Abstract:The thermal hydraulic characteristics in the vacuum vessel (VV) of a fusion reactor under an ingress of coolant event (ICE) and a loss of vacuum event (LOVA) were investigated quantitatively using preliminary experimental apparatuses. In the ICE experiments, pressure rise characteristics in the VV were clarified for experimental parameters of the wall temperature and water temperature and for cases with and without a blowdown tank. In addition, the functional performance of a blowdown tank with and without a water cooling system was examined and it was confirmed that the blowdown tank with a water cooling system is effective for suppressing the pressure rise during the ICE. In the LOVA experiments, the saturation time in the VV from vacuum to atmosphere was investigated for various breach sizes and it was found that the saturation time is in inverse proportion to the breach size. In addition, the characteristics of exchange flow through breaches were clarified for the different breach positions on the VV. It was proven from the experimental results that the exchange flow became a counter-current flow when the breach was positioned on the top of the VV and a stratified flow when it was formed on the side wall of the VV, and that the exchange flow under the stratified flow condition was smoother than that of counter-current flow. On the basis of these results, the severest breach condition in ITER was changed from the top-break case to the side-break case. To predict with high accuracy the thermal hydraulic characteristics during ICEs and LOVAs under ITER conditions, a large scale test facility will be necessary. The current conceptual design of the combined ICE-LOVA test facility with a scaling factor of 1/1000 in comparison with the ITER volume is presented.

Final design analysis of the optical hinge of the wide angle viewing system for ITER equatorial port 12

Final opto-mechanical design of ex-vessel components for the Wide Angle Viewing System diagnostic for ITER Equatorial Port 12

Design Evolution and Integration of the ITER In-Vessel Components

Structural Integrity Analysis for Final Design of ITER Gas Fueling Manifold

Optical design study of an infrared visible viewing system for Wendelstein 7-X divertor observation and control

Thermal Hydraulic Characteristics During Ingress of Coolant and Loss of Vacuum Events in Fusion Reactors

Design and analysis of the Agile Robot Transporter for ITER in-vessel maintenance

Proposal of Integrated Test Facility for in-Vessel Thermofluid Safety of Fusion Reactors

Nuclear analyses for the integration of ITER equatorial Port 2

Nuclear analysis and shielding optimisation in support of the ITER In-Vessel Viewing System design

Design Progress of Structural Components of the EU DEMO EC Equatorial Launcher

The diagnostic rack design and the functional demonstration of the locking mechanism for ITER diagnostic lower port integrations

Neutronics Analysis of the ITER In-Vessel Viewing System

Design of a mechanically actuated RF grounding system for the ITER ICRH antenna

Assembly of ITER blanket module to vacuum vessel experimental investigations

Preliminary Control-Oriented Modeling of the ITER Steering Mirror Assembly and Local Control System in the Electron Cyclotron Heating & Current Drive Actuator

Electromagnetic analysis on conceptual design of the EU DEMO EC equatorial laucher

Progress on design and R&D of ITER FW/blanket

Preliminary sensitivity analysis for an ex-vessel LOCA without plasma shutdown for the EU DEMO WCLL blanket concept

Design of Asymmetrically Loaded End-Plates with Vacuum Seal Surfaces for the Navy Prototype Optical Interferometer

Final Design of ITER In-Vessel Coils and Manufacturing of In-Vessel Coil Conductor