actuator saturation

V Tharanidharan,R Sakthivel,Yong-Ki Ma,L Susana Ramya,S Marshal Anthoni

DOI: https://doi.org/10.1016/j.isatra.2019.01.020

Abstract:This paper employs linear matrix inequality-based optimization algorithm to establish finite-time boundedness and dissipativeness for a class of large-scale systems in the presence of actuator faults and actuator saturation. In addition, for the proposed system, a novel time-varying actuator fault model is incorporated in controller design, which is more general than the conventional actuator fault models. Specifically, by constructing a suitable Lyapunov-Krasovskii functional, a new set of sufficient conditions is derived, which ensures the finite-time boundedness with dissipativity of the considered large-scale systems. The main intention of this paper is to design a novel decentralized fault-tolerant controller to compensate simultaneously the actuator faults, actuator saturations and nonlinear interconnections. Finally, an example and its simulation study are presented to verify the effectiveness and potential of the proposed control design technique.
Fuzzy Adaptive Finite-Time Fault-Tolerant Control for Strict-Feedback Nonlinear Systems

Kangkang Sun,Lu Liu,Jianbin Qiu,Gang Feng

DOI: https://doi.org/10.1109/tfuzz.2020.2965890

IF: 12.253

2021-04-01

IEEE Transactions on Fuzzy Systems

Abstract:This article devotes to investigating the issue of fuzzy adaptive control for a class of strict-feedback nonlinear systems with nonaffine nonlinear faults. The computational complexity is reduced by adopting the dynamic surface control technique. Under the framework of finite-time stability, a novel fault-tolerant control strategy is designed so that the closed-loop system is semiglobally practically finite-time stable, and the tracking error converges to a small residual set in a finite time. Finally, simulation studies for an electromechanical system are shown to verify the feasibility of the presented approach.

computer science, artificial intelligence,engineering, electrical & electronic
Fixed-time disturbance observers-based fault-tolerant control for a class of nonlinear systems with prescribed performance

Le Liu Yueheng Sun Yinghao Xie Yiming Fang Key Lab of Intelligent Rehabilitation and Neuroregulation of Hebei Province,Yanshan University,Qinhuangdao City,People's Republic of China

DOI: https://doi.org/10.1080/00207179.2024.2391928

IF: 2.102

2024-08-22

International Journal of Control

Abstract:This paper explores the issue of fault-tolerant control for a class of nonlinear systems that encounter the actuator fault and external disturbances. The uncertainties arising from the actuator fault and external disturbances are treated as lumped uncertainties, and fixed-time observers are designed to observe them. The fault-tolerant controller with full-state constraints is then developed using the fixed-time backstepping method, integrating the Improved Prescribed Performance Function (IPPF) method and the Barrier Lyapunov Function (BLF) method. Additionally, command filters with error compensations are devised to resolve the 'explosion of complexity' problem during the controller derivation process. The parameters of the designed controller are optimised using the Northern Goshawk Optimization (NGO) algorithm to enhance nonlinear systems' dynamic performance. Lastly, the validity and practicality of the proposed approach are verified through the comparative study of simulations and experiments, with the permanent magnet synchronous motor (PMSM) position system employed as a case study.

automation & control systems

Model free based finite time fault‐tolerant control of robot manipulators subject to disturbances and input saturation

Fuzzy Disturbance Observers-based Adaptive Fault-tolerant Control for an Uncertain Constrained Automatic Flexible Robotic Manipulator

Finite Time Fault Tolerant Control for Robot Manipulators Using Time Delay Estimation and Continuous Nonsingular Fast Terminal Sliding Mode Control

Adaptive Fuzzy Event-Triggered Control for Single-Link Flexible-Joint Robots With Actuator Failures

Disturbance‐observer‐based fault‐tolerant control of robotic manipulator: A fixed‐time adaptive approach

Virtual-Sensor-Based Model-Free Adaptive Fault-Tolerant Constrained Control for Discrete-Time Nonlinear Systems

Robust free‐time‐stable fault tolerant control for rigid satellite attitude system with output constraint

Finite-Time Fuzzy Fault-Tolerant Control for Nonlinear Flexible Spacecraft System with Stochastic Actuator Faults

Adaptive Compensation for Infinite Number of Actuator Faults and Time-varying Delay of a Flexible Manipulator System

Adaptive Robust Actuator Fault-Tolerant Control in Presence of Input Saturation

Command Filter-Based Adaptive Fault-Tolerant Fast Finite-Time Control of Manipulator Systems with Actuator Faults

Decentralized fault-tolerant control of modular robot manipulators with actuator saturation: neural adaptive integral terminal sliding mode-based control approach

Finite-time control for robot manipulators

Type-2 fuzzy adaptive robust fault-tolerant control for manipulators with disturbance observer

Fault Tolerant Control of Feedback Linearizable Systems with Stuck Actuators

Robust Adaptive Fixed-Time Sliding-Mode Control for Uncertain Robotic Systems With Input Saturation

Distributed neural-based fault-tolerant control of multiple flexible manipulators with input saturations

Disturbance Observer-Based Adaptive Fault Tolerant Control with Prescribed Performance of a Continuum Robot

Finite-time decentralized non-fragile dissipative control for large-scale systems against actuator saturation

Fuzzy Adaptive Finite-Time Fault-Tolerant Control for Strict-Feedback Nonlinear Systems

Fixed-time disturbance observers-based fault-tolerant control for a class of nonlinear systems with prescribed performance