Abstract:Abstract As a hyperspectral imager aboard the orbiter “HX-1” of China’s first Mars mission, the Mars Mineralogical Spectrometer (MMS) is designed with hyperspectral and multispectral operation modes to survey the mineral types and their distribution on the surface of Mars, and to study the overall chemical composition and evolution history of Mars. The multispectral modes of MMS are different from hyperspectral modes on the bands selection, spatial and spectral resolution, Signal-to-Noise Ratio (SNR) etc. So the spectral detection capability of each mode of MMS is also different. The ground validation experiment of MMS is conducted to evaluate the hyperspectral and multispectral data quality and detection capabilities. The main conclusions include: (1) The measured hyperspectra of typical mineral samples obtained by MMS agree well with the data acquired by the Standard Comparison Spectrometers (SCS) under the same measurement conditions, and the spectral uncertainty between MMS and SCS is less than 7% in the key spectral ranges ( $0.7\sim2.2~\upmu \text{m}$ 0.7 ∼ 2.2 μm ). For some typical minerals, the absorption band positions deviation between MMS and SCS are within $0.69\sim14.86~\text{nm}$ 0.69 ∼ 14.86 nm , which are within the spectral resolution limits of MMS. (2) The six sets of band combinations designed for MMS multispectral modes are slightly superior to CRISM’s multispectral mode in terms of spectral resolutions and bands selection, the water-containing minerals will be more accurately distinguished and identified, such as montmorillonite and kaolinite. Besides, the SNR of each multispectral mode is greater than 400 in the 500–2600 nm spectral range, which meets the requirements for the subtle spectral characteristics of water-containing minerals. (3) Benefiting from the MMS ground validation experiment and the experience of the OMEGA and CRISM, it is recommended that MMS first adopt the spatial continuous 52-sample or 104-sample (spatial resolution is about $0.53\sim1.06~\text{km}$ 0.53 ∼ 1.06 km ) multispectral operation mode for typical minerals global mapping and finding target areas of interest. Then the 208-sample multispectral mode (spatial resolution is about $\sim265~\text{m}$ ∼ 265 m ) or 26-sample hyperspectral mode can be used to survey target areas of interest for the subtle mineral types characteristics and distribution. At last, 26-sample hyperspectral mode could be used to monitor the atmospheric composition of Mars by limb observations.

Initial In-Flight Spectral Calibration of the Near-Infrared Spectra Acquired by the MarSCoDe Onboard the Zhurong Rover

The MarSCoDe Instrument Suite on the Mars Rover of China’s Tianwen-1 Mission

Alkali Trace Elements Observed by MarSCoDe LIBS at Zhurong Landing Site on Mars: Quantitative Analysis and Its Geological Implications

Development and Testing of the MarSCoDe LIBS Calibration Target in China's Tianwen-1 Mars Mission

Along-track Calibration of the Zhurong Rover Magnetometer

A reflectance calibration method for Multispectral Camera (MSCam) on the Zhurong rover

Design and Ground Verification for Multispectral Camera on the Mars Tianwen-1 Rover

In situ analysis of surface composition and meteorology at the Zhurong landing site on Mars

Spectral Background Calibration of Scanning Habitable Environments with Raman and Luminescence for Organics and Chemicals (SHERLOC) Spectrometer Onboard the Perseverance Rover Enables Identification of a Ubiquitous Martian Spectral Component

Design and material selection of optomechanical systems for the extreme environment on Mars

Investigation into the Affect of Chemometrics and Spectral Data Preprocessing Approaches upon Laser-Induced Breakdown Spectroscopy Quantification Accuracy Based on MarSCoDe Laboratory Model and MarSDEEP Equipment

Detection of allophane by the Zhurong rover indicates water-limited alteration at Utopia Planitia, Mars

Dust Deposition at Zhurong Landing Site From Multispectral Camera Observations

Comparison on Quantitative Analysis of Olivine Using MarSCoDe Laser-Induced Breakdown Spectroscopy in a Simulated Martian Atmosphere

A Mars Environment Chamber Coupled with Multiple In Situ Spectral Sensors for Mars Exploration

On-Orbit Vicarious Radiometric Calibration and Validation of ZY1-02E Thermal Infrared Sensor

Geomorphic contexts and science focus of the Zhurong landing site on Mars

Primary Analysis of Mars Geological Structure Based on High Frequency Radar Data of China's Zhurong Mars Rover

Design and development of a stand-off Raman brassboard (SDU-RRS) for the spectroscopic study of planetary materials

dsDusty Mafic Rocks Along the Path of Chang'E‐4 Rover: Initial Analysis of the Image Cubes of the Onboard Visible and Near‐infrared Imaging Spectrometer

Ground Validation Experiment and Spectral Detection Capability Evaluation of Mars Mineralogical Spectrometer (MMS) Aboard HX-1 Orbiter