Abstract:Finnish-Swedish ice class rules require resistance estimation of ship navigation in a brash ice channel with a certain condition. The resistance is often evaluated by model experiments. The authors have been developing a numerical estimation method on the basis of physically-based modelling. The developed method can evaluate ship resistance qualitatively, but quantitative estimation and validation were insufficient. To validate the numerical evaluation method, they conduct numerical simulations of model tests and compare results with model test results by Wang et al. (IJOPE (19), 2009, 206-213). They develop a numerical model of model CCGS Terry Fox that was used in Wang et al. (2009). Simulation conditions were prepared to simulate the model test. The size of ice pieces is 99 mm×99 mm×23 mm, and the number of ice pieces is 96000. Four carriage velocities are examined: 0.10 m/s, 0.30 m/s, 0.55 m/s and 0.71 m/s; these correspond to those of the model tests. As a result, the resistances are close each other. At carriage velocities 0.10 m/s, 0.55 m/s and 0.71 m/s, the simulation results are in agreement with experimental results within the limits of plus-or-minus standard deviations. At carriage velocity 0.30 m/s, the simulation result is lower than the experimental results minus the standard deviation, although these are close each other. The tendencies of relationship between the carriage velocity and resistance are, however, somewhat different between the simulations and the experiments. In the numerical simulations, unphysical adhesion of ice pieces on the ship hull at the bottom and unphysical oscillations are observed. At this time, the authors do not know how to fix the above issues.

Thermodynamic Modeling of the Ice Channel Evolution Taking into Account the Brash Ice Accumulation Features

Geometric Model on the Evolution of Brash Ice Channels

Modeling of Brash Ice Channel And Tests With Model CCGS Terry Fox

Resistance Evaluation of Ship Navigation in Brash Ice Channels with Physically Based Modeling

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

Resistance Performance of a Ship in Model-Scaled Brash Ice Fields Using CFD and DEM Coupling Model

Validation of Numerical Estimation of Brash Ice Channel Resistance with Model Test

Numerical Simulation Study on the Ice Load and Ship Motion Response in Formation Navigation in Brash Ice Channels

Experimental-analytical method for determining the global ice load from ice compression on ships and floating platforms used as polar drifting observatories

A Numerical Prediction of the Resistance of Bulk Carriers in Brash Ice Channels

Numerical Simulation Study on Ship–Ship Interference in Formation Navigation in Full-Scale Brash Ice Channels

A CFD-DEM-FEM coupling method for the ice-induced fatigue damage assessment of ships in brash ice channels

Ice model crevice effect on vertical water-entry of a sphere

Numerical Simulation of an Ice-Strengthened Bulk Carrier in Brash Ice Channel

Numerical Simulation of the Flowing of Ice Slurry in Seawater Pipe of Polar Ships

Research on ship-ice collision model and ship-bow fatigue failure mechanism based on elastic-plastic ice constitutive relation

Modeling the morphogenesis of brine channels in sea ice

Validating Material Models and Yield Criteria for Prediction of Impact Pressure

Observations of Snow–Slush–Snow Ice Transformation and Properties of Brash Ice in Ship Channels

The influence of waves and hydrodynamic interaction on energy-based evaluation of ice loads during a glancing impact in sea states

Nonlinear ice sheet/liquid interaction in a channel with an obstruction