Abstract:The ectoine (ET) additive with the hydrogen bond enhancement effect can impede proton transfer, thus effectively inhibiting the hydrogen evolution reaction and its induced side reactions, reducing surface heterogeneity to facilitate uniform Zn2+ deposition. The Zn//Zn symmetric cell using the electrolyte with ET delivers an ultra‐long cycle life of 5700 h at 1 mA cm−2/1 mAh cm−2 while maintaining fast reaction kinetics. The high activity of water molecules induces notorious side reactions that seriously impair the stability of the Zn metal anode. Inspired by the mechanism of proton transfer in an aqueous solution, ectoine (ET) with a kosmotropic effect is first introduced into the typical aqueous electrolyte of aqueous zinc‐ion batteries (ZIBs). The hydrogen bond enhancement brought by the ET additive increases the energy barrier for the reconfiguration of hydrogen bonds, thereby impeding the hopping transport of protons based on the Grotthuss mechanism. The inhibited hydrogen evolution reaction (HER) by impeded proton transfer is strongly proved by in situ electrochemical gas chromatography (EC‐GC). The distinctive hydrogen bond enhancement effect of ET results in remarkably improved Zn anode stability while maintaining fast reaction kinetics. Consequently, the Zn//Zn symmetric cell delivers an ultra‐long cycle life of 5700 h 1 mA cm−2/1 mAh cm−2 and 2000 h at 5 mA cm−2/5 mAh cm−2 with lower voltage hysteresis, extending a cycling life by >27 and 24 times without sacrificing reaction kinetics.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the side reactions of zinc metal anodes in aqueous electrolytes due to the high activity of water molecules, especially the hydrogen evolution reaction (HER). These side reactions seriously affect the stability of zinc metal anodes and the overall performance of batteries. Specifically, although zinc metal anodes have a high theoretical capacity and abundant material supply, due to their low reduction potential (-0.762 V vs standard hydrogen electrode), a competitive hydrogen evolution reaction (HER) is likely to occur on the surface. This not only increases the local pH value near the zinc metal surface, promotes the formation of alkaline by - products, but also reduces the Coulombic efficiency (CE) and accelerates the deterioration of the zinc anode. In addition, these side reactions exacerbate the non - uniformity of the zinc anode surface, promote the aggregation of zinc ions at highly active sites, form a non - uniform dendritic deposition morphology, and may eventually lead to the piercing of the separator and battery failure. To solve these problems, the researchers introduced an additive with a kosmotrope effect - ectoine (ET), which inhibits proton transfer by strengthening hydrogen bonds, thereby reducing the occurrence of the hydrogen evolution reaction. The introduction of ET significantly improves the stability of zinc nanostructures while maintaining rapid reaction kinetics. The experimental results show that in the electrolyte containing ET, the zinc symmetric battery achieved an ultra - long cycle life of 5,700 hours and 2,000 hours at 1 mA cm\(^{-2}\)/1 mAh cm\(^{-2}\) and 5 mA cm\(^{-2}\)/5 mAh cm\(^{-2}\) respectively, with lower voltage hysteresis, and the cycle life was extended by 27 times and 24 times respectively without sacrificing reaction kinetics. Even under the harsh condition of 10 mA cm\(^{-2}\)/10 mAh cm\(^{-2}\), it can cycle stably for 670 hours. In addition, using the optimized electrolyte, the Zn//Cu asymmetric battery achieved a high Coulombic efficiency of 99.6% during stable long - term cycling, and the Zn//MnO2 and Zn//NVO full batteries also achieved long - term stable cycle lives, demonstrating their potential for practical applications. Overall, this study reveals the mechanism of influencing the electrolyte by adjusting hydrogen bonds, significantly enhancing the stability of the zinc anode while maintaining high electrochemical activity, providing an innovative idea for the design of high - performance aqueous zinc - ion batteries.

Attenuating Water Activity Through Impeded Proton Transfer Resulting from Hydrogen Bond Enhancement Effect for Fast and Ultra‐Stable Zn Metal Anode

Helmholtz Plane Reconfiguration Enables Robust Zinc Metal Anode in Aqueous Zinc‐Ion Batteries

Suppressed Water Reactivity by Zincophilic‐Hydrophobic Electrolyte Additive for Superior Aqueous Zn Metal Batteries

Eutectic Electrolytes with Doubly‐Bound Water for High‐Stability Zinc Anodes

Stable Zn‐Metal Anode Enabled by Solvation Structure Modulation and In‐Situ SEI Layer Construction

Weak‐Water‐Coordination Electrolyte to Stabilize Zinc Anode Interface for Aqueous Zinc Ion Batteries

TEGDME Electrolyte Additive for High-performance Zinc Anodes

Ultrastable Zinc Anode by Simultaneously Manipulating Solvation Sheath and Inducing Oriented Deposition with PEG Stability Promoter.

Overpotential engineering enables dendrite-free zinc anode for high-performance zinc-ion batteries

Maintaining the concentration equilibrium of proton and hydroxide ions by construction of bis(2-aminoethyl)amine-based inner helmholtz plane toward long-life zinc metal anodes

Concurrent Regulation of Surface Topography and Interfacial Physicochemistry via Trace Chelation Acid Additives toward Durable Zn Anodes

Surface Protection and Interface Regulation for Zn Anode via 1‐Hydroxy Ethylidene‐1,1‐Diphosphonic Acid Electrolyte Additive toward High‐Performance Aqueous Batteries

Boosting Zn Anode Utilization by Trace Iodine Ions in Organic‐Water Hybrid Electrolytes Through Formation of Anion‐rich Adsorbing Layers

Self-assembled electrode-electrolyte interphase enabling highly reversible Zn metal anode for aqueous zinc batteries

Moisture-activated Deep Eutectic Electrolyte Enabling Stable Metal Zn Anode

Reversible Protonated Electrolyte Additive Enabling Dendrites‐Free Zn Metal Anode with High Depth of Discharge

Hydrated solvation suppression of zinc ions for highly reversible zinc anodes

Stabilization of Zn Anode Via a Multifunctional Cysteine Additive

Tuning the Electrode/Electrolyte Interface Enabled by a Trifunctional Inorganic Oligomer Electrolyte Additive for Highly Stable and High‐Rate Zn Anodes

Manipulating cation-water chemistry to inhibit hydrogen evolution of zinc metal anodes

Concentrated weak hydrated electrolytes towards ultra-stable high-voltage zinc ion batteries