Abstract:In the conducted experiment, a transformative change in heat transfer rate and productivity was observed when copper oxide nanoparticles were mixed with petroleum jelly and stored in a copper cylinder within the solar still. The heat transfer rate increased by 20 %, and the daily productivity of the system seen a significant improvement, with a 20 % increase compared to a phase change material (PCM) system and 40 % simple solar still (SS). The dispersed nanoparticle created a modified internal microstructure, forming a network or aggregate structure depending on their concentration and dispersion quality. This modified microstructure significantly improved the efficiency of heat transfer pathways, leading to 20 % faster heat transfer. The novel approach employed in this experiment distinguished itself from traditional solar stills and PCM based system. The exceptional thermal conductivity of the nanoparticles facilitated rapid absorption of solar radiation, resulting in increased energy input to the system and accelerated evaporation processes. The simulation result obtained using Comsol Multiphysics 5.6 indicated that even under solar radiation condition equivalent to zero, the temperature distribution of the nanoparticles enhanced phase change material based solar still system favourable, and heat transfer was efficient. Under zero solar radiation conditions, the phase change material with nanoparticle in solar still system (NPCM) exhibited a temperature 56.9 °C at 19.00 PM in the experimental condition and, in the simulation it has been found 56.1 °C respectively. The simulation results closely aligned with the experimental results. The daily productivity of the PCM and NPCM based homogeneous systems have been found to be 2945 and 4075 mL/m 2 -day higher, respectively, compared to simple solar still (SS) productivity 2120 mL/m 2 -day. Based on these experimental findings, it can be concluded that the NPCM system is more effective than the PCM based and simple solar still system. This can be attributed to the increased thermal conductivity, enhanced heat transfer rate, and improved evaporation rate achieved through the integration of copper oxide nanoparticles. Therefore, in regions with limited access to portable water, the NPCM system proves to be a highly useful and economically viable solution.

Exergo and enviro-economic analysis of thermal energy storage assisted finned solar still

Experimental investigations of a novel solar still with heat storage materials - energy, exergy, economic and environmental analyses

Enhancing the performance of double-slope solar still using nano-enhanced eutectic phase change materials and steel wool fibre as wick material

Productivity enhancement of single-slope solar still with novel bottom finned absorber basin inserted in phase change material (PCM): techno-economic and enviro-economic analysis

Simulation and experimental analysis of PCM-enhanced solar stills using CMS

CFD simulation of modified solar still for effective condensation and evaporation: energy and exergy analysis

A novel energy storage system for latent heat recovery in solar still using phase change material and pulsating heat pipe

Improved solar still productivity using PCM and nano- PCM composites integerated energy storage

Energy, exergy, economic and enviro-economic (4E) analysis of gravel coarse aggregate sensible heat storage-assisted single-slope solar still

Numerical study of PCM-integrated solar still efficiency enhancement

Theoretical assessment of a solar still system equipped with Nano-phase change materials

Numerical and experimental investigations on melting heat transfer performance of PCM in finned cold thermal energy storage

Analyzing solar still performance with PV electricity storage: Energy, exergy, exergoeconomic, and enviroeconomic perspectives

Performance comparison of two PCM candidates for new concept of compact thermal storage in solar DHW systems

CFD simulation of a solar collector integrated with PCM thermal storage

Improving solar still efficiency with nanoparticles – Infused copper cylinders and latent heat storage: An experimental and simulation study

Improved Performance of Latent Heat Energy Storage Systems in Response to Utilization of High Thermal Conductivity Fins

Energy, exergy, and economic analysis of solar still using coal cylinder fins: an experimental study

Performance assessment of single slope solar still by the incorporation of palm flower powder and micro phase change material for the augmentation of productivity

Feasibility assessment of a stepped solar still integrated with hexagram fin: an experimental and numerical approach toward sustainability

Optimizing the thermal performance and heat losses of self-stored U-tube based ETC for residential water heating applications: A combined experimental and theoretical approach