Abstract:The object of research is a civil mainline aircraft with a transonic truss-braced wing. The problem of designing an aircraft of this scheme at the preliminary design stage is being solved in the work. The results of the work include the concept of designing aircraft with a transonic truss-braced wing, the main advantages of such a scheme, the process of determining the geometric parameters of the truss-braced, features of the preliminary design of an aircraft with an extremely high aspect ratio truss-braced wing, possible approaches to the arrangement of units and their mutual arrangement. The results are explained by the difference in the design model (the cantilever beam is replaced by a beam on two supports) in mass analysis and the increased wing aspect ratio in aerodynamic calculation. The final data are based on a statistical study to determine the basic geometric parameters of assemblies of modern mainline passenger aircraft, synthesis of parameters of analog aircraft. For example, an aircraft capable of carrying 250 passengers over a distance of 13.000 km is considered. In the design process, values of aspect ratio, taper ratio, wing area, vertical tail and horizontal tail area ratio, and fuselage dimensions are accepted. Drawings of the general appearance of the aircraft have been developed and, based on it, a master geometry of the theoretical contour has been constructed. Graphs of first-order polar and maximum lift-to-drag ratio have been plotted, the reduction of aerodynamic drag in percentage terms has been determined, and the increase in aerodynamic lift-to-drag ratio in percentage terms for an aircraft with an extremely high aspect ratio truss-braced wing compared to similar characteristics of an aircraft with a conventional non-braced wing has been calculated. The approximate mass savings when using a truss-braced wing on the aircraft are determined in percentage terms. The expediency of using wings of greater aspect ratio, than modern aircraft currently have, has been justified. The expediency of using a brace for the aircraft with an extremely high aspect ratio wing has been justified. The obtained results can be used in practice in the process of developing the preliminary design of an aircraft with a truss-braced wing or in the modifications of existing aircraft to increase their fuel efficiency or increase the durability of wing elements due to reduced loads acting on them.

Aircraft turnaround time estimation in early design phases: Simulation tools development and application to the case of box-wing architecture

A DoE-based approach for the implementation of structural surrogate models in the early stage design of box-wing aircraft

An Assembly Gap Control Method Based on Posture Alignment of Wing Panels in Aircraft Assembly

Evaluation of Residual Clearance after Pre-Joining and Pre-Joining Scheme Optimization in Aircraft Panel Assembly

A CFD-Based Collaborative Approach for Box-Wing Aircraft Aerodynamic Assessment: The PARSIFAL Study Case

Determination of the features of integrated design of civil long-range aircraft with transonic truss-braced wing at the preliminary design stage

Stream Life Cycle Assessment Model for Aircraft Preliminary Design

Rotorcraft fuselage mass assessment in early design stages

Preliminary Analysis of the Stability and Controllability of a Box-Wing Aircraft Configuration

A Simulation Framework for Aircraft Take-Off Considering Ground Effect Aerodynamics in Conceptual Design

Studies on Coupled Flight Dynamics and Aeroelasticity of a Prandtlplane Configuration

Beyond Conventional: An Integrated Aerostructural Optimization Approach for Innovative Tailplane Configurations

Topology Optimization Procedure of Aircraft Mechanical Components Based on Computer-Aided Design, Multibody Dynamics, and Finite Element Analysis

An efficient implementation of aeroelastic tailoring based on efficient computational fluid dynamics-based reduced order model

A Robust Sustainability Assessment Methodology for Aircraft Parts: Application to a Fuselage Panel

Integrating Life Cycle Assessment in Conceptual Aircraft Design: A Comparative Tool Analysis

An Efficient Implementation of Transonic Aeroelastic Tailoring based on a Reduced-Order Model using Structural Dynamic Reanalysis Method

Multi-Fidelity Design Optimization of a Long-Range Blended Wing Body Aircraft with New Airframe Technologies

An Aircraft Aerodynamic-stealth Multi-disciplinary Quick Conceptual Optimal Design Method

Reliable method of aerodynamic analysis using computational fluid dynamics and scaled models in the development process of a Very Light Airplane

Virtual shimming simulation for smart assembly of aircraft skin panels based on a physics-driven digital twin